2017 AUDI TT COUPE flat tire

co
co
.... N
" N .... 0
0
Vl c:o
Wheels
Model/ Tire designation Tire pressure
Engine Normal load Maximum load
(up to 2 people)
front rear front rear
PSI
TT: 245/45 R17 95V
32 2.0L High Performance
4-Cylinder 245/40 R18 93H
All Season
32
245/40 R18 93V 32 High Performance
245/35 R19 93V
35 High Performance
255/30 R20 92V
35 High Performance
TTS: 245/40 R18 93V
32
2.0L High Performance
4-Cylinder 245/35 R19 93V
High Performance
35
255/30 R20 92V
35 High Performance
A WARNING
Please note the important safe­
ty precautions regarding tire pressure
¢ page 265 and load
limits
¢ page 267.
Tires and vehicle load limits
There are limits to the amount of
load or weight that any vehicle
and any tire can carry. A vehicle
that is overloaded will not handle
well and is more difficult to stop. Overloading can not only lead to
loss of vehicle control, but can al­
so damage important parts of the
vehicle and can lead to sudden
kPA PSI kPA PSI kPA PSI kPA
220 29 200 33 230 30 210
220 29 200 33 230 30 210
220 29 200 33 230 30 210
240
32 220 35 240
32 220
240 32 220 36 250 32 220
220 29 200 33 230
30 210
240 32 220 38 260 32 220
240 32 220 39 270 33 230
tire failure, including a blowout
and sudden deflation that can
cause the vehicle to crash.
Your safety and that of your pas­
sengers also depends on making
sure that load limits are not ex­
ceeded. Vehicle load includes ev­
erybody and everything in and on
the vehicle. These load limits are
technically referred to as the vehi­ cle 's
Gross Vehicle Weight Rat­
ing
("GVWR").
The "GVWR" includes the weight of the basic vehicle, all factory in­
stalled accessories, a full tank of
fuel, oil, coolant and other fluids ..
267

Wheels
plus maximum load. The maxi­
mum load includes the number of
passengers that the vehicle is in­
tended to carry ("seating capaci­
ty") with an assumed weight of 150 lbs (68 kg) for each passen­
ger at a designated seating posi­
tion and the total weight of any luggage in the vehicle.
The
Gross Axle Weight Rating
("GAWR") is the maximum load
that can be applied at each of the
vehicle's two axles.
The fact that there is an upper limit to your vehicle's Gross Vehi­
cle Weight Rating means that the
total weight of whatever is being
carried in the vehicle is limited.
The more passengers in the vehi­ cle or passengers who are heavier
than the standard weights as­
sumed mean that less weight can
be carried as luggage.
The Gross Vehicle Weight Rating and the Gross Axle Weight Rating
are listed on the safety compli­
ance sticker label located on the
driver's side B-pillar
c::> page 265,
fig. 198.
A WARNING
Overloading a vehicle can cause
loss of vehicle control, a crash
268
or other accident, serious per­
sonal injury, and even death.
-Carrying more weight than your vehicle was designed to carry will prevent the vehicle
from handling properly and
increase the risk of the loss of
vehicle control.
-The brakes on a vehicle that has been overloaded may not
be able to stop the vehicle
within a safe distance.
-Tires on a vehicle that has been overloaded can fail sud­
denly, including a blowout and
sudden deflation, causing loss
of control and a crash.
-Always make sure that the to­
tal load being transported does not make the vehicle
heavier than the vehicle's
Gross Vehicle Weight Rating.
Determining correct load
limit
Use the example below to calcu­
late the total weight of the pas­
sengers and luggage or other
things that you plan to transport
so that you can make sure that
your vehicle will not be overload- ed . ..

co
co
.... N
" N .... 0
0
Vl c:o
Steps for Determining Correct Load Limit
1 . Locate the stat em ent "THE
COMBINED WEIGHT OF OCCU­ PANTS AND CARGO SHOULD
NEVER EXCEED XXX KG OR X XX
LBS "on your vehi cle 's pla card
(tire inflation pr essure l abel)
¢ pag e 265 , fig. 198.
2 . Determine the combined
weight of the dri ver and pa s­
sengers that will be riding in
your vehicle.
3. Subtract the comb ined weight
of the driver and passengers
from
" XXX " kilograms or "XXX "
pounds shown on the sticker
¢ page 265, fig. 198 .
4. The resulting figure equals the
available amount of cargo and
luggage load ca pac ity. For ex­
ample, if the
"X XX" amount
equals 1400 lbs and there w ill
be five 150 lbs passengers in
your vehicle , the amount of
available cargo and luggage
load capacity is 650 lb s
(1400- 750 (5
X 150) = 650 lbs)
5. Determine the combined weight of luggage and cargo being loaded on the vehicle.
Th at weight ma y not safely ex­
ceed the a vailable cargo and
Wheels
luggage load capa cit y ca lc ulat ­
e d in Step 4.
6. If your vehicle will be towing a trailer, load f rom your trail er
will b e tran sferred to your ve­
hicle . Con sult thi s manual to
det ermine how this reduces
the a vailable cargo and lug­
gage load c apacity of your vehi ­
c le.
.,,.Check the tire sidewall
(¢ p age 255 , fig. 196) to deter­
mine th e designated lo ad rating
for a spe cifi c tire .
Wheel bolts and rims
Wheel bolts
Whee l bo lts must be clean and loosen/tig hte n
easily.
Rims
Rims with a bo lted r im ring* or with bolted w heel
cove rs* cons ist of mult iple p ieces . These compo­
nents were bolted togethe r using spec ial bolts
and a spe cial pro ced ure. Yo u m ust no t repai r or
disasse mble them
c::> ,&. .
_& WARNING ~ -
Wheel bo lt s th at are tightene d or rep aired in­
cor rect ly can become loose and resu lt in loss
of vehicle co ntro l, w hich increases the risk of
an accident. For t he cor rect tighten ing speci fi­
cation, see
c::> page 286, Finishing .
-Always keep the wheel bolts and the
threads in the wheel h ub clean and free of
grease.
- Onl y use wheel bolts that fit the rim.
- Always have damage d rims repaire d by an
author ized Audi dealer or author ized Audi
Serv ice Facility . Never repair o r disassemb le .,,.
269

co
co
.... N
" N .... 0
0
Vl c:o
@ Tips
When using snow chains, it may be useful to
switch on sport mode¢
page 89.
Low aspect ratio tires
Your Aud i is factory-equipped with low aspect ra­
tio tires. These t ires have been thoroughly tested
and been selected specifically for your model for
their supe rb performance, road feel and handling
u nder a va riety of d riving conditions. As k your au­
thor ized Audi dealer for mo re details.
The low aspect ratio of these t ires is indicated by
a numeral of
55 or l ess in the tire's size designa­
tion. The numera l rep resents the rat io of the
tire's sidewall he igh t in relat io n to its tread w idth
expressed in pe rcen tage. Conventional t ires have
a height/w idth rat io of 60 or more .
The performan ce of low -a spe ct-ratio tire s is par­
ticular ly sen sit iv e to improper inflation pre s­
s ur e. It i s therefore import ant that low a spect
ratio tire s are infl ate d to the specified pre ssure
and that the inflation pre ssure i s regularl y
c hecked and mai nta ined . Tir e pre ssure s should
b e che cked at least once a month and alw ay s
before a long tri p ¢
page 265.
What you can do to avoid tire and rim
damage
Low aspect ratio tires can be damaged more easi­
ly by impact with potholes, curbs, gullies or
ridges on the road, particularly if the t ire is un­
derinflated .
In order to minimize the occurrence of impact
damage to the tires of your vehicle, we recom­
mend that you observe the follow ing precau­
tions:
- Always maintain recommended inflation pres­
sures. Check your tire pressure every 2,000
miles (3,000 km) and add a ir if necessary .
- Drive carefully on roads with potho les, deep
gul lies or ridges. The impact from driving
t h rough or ove r such obstacles can damage
you r tires. Impact w ith a curb may also cause
damage to your tires.
Wh eel s
- After any impac t, immed iate ly inspect your
tires or have them inspected by the nearest au­ thorized A udi dealer. Replace a damaged tire as
soon as possible.
- Inspect your tires every 2,000 mi les (3,000 km)
for damage and wear. Damage is not a lways
easy to see. Damage can lead to loss of air and
underinflation, wh ic h could eventually cause
tire fa ilure . If you believe that a t ire may have
been damaged, replace the tire as soon as pos­
sible.
- These tires may wear more quickly than others.
- Please also remember that, while these tires
delive r responsive handling, they may ride less
comfortably and make mo re noise than other
choices.
Reduced pe rfo rmance in winter /cold season
conditions
All t ires are des igned for certai n purposes. The
low aspect ratio, ultra h igh performance tires
o rigi na lly installed o n your vehicle are intended
fo r m aximum d ry and wet road per formance and
handling . They are not sui table for co ld, snowy or
icy weather conditions . If you drive under those
circumstances, you should equip yo ur vehicle
with all-season or winter tires, which offer better
tract ion under those conditions. We suggest you
use the recommended snow or all-season tires
specified for your veh icle, or their equivalent.
Refer to¢
page 2 70 for more detailed informa­
t ion regarding winter tires.
Uniform tire quality grading
-T read wear
- Traction AA A 8 C
- Temperature ABC
Quali ty g rades can be fo und whe re applicable o n
the tire side wall between tread sho ulder and
maximum section width
¢page 255, fig. 196 .
For exampl e: Tread wear 200, Traction AA, Tem­
peratu re
A .
All passenger car t ires must conform to Fede ral
Safety Req uirements i n addit io n to these grades . .,,_
271

Wheels
Tread wear
The
tread wear grade is a compara tive ra ting
based on the wear rate of the t ire when tes ted
under contro lled conditions on a specified gov­
ernment test course.
F or examp le, a tire graded 150 would wear one
and one half (11/2) t imes as well on the govern­
ment course as a tire graded 100 .
The rela tive perfo rman ce of t ires depe nds upon
t he act ua l condi tions of their use, howeve r, and
may depart signif icant ly from the norm due to
variations in d riving hab its, service practices and
d ifferences in road characteristics and climate .
T raction
The
tra ction g rades, from highes t to lowes t, are
AA, A, Band
C. T hose gr ades represen t the t ire's
ab ility to stop on wet pavement as meas ured un ­
der controlled conditions on specified govern­ m ent test sur faces of asphalt and conc ret e. A tire
marked C may have poor traction performance
¢ &, .
Temperature The
temperature grades are A (the highest), B,
and C, representing the tire's resistance to the
generation of heat and its ability to d iss ipate
heat when tested under controlled conditions on
a specified indoor laboratory test wheel.
Sustained high temperature can cause the mate ­
rial of the tire to degenerate and red uce tire life,
and excess ive temperature can lead to sudden
tire failure ¢&, .
The gra de C corresponds to a leve l of perform­
ance which a ll passenger ca r tires must meet un­
der the Federa l Moto r Vehicle Safety Standard
No. 109. Grades Band A represent higher leve ls
of performance on the laborato ry test wheel than
the m in imum required by law .
A WARNING
-
The traction grade ass igned to this tire is
based on straight -ahe ad braking t ract ion
t e sts, and does not include a ccele rat ion, cor­
nering, hydrop laning o r peak tract ion charac­
teristics .
272
A WARNING
--
The temperat ure grade for th is tire is estab­
lished for a tire that is properly inflated and
n ot overloaded . Excessive speed, underinfla­
tion, o r excessive load ing, either separately or
in comb ina tion, can ca use hea t bu ildu p and
possib le tire f ailure.
A WARNING
Tempe rature g rades apply to tire s th at are
p rope rly inflated and not over o r underinfla t­
e d.
-
Tire pressure monitoring
system
ill General notes
E ach tire, including the spare (if p rov ided),
shou ld be checked monthly when cold and in flat ­
ed to the inflat ion press ure recommended by the
vehicle manufacturer on the vehicle placard or
tire inflation pressure labe l. (If your veh icle has
tires of a different size than the size ind icated on
the ve hicle placard or tire inflat ion press ure la­
bel, you sho uld dete rm ine the proper t ire infla­
tion press ure for those tires).
As a n added safety feature, your vehicle has been
equipped with a tire pressure mon itor ing system
(TPMS) that illuminates a low tire p ressure tell ­
ta le when o ne or mo re of your tires is s ignificant­
l y unde r-inflated. According ly, w hen the low t ire
pressure tell tale illum ina tes, you sho uld stop and
c h ec k yo ur t ires as soon as possib le, and inf late
t h em to the proper p ressure . Dr iving on a sign ifi ­
cant ly under-inflated tire ca uses the tire to over­
heat and can lead to tire fa ilure. Und er- inflation
also red uces fue l eff iciency and tire tread life,
and may affect the vehicle's handling and stop­
ping ability .
P lease note that the TPMS is not a s ubstitute fo r
proper tire maintenance, and it is the dr iver 's re­
spons ibility to main tain correct t ire pressure,
even if under -in flat io n has not reached the level
to trigge r illumination of the TPM S low t ire pres-
su re te lltale . .,.

co
co
.... N
" N .... 0
0
Vl c:o
Your vehicle has also been equipped with a TPMS
malfunction indicator to indicate when the sys­
tem is not operating properly. The TPMS mal­
function indicator is combined with the low tire pressure telltale. When the system detects a
malfunction, the telltale will flash for approxi ­
mately one minute and then remain continuously
illuminated . This sequence will continue upon
subsequent vehicle start-ups as long as the mal­
function exists .
When the malfunction indicator is illuminated,
the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions
may occur for a variety of reasons, including the
installation of replacement or alternate tires or
wheels on the vehicle that prevent the TPMS
from functioning properly . Always check the
TPMS malfunction telltale after replacing one or
more tires or wheels on your vehicle to ensure
that the replacement or alternate tires and
wheels allow the TPMS to continue to function properly.
If the Tire Pressure Monitoring System
indicator appears
The tire pressure indicator in the instrument
cluster informs you if the tire pressure is too low
or if there is a system malfunction .
Using the ABS sensors, the tire pressure monitor­
ing system compares the tire tread circumfer­
ence and vibration characteristics of the individu­
al tires. If the pressure changes in one or more
tires, this is indicated in the Infotainment system
display w ith an indicator light
RE and a message.
If only one tire is affected, the location of that
tire will be indicated.
The tire pressures must be stored in the Infotain­
ment system again each time the pressures
change (switching between partial and full load
pressure) or after changing or replacing a tire on
your vehicle
c::;, page 274 . The tire pressure moni­
toring system only monitors the tire pressure you have stored. Refer to the tire pressure label for
the recommended tire pressure for your vehicle
¢ page 265, fig. 199.
Wheels
Tire tread circumference and vibration character­
istics can change and cause a tire pressure warn­
ing if :
- the tire pressure in one or more tires is too low.
- the tire has structural damage.
- the tire was replaced or the tire pressure was
changed and it was not stored
c::;, page 274.
- the spare tire* is installed .
Indicator lights
RE-Loss of pressure in at least one tire c::;, &,.
Check the tires and replace or repair if necessary.
Check/correct the pressures of all four tires and
store the pressure again in the Infotainment sys­
tem
¢ page 274.
mm (Tire Pressure Monitoring System) Tire
pressure: malfunction! See owner's manual -If
mm appears after switching on the ignition or
while driving and then the indicator light
RE in
the instrument cluster also starts to blink for
about one minute and then stays on permanent­
ly, there is a system malfunction. Try to store the
correct tire pressures
c::;, page 2 74 . If the indica­
tor light does turn off or turns on again after a short period of time, drive to an authorized Audi
dealer or authorized Audi Service Facility immedi­
ately to have the malfunction corrected.
A WARNING
..-
- If the tire pressure indicator appears in the
display, reduce your speed immediately and
avoid any hard steering or braking maneu­
vers. Stop as soon as possible and check the
tires and their pressure.
- The driver is responsible for maintaining the
correct tire pressures . You must check the
tire pressures regularly .
- Under certain conditions (such as a sporty
driving style, winter conditions or unpaved
roads), the pressure monitor indicator may
be delayed.
- Do not use run-flat tires on your vehicle . Us­
ing them when not permitted can lead to
vehicle damage or accidents.
273

CD co .... N
" N .... 0
0
Ill co
Emergency assistance
General information
"' Park the vehicle as far as poss ible from moving
traffic in the event of a breakdown. In the event
of a flat tire, park the vehicle on a leve l surface .
It you are on a steep h ill, be especially careful.
"' Set the parking brake.
"' Place the selector lever in the P position .
"' Switch the emergency flashers on .
"' Have the passengers exit the veh icle . They
shou ld move to a safe place, for example be­
hind a guard rail.
_& WARNING
Follow the steps given above. This is for your
protection and the for the safety of other d riv­
ers .
Equipment
Vehicle tool kit/tire mobility kit/
compressor
F ig . 200 Luggage co mpa rtment : ca rgo floo r closed
The vehicle tool kit, tire mobility kit and com­
p ressor are sto red in the luggage compartment
u nder the ca rgo floor cover.
"' Push on the plast ic handle and lift up the cargo
floor .
"' Open the cargo floor .
Completely ret ract the vehicle jack arm before
storing the vehicle jack* .
_& WARNING
Improper use of the vehicle jac k can ca use se­
r ious personal inju ries .
Em ergen cy a ssis tanc e
-Never use the screw driver hex head to
tighten wheel bolts, since the bolts cannot
attain the necessary tightening torque if you
use the hex head, potentially causing an ac­
cident .
- The factory-supplied jack is intended only
for your veh icle model. Under no circum ­
stances shou ld it be used to lift heavy
veh icles or othe r loads; you risk injuring
yourself.
- Never start the engine when the vehicle is
raised, which co uld cause an a ccident.
- Support the vehicle securely with a ppropri­
ate stands if wo rk is to be pe rformed under­
nea th the vehicle; otherwise, there is a po­
tential risk fo r injury.
- Never use the ja ck supp lied with your Aud i
on ano ther veh icle, p articularly on a heavier
one. The jack is only s uitab le for use on the
veh icle it came with.
(D Tips
The vehicle ja ck* in your vehicle is ma inte­
nan ce-free.
Tire mobility kit
Preparation
App lies to : vehicles wi th tire mo bility kit
"' Read and follow the important safety precau-
tions <=>
page 281 , General information .
"'Set the park ing brake .
"' Select the P selector lever posit ion .
"' Check if a repair wi th the tire mob ility kit is pos­
sible
<=> page 282.
281

co
co
.... N
" N .... 0
0
Vl c:o
~ Install the compressor pressure hose® onto
the flange @ on the tire sea lant bottle @.
~ Insert the sealant bottle with the flange at the
bottom into the opening @ on the compressor
cover.
~ Remove the valve cap from the faulty t ire .
~ Install the filler hose @on the valve (J)
¢fig . 203 .
~ Connect the plug@¢ fig. 202 to a socket in
the vehicle.
~ Switch on the ignition.
Inflating a tire
~ Move the switch @¢ fig. 203 on the compres­
sor into posit ion
I.
~ Inflate the t ire to between 29 psi (200 kPA)
and 36 psi (250 kPA) and read the p ressure on
the gauge.
~ If this tire pressure is not reached, remove the
filler hose. Drive s lowly approximately 33 ft (10
m) forward or in reverse so that the sealant can
be distributed in the tire. Pump up the tire
again¢ .&.,.
A WARNING
-Read and follow the manufacturer's safety
precautions on the compressor and in the
instructions on the bottle of sealant.
- If a tire pressure of 29 ps i (200 kPA) cannot
reached afte r inflating for 6 minutes, then
the tire is too severely damaged. Do not
contin ue driving.
- If the t ire cannot be repaired with the tire
sealan t, see an authorized A udi dealer or au­
thorized Aud i Serv ice Facility for ass istance .
Do not operate the compressor for mo re than
six m inu tes continuously, or it can overheat.
Once the compressor has coo led, you can con­
tinue to use it .
Completing
Appl ies to: ve hicles with tire m obility kit
~ Adhere the sticker that says "max. 50 mph
(max . 80 km/h)" that is provided with the tire
mobility kit within the driver's fie ld of vision.
Em ergenc y ass is tanc e
~ Stop the vehicle a fter driving for about 10 mi­
nutes and check the tire pressure.
~ If the tire pressure is lower than 19 psi (130
kPA), then the tire is too severely damaged. Do
not continue dr iving.
A WARNING
Pay attention to the following afte r repa iring
the tire:
- Do not dr ive faster than 50 mph (80 km/h) .
- Avoid hard acceleration, braking sharply,
and fast cornering.
- The vehicle may become more difficult to
control.
- If the tire is too severe ly damaged, see an
authorized Audi dealer or authorized Audi
Serv ice Facility for assistance.
® For the sake of the environment
You can give the used tire sealant bottle to an
authorized Audi dea ler or authorized Audi
Service Fac ility for disposal.
(D Tips
Remember to obtain a new bott le of sealant
from an authorized Audi dealer or authorized
Audi Service Fac ility after repairing a tire.
Replacing wheels
Preparation
You must complete the preparation before
changing a tire.
~ Read and follow the important safety precau-
tions¢
page 281, General information.
~ Set the park ing brake.
~ Select the P selec to r lever posit ion.
~ Lay out t he vehicle too l kit¢ page 281 and the
spare tire~
page 287 .
A WARNING ~ -
If you are changing a tire on a steep hill, use a
b lock or similar object to b lock the opposite
wheel to prevent the vehicle from moving.
283