co
co
.... N
" N .... 0
0
Vl c:o
Entering an address
Appl ies to: vehicles with navigation system
.,. Press t he I NAV/MAPI button repeated ly until
t h e
Ent er de stination menu is d isplayed
¢ page 135, fig. 118 .
.,. Se lect : left control button > Ente r address .
-Se lect and confirm a line (s uch as Street , H ouse
numb er or Country /state )
and enter t he de
s ired information.
- Se lect and confirm
Start rou te guidanc e.
Setting a destinat ion from the map
Appl ies to: vehicles with navigation system
A point on the map can be used as the destina
tion.
.,. Press the I NAV/MAPI button repeatedly until
the map is d isplayed .
-Adjusting the scale : turn the control knob to
the left/right to decrease the map sca le.
- Acti vating c rosshairs : press the control knob.
The crosshairs are shown on the map .
-Mo ving the crosshairs : move the crosshairs to
the destination using the MMI touch contro l
pad .
-Setting as dest inat ion : press the control knob
when the crosshairs are shown . If necessary,
select and confirm
Add as stopover and then
Start route guidance.
- Hiding the cro ssha irs :
press the I BACKI button .
Additional info rmation about the location of
the crossha irs :
if you select map content wi th
crossha irs, the avai lab le information is d isplayed
(such as the name of the c ity or points of inter
est) ®¢
page 143, fig . 124 .
Navigation
Setting a home address/favorite as the
destination
Applies to: vehicles with navigation system
You can quickly and easily start rout e guidance
to your home address using the home address
function. Favorites allow easier access to fre
quently used destinations.
.,. Press the INAV/MAPI button repeatedly unti l
t he
Enter destination men u is displayed
¢ page 135, fig . 118 .
Setting a home address as the destination
Requirement: a home address must be stored
¢page 141.
Your home address is directly shown in the Enter
destination
menu @¢page 135 , fig . 118 .
-Select and confirm the home address.
- Select an d confirm
Start route guidance.
Setting a favorite as the destination
Requirement: a dest inat io n must be stored as a
favorite ¢
page 141.
-Enter one or more letters into the free text
search input fie ld. The favo rites that are found
are shown in the Infotainment system display
a nd marked w it h t he symbol ©¢
page 1 35,
fig. 118.
- Sele ct and confirm the des ired favorite.
- Select and confirm
Start route guidance .
(D Tips
-Add itiona l setti ngs for the home address
can be fo und under ¢
page 141 .
-Add itiona l settings for the favorites can be
found under ¢
page 141.
137
Navigation
Transferring a destination from the directory
A pplies to: ve hicles w ith navigation system
You can navigate directly to destinations in the
directory.
Fig. 119 Possible stored locat ions in the directo ry
Requirement: an address with navigation data or
a destination must already be assigned to a con
tact.
• Press the
I NAV/MAPI button repeatedly until
the
Enter destination menu is displayed
¢page 135, fig . 118.
• Select: left control button > Directory > a con-
tact.
The directory/contacts are shown in alphabetical
order and are marked w ith symbo ls to ind icat e
the storage location :
(D Business address
@ Private address
@ Business destination
© Private destination
- Select and confirm an address or a destination.
When you have selected a destination, route
guidance starts immediately.
- Check the address input again when select ing
an address.
- Then select and confirm
Start route guidance .
Additional directory functions in the navigation
system can be found under¢
page 141.
(D Tips
-Addresses that have been imported from
your cell phone into the MMI can also be
used as a destination.
138
-If a contact is grayed out in the directory,
this contact does not have a destination or
an address assigned to them.
Entering a point of interest
App lies to : vehicles wit h navigat ion syste m
Fig. 120 Entering a point of interest
.. Press the I NAV/MAPI button repeatedly until
the
Enter destination men u is displayed
r=;,p age 135, fig. 118 .
• Sele ct: left control button > Points of interest .
- Changing the search area:
select and confirm
Search area > a search area from the list .
-Searching for a point of interest in a specific
category :
select: Select category > desired cat
egory ,
such as Restaurants .
The following search categor ies are available:
Nearby : points of interest can be selected from
different categories. The points of interest are
listed starting from the vehicle position up to a
r ad ius of approximately 124 miles (200 km).
Along the route: points of interest along the
route can only be selected during active route
guidance. The points of interest are located di
rectly along or in the immediate vicin ity of the
calculated route .
Near destination /Near stopover : the points of
interes t can likewise be selected from d ifferent
categories in the vicinity of the destination or
stopover . For example, you can search for a hotel
or parking lot at the destination.
In new city : enter the name of the desired city .
Points of interest can be selected from various
categories . This function allows you to search for
points of interest in any city regardless of the ac-
tive route guidance or the vehicle position . .._
Navigation
Adding a stopover
Applies to: vehicles w ith navigation system
You can enter an additional destination when
route guidance is active.
Fig. 121 Example: current route guidance with stopove r
Requirement: a destination must already be en
tered .
.. Press the
I NAV/MAPI button repeatedly until
the
Enter destination menu is displayed
c:> page 135, fig . 118.
Entering a destination as a stopover
-Enter a destination in the input line (D
c:>page 135, fig . 118.
- Select and confirm a destination from the re-
sults list.
- Se lect and confirm
Add as stopover .
Deleting a stopover
- Turn the control knob to the left until the active
route guidance is shown.
- Select and confirm
Delete stopover c:> fig. 121
under the stopover (D. Select and confirm the
system prompt if necessary. Th e stopover is de
leted.
Additional options when entering a
destination
App lies to : ve hicles w ith navigation system
.. Press the right contro l button.
Depending on the selected function, the follow
ing options may be available when entering a
destination:
l) Thi s fun ctio n is not offe re d in Mexico .
140 Cancel route
guidance:
Requirement: route guid
ance must be active. Route guidance is canceled.
For additional information, see
c:> page 140.
Map settings : see c:> page 145.
Navigation settings : see c:> page 141.
Voice guidance : see c:> page 142.
Route criteria: see c:> page 142.
Show location on map : Requirement: you m ust
have selected a destina tion from the results list.
The destination entered is displayed on the map.
Parking at this location: Requirement: you must
have selected a destination from the results lis t.
A ll parking options near the selected location are
displayed in the Infotainment system .
Delete: the selected entry is deleted. Yo u can de
lete indiv idual entries or all entr ies (for examp le,
favorites or la st destinations).
Audi connect at this location1>: Requ irement:
you must have selected a destination from the
results list. Allows yo u to search for it ems in the
vicinity of the selected location, such as
City
events or Travel information .
Online traffic data *:
receiving online traffic infor
mation
c:> page 147 can be switched on or off.
Country/state selection: select all countries/
states from the list(~) that should be included
in the free text sea rch
c:> page 136.
Store as favorite : see c:> page 141.
Cancel route guidance
Applies to : vehicles wit h navigat ion syste m
Requirement: route guidance must be active .
.. Push the control knob up. Th e active route
guidance is displayed
c:> page 140, fig . 121 .
.. Select and confirm Delete destination or De
lete stopover
under the desired lines
c:> page 140, fig. 121 . The destination is delet
ed .
Or : select the right control button > Cancel
route guidance .
co
co
.... N
" N .... 0
0
Vl c:o
Home address
Applies to: ve hicles with navigation system
~ Press the I NAV/MAPI button repeatedly until
the
Enter destination menu is displayed
¢ page 135, fig . 118.
Storing a home address
- Se lect and confirm Home address
@¢page 135, fig. 118 . After opening the
home address for the first time, you will be
asked to create a home address.
- Se lect and confirm
Create now.
- Enter a destination or select a destinat ion from
the list.
Or :
-Se lect and confirm a destination > right control
button >
Store as home address .
A home address will be stored in the MMI regard
le ss of the connected cell phone. This home ad
d ress is always available even if a cell phone is
not connected to the MMI.
Editing the home address
-Select Home address @¢ page 135, fig . 118 .
-Select : right contro l button > Edit home ad -
dress .
-Se lect and confirm a new dest inat ion as the
home address.
The selected destination is stored as the new home address.
Favorites
Applies to: ve hicles with navigation system
~ Press the I NAV/MAPI button repeatedly until
the
Enter destination menu is displayed
¢page 135, fig. 118.
-Storing an existing destination as a favorite :
search for the desired destination using the in
put f ield.
Or: select and confirm a dest ination
from the list. Select: right control button>
Store as favorite .
- Renaming favorites :
select: left control button
>
Favorites > a favorite from the list> right
contro l button >
Rename favorite.
- Moving favorites :
select the left control button
>
Favorites > a favorite from the list> right
Navigation
control button > Move favorite. Select and con
firm the desired position.
- Deleting favorites : select and confirm a favo r
ite > right control button >
Delete this favor
ite
I Delete all favorites.
Di rectory contacts
Applies to : vehicles wi th navigat ion syste m
Two addresses (private/business) can be as
signed as destinations for each contact in the di
rectory.
~ Press the I NAV/MAPI button repeatedly until
the
Enter destination menu is displayed
¢page 135, fig. 118.
Storing a destination as a contact in the
directory
Requirement: a cell phone must be connected to
the MMI.
- Select:
a destination > right contro l button >
Add destination to contact.
- Select and confirm Add business destination or
Add private destination.
-Enter a name . Or: select and confirm a directo
ry contact from the list.
- Select and confirm
Save business card.
Additional settings
Navigation settings
Applies to: vehicles wit h navigat ion syste m
~ Press the INAV/MAPI button repeatedly until
the
Enter destination menu is displayed
¢ page 135, fig. 118.
~ Select: right control button> Navigation set-
tings .
Depend ing on the selected function, the fo llow
ing settings can be selected :
Show alternative routes
Up to three route suggest ions and their proper
ties are d isplayed on the overv iew map when the
function is switched on~-See
c;, page 142, Dis-
playing alternative routes . ...,
141
Navigation
Low fuel warning
A messag e is displ aye d if the fuel ga uge goes be
low the reserve mar king when this f unct ion is
sw itche d on ~- Confirming t his message displays
a list of gas stations in the area. When a gas sta
tion is selected, ro ute gu idance from the c urrent
veh icle position is calcu lated.
Notification when nearby*
T he notification w hen near by is s witched off at
the facto ry.
T he MM I notifi es you whe n you a re app roa ching
selec ted po ints o f interes t whe n this func tion is
sw itche d on ~- You can a lso have a
Notification
tone.
Presentation mode
T he p rese ntat ion mode he lps yo u to plan and fo l
low a route wi tho ut m ov ing the veh icle. Y ou ca n
Select starting point when yo u wo uld like to cal
cula te a route sta rting from a locat ion other than
the vehicle pos ition . Start presentation mode to
sim ulate route guidance.
Route criteria
Applies to: vehicles with navigation system
Jl
Fig. 122 Possible route c riteria
.. Pres s th e I N AV/MAPI button repeate dly until
the
Enter destination menu is disp layed
c::;, page 135, fig. 118 .
.. Se lect: rig ht contro l butto n > Route criteria.
(!) HOV lane s/carpool lanes1l: whe n the Avoid
fu nction is switc hed o n, HOV lanes or carpool
lanes are not incl uded in the route calc ulation.
l) High occupa ncy vehicle
142
With allow , th e MMI will gui de you using HOV
and ca rpool lanes an d it will indicate them .
@Highways /@ Toll roads / @ Ferries : if the n avi
g ation sys tem should not incl ude highw ays, toll
r oads or ferries -if poss ible -when calculat ing
routes, you can select the
Avoid f u nction .
Voice guidance
Applies to: vehicles with navigation system
.. Press the I NAV/MAPI button repeatedly unti l
the
Enter destinat ion men u is displayed
c::;,page 135, fig. 118.
.. Select : right control button> Voice guidance.
Voice guidance :
voice guidance can be complete
or shortened . With the Traffic function, voice
guidance prompts are o nly given when there are
traff ic incid ents on your route. Whe n
Off is se
l ect ed, no voice guid ance is given.
Voice guidance during phone call : voice guid
ance d uring a phone call can be switched on or
off.
Entertainment fader : c::;, page 178.
Voice guidance volume : c::;, page 178.
Displaying alternative routes
Applies to : vehicles with navigation system
Fig. 1 23 Alterna tive routes display
Requirement: a dest inat io n m ust be entered and
t h e route guida nce must be started.
.. Press the
I NAV/MAPI bu tton repeatedly u nti l
the
Enter destination men u is displayed
c::;,page 135, fig. 118.
CD co .... N
" N ...... 0
0
Ill co
.. Select: right control button > Show alternative
routes.
Up to three route suggestions and their proper
ties are displayed on the map when this function
is switched on¢ fig.
123.
If available, the following information will ap
pear on the route suggestions:
- Route type (fast@, fast alternative @, eco
nomic route@)
- Distance to the destination and the calculated arrival time
- Heavy traffic along the route including time de
lays
Map
Operating the map
A pp lies to: ve hicles with naviga tion sys tem
Escondido Fwy
Escondido
Fig. 124 Diagram: map with cross hairs tu rned on
Fig. 125 Diagram: map with cross hairs turn ed off
Navigation
The route that was calculated according to the
route criteria you selected is shown on the map.
The special properties of the route (such as ferry
connections) may be displayed @qfig.
123. Ad
ditional information about individua l route crite
ria can be found in
¢page 142 .
Using the control knob, you can select the possi
ble routing for the alternative routes and show
them on map Select and confirm the desired
route that you would like to use for route guid
ance.
143
co
co
.... N
" N .... 0
0
Vl c:o
on highways, possible parking lots and rest a reas
are shown, which you can select as a stopover .
POis along the route
Requirement: route gu idance mus t be ac tive .
Searching for points of interest along you r cur
rent ro ute See
¢ page 138.
Additional options on the map
Applies to: ve hicles with navigation system
.,. Press t he I NAV/MAPI button repeated ly until
the map is d isplayed
¢ page 143 , fig. 125.
.,. Press t he right contro l bu tton.
Depending on the f unction selec ted , the follow
i n g options can a lso be se lected unde r the
Map
menu :
Cancel route guidance : see¢ page 140 .
Map settings : see ¢ page 145 .
Route criteria : see ¢page 142 .
Voice guidance : see ¢page 142.
Navigation setting s: see¢ page 141 .
Online traffic data* : see ¢ page 147 .
Show alternative routes : see¢ page 142.
Parking along the route : parking options near
the veh icle are disp layed.
Save current po sition : you can save your current
ve hicle position as a favor ite ¢
page 141 or save
i t as a contact in the directo ry ¢
page 141 .
Audi connect at this locat ion *: allows you to
search for
City events or Weather at the entered
l ocat io n.
Country info rm ation : you can disp lay the appli
cable urban and rural speed limits for any coun
try/state. This information w ill be automatically
shown to you in the route information @
¢
page 143, fig . 125 when the speed lim it is ex
ceeded, if this function is act ivated ¢
page 14 6.
Avoid route *: when route gu idance is active, the
calculated ro ute w ill avoid the area you have
spec ified (max imum : 12 m i (20 km)), if possible .
The navigation system ca lcula tes a n alternat ive
Na vigation
route. The route to be avo ided that you have en
te red applies only to the cur rent route and must
be set agai n, if needed. The areas you have se
l ected to avoid w ill appea r with red and white
shading on the map .
Map settings
Applies to: vehicles wit h navigat ion syste m
.,. Press the INAV/MAPI button repeatedly until
t he map is displayed
¢ page 143, fig . 125 .
.,. Sele ct: r igh t cont rol b utton > Map settings .
Depending on the selected function, the fo llow
i ng setti ngs can be selected:
Map colors
Day /Night :
the map is displayed with a light/
dar k background.
Automatic : when the lights switch on, the map
colors switch from day to n ight .
Map display
Standard
¢ page 143, fig . 124.
Google Earth * ¢page 146 , fig. 126.
Traffic ¢ page 147.
Map orientation
Destination :
th e map i ndic ates the destin ation
and is or ien ted to the no rth .
2D heading up map /2D north up map : the cu r
r ent vehicle pos it ion is d isplayed . T he map is or i
en ted in the d irect io n of t ravel o r to the no rt h .
3D map : when this func tion is sw itched on, the
cu rrent veh icle posit io n is shown on a three-di
mens iona l map and orien ted in the d irec tion of
t ravel. At a sca le o f 62 mi ( 100 k m) and la rge r,
the ma p orientation is to the north.
Overview : th e en tire route from the veh icle pos i
tion to the des tina tion o r the ne xt stopover is dis
played on the map. The m ap s cale depends on
the leng th of the ro ute a nd adapts au tom atically .
The map is orie nte d to the north .
Ill>
145
Navigation
Route information
The display of route information such as the cur
rent road being driven on, upcoming maneuvers,
traffic information or points of interest along the
route can be switched on/off.
Automatic zoom
On: the map scale is adapted automatically de
pending on the type of road being traveled (ex
pressway, highway, other roads) so that you al
ways have an optimal overview of the road ahead.
The scale is also automatically adapted when
there are upcoming maneuvers to provide a bet
ter detailed view.
Off: the map scale you have chosen is kept .
Map content
Map content, such as traffic information, favor
ites or restaurants, can be displayed or hidden
(~).
Online map display
App lies to: ve hicles with navigation system and Audi connect
With the online map view, you con display the
mop with satellite images.
F ig . 126 Online map view
F ig. 127 Map view with on line Street V iew
Requirement: the requirements for Audi con nect
must be met ¢
page 126.
146
.,. Press the I NAV/MAPI button repeatedly until
the map is displayed.
.,. Select: r ight control button>
Map settings>
Map display
> Google Earth.
The map display is based on data packets re
ceived from the Internet in the form of satellite
images, which are then combined with the road
ways from the
Standard map view. There are two
gigabytes of memory space in the MMI memory
that can be used to temporarily store the map or
navigation data that was rece ived . This is roughly
the amount required for the map/ navigation data
fo r a 2,485 mile (4,000 km) route. As long as the
satellite images loaded for route guidance are
stored, you can use them without having an ac
tive data connection .
Street View
With Street View, you can explore many places in
the world through the eyes of a pedestrian.
Street View is available when the symbol
(J)¢ fig. 126 is displayed in the crosshairs mode.
Activating street view: turn the control knob to a
sca le less than 32 ya rds (30 m) .
The following functions are then available :
-Exploring an area step-by-step : press the con
trol knob when the symbol@ is displayed.
-Zooming in or out on the current view in four
stages :
turn the control knob to the left or to
the right @.
-Navigating in street view: move your finger on
the MMI touch in the desired direction.
Additional information
Showing additional information in the Infotain
ment system display can be switched on in the
Map content menu ¢page 146. To display any
applicable additional information, move the
crosshairs onto an item on the map and press the
control knob.
(D Tips
- The stored online map view data can be de
leted in
Factory settings > Navigation and
online memory
9 page 175.