2017 AUDI Q3 lock

Check ing and F illing
CJ) Note
- Methanol fuels which do not meet these re­
q uirements may cause corros ion and dam­
age to plast ic and rubber components in the
fuel system.
- Do not use fuels that fail to meet the speci­ fied criter ia in this chapter.
- If you are unable to determine whether or
not a particular fuel blend meets the speci­
ficat ions, ask your service station or its fuel
supplier .
- Do not use fuel for wh ich the contents can­
not be identified.
- Fuel system damage and performance prob­ lems result ing from the use of fue ls differ­
ent from those specified a re not the respon­
s ibility of Audi and are not covered under
the New Veh icle o r the Emiss ion Control
System Warra nties.
- If you experience a loss of fue l economy or
driveability and pe rformance prob lems due
to the use of one of these fuel b lends, we
r ecommend t hat you swi tch to u nblended
fuel.
Gasoline additives
A major concern among many auto manufactur ­
ers is carbon deposit build-up caused by the type
of gasoline you use .
A lthough gasoline grades dif fer from one manu­
facturer to another, they have certain things in
common. All gaso line grades contain substances
that can cause deposits to collect on v ita l eng ine
parts, such as fue l injectors and intake valves. Al­
though most gasoline brands include additives to
keep eng ine and fuel systems clean, they a re not
equa lly effective .
Aud i recommends using TOP TIER Detergent Gas­
oline . For more i nformation on TOP TIER Deter ­
gent Gasoline, please go to the official website (www.toptiergas .com) .
After an extended period of using inadequate
fue ls, built -up carbon depos its can rob your en­
g ine of peak performance .
156
(D Note
-Damage o r mal func tion d ue to poor f uel
quality is no t covered by the Audi New Vehi­
cle Lim ited Warranty .
- Do not ad d aftermar ket fuel addi tive prod ­
ucts to your fue l tank .
Refueling
Fuel filler neck
The fuel filler neck is located on the right rea r
s ide panel behind the fuel fille r flap .
If the power lock ing system shou ld fail , you can
still open the flap manually -fo r detailed instruc ­
tions see
Q page 158.
You can find the fuel tank capacity of your vehicle
i n
¢ page 216.
The label o n the inside of the f uel fi ller flap tells
you the correct fuel for your vehicle. For more in ­
format ion about fuel specifications, see
¢ page 155.
You r vehicle f uel tank has an on-board refueling
vapor recovery system. T his feature helps to pre­
vent fue l vapors from escaping from the tank and
polluting the enviro nment wh ile you refue l your
vehicle . In order to fill the tank proper ly wh ile
protect ing the e nvir onment, please follow th is
r efue ling p rocedure carefully.
A WARNING
U nder no rmal opera ting co nd itions, neve r ca r­
r y addi tional f uel con tainers in your car. Gas
caniste rs and o ther con tainers used to trans ­
port fue l can be dangero us. Such containe rs,
f ull or empty, may leak and could cause a fi re
in a co llision. If you must transport fuel to
use for your lawn mower, snow blower, etc .,
be ve ry ca reful and always observe local and
state laws regarding the use, transportation
and storage of such fuel containers . Make cer­
tai n the co ntai ner mee ts industry s tandards
(A NS I/AS TM F 8S2 -86) .

a:,
a:,
...... N r--. N
'"' 0 0 ::, a:,
(D Note
Never drive your vehicle until the fuel tank is
completely empty. The irregular supply of
fuel can cause misfiring. Gasoline could enter
the exhaust system and damage the catalytic
converter.
Fueling procedure
Fig. 135 R ight rear side of the vehicle: opening the fue l
f iller door
Fig. 136 Fu el fil ler door w ith attached fuel cap
The fuel filler door is unlocked or locked by the
central locking system.
Opening the fuel cap
"" Press on the left side of the fuel filler door to
open ¢
fig. 135.
""Unscrew the tank cap counterclockw ise.
"" Place the cap from above on the open fuel filler
door ¢
fig. 136.
Closing the fuel cap
""Screw the tank cap on to the right on the filler
neck until it cannot turn any farther.
""Then press on the left side of the tank door un­
ti l it latches .
Checking and Filling
Once the pump nozzle switches off, the fuel tank
is "full". Do not fill the tank more . Otherwise the
expansion space in the tank will be filled.
The correct fuel type for your vehicle can be
found on a label located on the inside of the fuel
filler door. For additional information on fuel,
see
¢ page 155.
The fuel tank capacity of your vehicle is listed in
the
Technical Data section¢ page 216.
To avo id fuel spilling or evaporat ing from the fuel
tank always close fuel cap properly and com­
pletely. An improperly closed fuel filler cap may
also cause the MIL lamp¢
page 17 to come on.
A WARNING
Not paying attention when fueling or han­
dling fuel incorrectly can lead to fires, explo­
sions or serious injuries.
- Fuel ignites easily and can cause serious
burns and other injuries.
-
-If you do not switch the engine off when fu­
eling and/or do not insert the fuel nozzle
completely into the tank opening, fuel can
leak out or run over. Leaked fuel can ignite
and start a fire.
- Do not use the telephone while fueling. The
electromagnetic rays can cause sparks,
which can ignite fuel vapors and start a fire .
- Do not sit in your vehicle while fueling. If
you must make an exception and enter your
veh icle aga in while fueling, close the door
and touch metal to discharge static electric­
ity before touching the fuel nozzle. Static
electricity can create sparks, which can ig­
nite vapors when fueling.
- Do not smoke or have an open flame in the
area when fueling your vehicle or filling a
fuel container because this increases the
risk of an explosion.
- For your safety, carrying fuel containers in
your vehicle is not recommended. Whether
full or empty, the container can leak and
cause a fire in the event of an accident.
- If you must make an exception and trans­
port a fuel container, note the following:
157

Checking and Filling
-Never f ill the fuel container with fuel
while it is in or on the vehicle. Stat ic elec­
tricity is d ischarged when filling wh ich can
cause the f uel vapors to ignite and in­
creases the r isk of an explos ion .
- Always p lace a fuel container on the
ground before fi lling .
- Always hold the fuel nozzle comp letely in
the fuel container when fi lling .
- If the fue l conta iner is made of metal, the
fue l nozzle must always be in contact wit h
the conta iner w hen filling it w ith fue l. Th is
prevents static electr ic ity from discharg­
ing.
- Never sp ill fuel in the veh icle or the lug ­
gage compartment . Evaporated fue l is ex­
plosive and increases the risk of se rio us i n­
jury o r death.
- Follow legal requireme nts when usi ng,
s t o ring and tran spo rting fuel cont ainers.
- Ma ke sure the fue l conta iner confo rms to
i ndu stry st anda rds (A NSI/ ASTM F852-86).
0 Note
- Remove spilled fuel from vehicle paint im­
mediately, because it can damage paint.
- Never drive until the fuel tank is completely
empty . The ir regular supp ly of fuel that re­
su lts from that ca n cause engine m isfires .
Uncombusted f ue l w ill enter the exha ust
sy stem a nd incr ease t he risk of damage to
the c atalyt ic converter.
@ For the sake of the environment
Do not ove rfi ll the f uel tank, othe rw ise fue l
can le ak out when the vehicle is wa rm ing up.
(0 Tips
The f uel fi ller door on yo ur vehicle does not
loc k if yo u lock the vehicle from the inside .
158
Fuel filler door emergency release
If the cen tral locking system is faulty, the fuel
filler door can be unlocked manually .
Fig. 13 7 Right side trim panel in t he lugg age compar t­
m ent: eme rge ncy rele ase mecha nis m
T he emergency release mechan ism is located be­
hind the right s ide trim panel in the luggage
compartment.
.,. Remove the cover in t he side panel.
.,. Loosen the loop from the retainer -arrow- and
then pull on the loop carefu lly ¢ @ . The f uel
fill er door releases.
.,. Press on t he left s ide of the fue l filler doo r to
open i t¢
page 15 7, fig. 135.
(D Note
Only p ull on t he loo p until yo u feel res ista nce.
You w ill not hea r it re lease. Othe rw ise you
c o uld d amage the emergen cy rele ase mech a­
nism .
Catalytic converter
It is very important that your emission control
system (catalytic converter) is functioning prop­
erly to ensure that your vehicle is running in an
environmentally sound manner .
.,. Always use lead -free gasoline ¢ page 155, Fuel
supply.
.,. Never r un the tank down all the way to empty .
.,. Never put too much motor oi l in your engine
¢ page 164 .
.,. Never try to push- or tow-start your vehicle .
The catalytic conve rter is an efficient "clean-up"
device built into the exhaust system of the veh i-
cle. The catalyt ic converter burns many of the
lilJ,

Check ing and F illing
areas, into open streams or down sewage
drains .
- Recycle used engine oil by taking it to a used
engine oil collection facility in your area, or
contact a service station .
Cooling system
Coolant
The engine coo ling system is filled wi th a mixture
of pur ified w ate r a nd coolan t addit ive at the fa c­
tory . T h is coo lant must not be not changed.
The coolant leve l is monito red throug h the . in­
d icator light~
page 13 . Howeve r, we do re com­
mend occasionally check ing the coo la nt level
manually.
I f you must add coolant, use a m ixt ur e of wa ter
and coolant addit ive. M ixing the coolant additive
with d istilled wate r is recommen ded .
Coolant additive
The coolant additive is made of a nti-freezi ng a nd
corros ion protection agents . Only use the fo llow­
i n g coolant add it ives. These additives may be
mixed w it h each other.
Coolant additive Specification
G13 TL774J
G12++ T
L 774 G
The amount of coo lant additive that needs to be
mixed wit h wate r depends on the climate where
the vehicle will be operated . If the coolant addi ­
tive percentage is too low, the coolant can freeze
and damage the engine.
Coolant Freeze protec-
additive tion
Warm reg ions min . 40% m in . -13 °F
max . 45% (
- 25
°()
Co ld regions min. 50% max
. -40 °F
max. 55% (-40 °()
0 Note
- Befo re the start of winter, have your author­
i zed Audi dealer or authorized A udi Service
Fac ility check if the coolant additive in you r
166
vehicle matches t he percentage app ropriate
for the climate . This is especially important
when driving in colder climates.
- If the app ropriate coo lant additive is not
available in an eme rgency, do not add any
other additive. You could damage the en­
gine. If this happens, only use water and re­
store the correct m ixture ratio with t he
specified coo lant add itive as soo n as poss i­
bl e.
- Only ref ill w ith new coolant.
- Radiator sealant must not be mixed with
the coolant.
· Adding coolant
Fi g. 14 3 En gin e compartment: coo lant expa nsio n ta nk
cove r
Observe the safety precautions ~.& in Working
in the engine compartment on page 159 .
Checking the engine coolant level
.. Park the vehicle on a level surface .
.. Switch the ignit io n off.
.. Read the coolant level on the coolant expansion
t ank ~
page 162, fig. 140. The coolant leve l
m ust be be twee n the m arkings when the en­
gi ne i n co ld. W hen t he engine is warm it can be
slightly above the upper mar king.
Adding coolant Requirement: there must be a residua l amount of
coolan t in the expansion tank ~(}).
.,. Let the engi ne cool down .
.. Place a clot h over the coolant expans ion tank
cap and unscrew the cap counte rclockw ise
~ .& -

Wheels
and a special procedure. You must not repair or
disassemble them¢&. .
A WARNING
Wheel bolts that are tightened or repaired in­
correctly can become loose and result in loss
of vehicle control, which increases the risk of
an accident. For the correct t ightening specifi ­
cation, see ¢
page 199, After changing a
wheel .
- Always keep the wheel bolts and the
threads in the wheel hub clean and free of grease.
- Only use wheel bolts that fit the rim .
- Always have damaged rims repaired by an
authorized Audi dealer or authorized Audi
Service Facility . Never repair or disassemble
rims yourself, because this increases the risk
of an accident.
Winter tires
Winter tires significantly improve the vehicle's
handling when driving in winter conditions . Be­
cause of their construction (width, compound,
tread pattern), summer tires provide l ess trac­
tion on ice and snow.
.,. Use winter tires on all four wheels.
.,. Only use winter tires that are approved for your
vehicle.
.,. Please note that the maximum permitted
speed may be lower with winter tires
q .&,. . An
authori zed Audi dealer or authori zed Audi Serv­
ice Facility can inform you about the maximum
permitted speed for your tires .
.,. Check the tire pressure after install ing wheels
q page 181.
The effectiveness of winter tires is reduced great­
ly when the tread is worn down to a depth of
0 .157 in (4 mm). The characteristics of winter
tires also decrease greatly as the tire ages, re­
gardless of the remaining tread.
A WARNING
- Never drive faster than the maximum per­
mitted speed for your tires. This could cause
the tires to heat up too much. This increases
186
-
the risk of an accident because it can cause
the tire to burst.
- Always adapt your driving to the road and
traffic conditions . Drive carefully and reduce
your speed on icy or slippery roads . Even
winter tires can lose traction on black ice .
@ For the sake of the environment
Reinstall summer tires at the appropriate
time, because they provide better handling
when roads are free of snow and ice. Summer
tires cause less road noise, tire wear and fuel
consumption .
(D Tips
You can also use all season tires instead of
winter tires. Please note that in some coun­
tries where winter tires are required, only
winter tires with the~ symbol may be per­
mitted.
Snow chains
Snow chains not only improve the driving in win­
ter road conditions, but also the braking.
.,. Only install snow chains on the front wheels .
This applies also to vehicles with a ll wheel
drive* .
.,. Check and correct the seating of the snow
chains after driving a few feet, if necessary. Fol­
low the instructions from the manufacturer.
.,. Note the maximum permitted speed when driv­
ing with snow chains. Do not exceed 30 mph
(SO km/h) .
Use
fine-mesh snow chains. They must not add
more than 0.53 inch (13 .5 mm) in height, includ­
ing the chain lock.
You must remove the snow chains on roads with­
out snow. Otherwise , you could impair driving
ability and damage the tires .
Use of snow chains is only permitted with certain
rim/tire combinations due to technical reasons.
Check with an authorized Audi dealer or author­ i z ed Audi Service Facility to see if you may use
snow chains.

00
00
.-I
"' ,....
"' ...... 0 0 :::,
00
Care and cleaning
Component Situation Solution
Paint
Paint damage Refer to the paint number on the vehicle data label, repair
w ith touch up pa int
c;,poge 215
Spilled fuel Rinse with wate r immediately
Surface rust Rust remover, then protect with hard wax; for questions,
consult an authorized Audi dealer or authorized Audi Serv-
ice Facility.
Corrosion Have
it removed by an authorized Audi dea ler or author-
ized Audi Service Facility.
Water no longer Protect with hard wax (at least twice per year)
beads on the surface
of clean paint
No shine even though Treat with su itable polish; then apply paint protectant if
paint has been pro- the polish that was used does not contain any protectant
tected/paint looks poor
Deposits such as in -Dampen with water immediately and remove w ith a micro-
sects, bird droppings, fiber clloth
tree sap and road salt
Grease-based con- Remove
immediat ely with a mild soap so lution
al and a
taminants such as soft cloth
cosmetics or sunblock
Carbon parts Depos its clean the same way as painted parts c;, page 191
a) Mild soap solution: max im um two tablespoons of neutral soap in 1 quar t (1 liter) of water
Interior cleaning
Component Situation Solution
Windows
Deposits Glass cleaner, then wipe dry
Decorative parts/ Deposits Mild soap solutiona>
Trim
Plastic parts
Deposits Damp cloth
He avier deposits Mild soap solution a), detergent-free plastic clean ing solu-
tion, if necessary
Oisplays/instru -Deposits Soft
cloth with LCD cleaner
ment cluster
Controls
Deposits Soft brush, then a soft
cloth with a mild soap solutiona>
Safety belts Deposits Mild
soap solution al, allow to dry before letting them re-
tract
193

Emerg ency assis ta nce
Folding chocks
Applies to: ve hicles w ith fol ding chocks
The folding chocks* are part of the vehicle tool
kit.
-- -,,,.
F ig. 152 Opening the fo lding chocks
• To use the folding chocks, lift up the support
plate (!)¢
fig. 152 and insert them using both
"tabs" into the slotted holes on the base plate
@ ¢_& .
A WARNING
-The folding chock will not work and can lose
its stability if the support plate "tabs" are
not securely fitted in the slots on the base
plate. If th is is the case, the vehicle could
start mov ing when changing a tire.
- Never use fo ld ing chocks that are damaged
o r that were not assembled cor rectly.
Replacing wheels
Before changing a wheel
Observe the following precautions for your own
and your passenger's safety when changing a
wheel.
• After you experience a tire failure, pull the car
well away from moving t raffic and try to reach
l ev el ground before you stop¢
page 197,
¢_& .
• All passengers shou ld leav e th e car and move
to a safe location (for instance, beh ind the
guardrail)
¢ _& .
• Engage the park in g br ake to prevent your vehi­
cle from roll ing unintentionally ¢_& .
• Move the selec to r l eve r to the P po sition.
198
• If you are towing a trai ler : unhitch the t railer
from your veh icle.
• Take the jac k
¢page 197 and the sp are tire
¢
page 203 out of the luggage compartment.
A WARNING
You or your passengers could be injured while
changing a wheel if you do not follow these
safety precaut ions:
- If you have a flat tire, move a safe distance
off the road . Turn off the eng ine, turn the
emergency f lashers on and use other warn­
ing dev ices to alert other motorists.
- Make sure that passengers wait in a safe
place away from the vehicle a nd well away
from the road and traff ic.
- To he lp prevent the veh icle from moving
suddenly and possib ly sl ipping off the jac k,
always fu lly set the par king b rake and block
the whee l diagonally opposite the wheel be­
ing changed with the folding chocks or oth ­
er objects. When one front whee l is lifted
off the ground, placing the Automat ic
Transmission in "P" (Park) w ill
not prevent
the vehicle from moving.
- Before you change a whee l, be sure the
ground is level and firm . If necessary, use a
sturdy board under the jack.
- Always store the vehicle too l kit, the jack
and the replaced tire in the luggage com­
partment
¢ page 105.
(D Note
If you are changing the wheel on a steep in­
cline, use the folding chock¢
page 198 to
block the opposite whee l to prevent the vehi­
cle from moving.
@ Tips
Obey all laws.

Emergency assistance
Loosening and tightening the wheel bolts
The wheel bolts must be loosened before raising
the vehicle.
Fig. 1 55 Changing a w heel : loosening the w hee l bo lts
Loosening
• Inst all the wheel bolt wrench ove r th e whee l
bolt and push it down as far as i t will go.
• Take tight hold of the
end of the wrench handle
and turn t he whee l bolts
counter-clockwise
about one single turn in the d irection of arrow
q fig . 155.
Tightening
• Install the wheel bolt wrench over the whee l
bolt and push it down as far as it will go.
• Take tight hold of the
end of the wrench handle
and turn each whee l bolt
clockw ise until it is
seated.
A WARNING
- Do not use force or hurry when changing a
wheel· you can ca use the vehicle to sl ip off
t h e jack and cause s erious pe rsonal injur ies.
- Do not loosen the whee l bolts mo re than
one turn
before you ra ise th e vehicle with
t h e ja ck .· You risk an i njur y.
(O} Tips
-Neve r use the he xagonal socket i n the han­
dle of the screwd river to loosen or tighten
th e w heel bo lts.
- If a wh ee l bolt is very t ight, you may fi nd it
eas ier to loosen by carefully push ing down
on th e end of th e wh eel bo lt wren ch wi th
one
fo ot on ly. As you do so, hold on to t he
200
car to keep yo ur ba lance and ta ke c are not
to slip.
Raising the vehicle
T he vehicle must be lifted wit h the jack first be ­
fore the wheel can be removed .
Fig. 156 S ill pa nels: mark in gs
Fig . 157 S ill : pos it io nin g the ve hicle jack
The location of the jack po int is indicated by an
i ndenta tion o n the underside of the veh icle
q fig . 15 6.
• Activate the parking brake to prevent the vehi­
cle from rolling uninte ntionally .
• Mov e the se lector lever to the P pos it ion .
• Find the
marking (imp rint) on the s ill that is
nea res t the w heel th at will be ch anged
¢ fig. 156 . Beh ind t he marking, there is a lift­
ing point on t he sill fo r the ve hicle jack .
• Tur n the
vehicle jack located un der the liftin g
point o n the sill to raise the jack until the jaw
¢ fig . 157 @covers the notch on the veh icle
¢ ,& , ¢(D .
• Align the vehicle jack so the jaw@ cove rs the
no tch and the base pla te ® is fla t on t he f loor .
Th e base p late @ must be
vertical unde r the
lif ting poin t@ . ..,_