2017 AUDI A5 CABRIOLET garage door opener

Opening and closing
• Turn the key to position c::> fig. 29@ until all
the windows have reached the desired position .
Convenience closing feature
• Use the emergency key or pu ll the mechanical
k ey out of the master key
c::> page 29.
• Turn the key in the lock of the d river 's door to
the lock pos ition @ unt il the windows are
closed
c::> A .
.&_ WARNING
- Never close the windows inattentively and
without checking -there is risk of injury.
- You must always watch when the windows
are being raised so that no one can be trap­
ped. If you release the key, the closing ac­
t ion is immediately canceled.
- Always read and heed WARN ING
c::> .&. in
General description on page 2
7 .
Correcting window regulator malfunction
-
After disconnect ing the vehicle battery, the one­
t ou ch up and down feature mus t be ac tivated
again.
• Pull and hold the pow er window switch until
the window is completely closed.
• Release the switch and pull the sw itch again for
one second .
Valet parking
Applies to: ve hicles with valet parkin g fu nctio n
The valet parking feature protects the luggage
compartment from unauthorized access .
-
Fig. 30 Glove compar tmen t: valet park ing bu tton
36
You can switch the "valet parking function" on
when someone else is park ing your vehicle. When
the function is switched on, the vehicle can be
driven , locked and unlocked using the master
key, but access to the luggage compartment is
not permitted .
• Take the mechanical key out of the master key
c::> page 29.
• Open the glove compartment c::> page 63.
• Activate c::> fig . 30 the "valet parking" feature by
press ing the
I VA LET I button. The ind icator light
in the switch illuminates.
• Close the glove compartment and lock it with
the mechan ical key.
• Leave the master key with the service pe rsonnel
for parking and keep the mechanical key with
you.
The following buttons are deactivated when the
valet parking function is switched on :
-
~ button on the master key
- Handle in the rear lid
When the valet parking feature is activated, the message
Valet parking activated appears in the
instrument cluster display when you switch the
i gnition on.
Garage door opener
(Homelink)
Description
Applies to: vehicles with garage door opener (Homelink)
Fig. 31 Garag e doo r op ener: examp le s of using with diffe r­
ent systems
You can act ivate various systems such as garage
doors , secur ity systems and home lighting from
i nside yo ur vehicle using the garage door opener .,..

a:,
a:,
...... N
" N ...... 0
0
LL co
(Home link). There are three buttons for this in
the vehicle headliner that can be in used in p lace
of up to three hand-held transm itters.
To operate sys tems using the gar age door open­
er, the three b uttons in the roof headliner must
be programmed first.
A WARNING
Make sure no people or objects are in the im­
mediate v icin ity of the eq uipment when us ing
or programming the garage door opener. Peo­
ple can be inju red and objects can be dam ­
aged if they ar e caught in the eq uipment.
{!) Tips
- Fo r secu rity reasons , we recommend that
you clear the programmed buttons before
se lling the vehicle .
- For additional in format ion about Homelink,
v is it www.homelink .com.
- Fo r Decla ration of Comp liance to Un ited
States FCC and Industry Canada regu lations
¢ page 249.
Operation
App lies to: vehicles with garage door opener (Homelink)
Fig. 32 Head liner: co ntro l uni t
Requirement : The buttons in the roof headliner
must be prog rammed
¢page 37 or
¢
page 37 and the vehicle must be within
range of the system, such as the garage door
ope ner .
.,. Press the button to open t he ga rage door. The
LED @ blinks or tu rns o n.
.,. Press the b utton again to close the garage
doo r.
Open ing and closing
(D Tips
To ope n or close the garage doo r, press the
b utton, but do not hold it for longer than
10 seconds or the garage door opener module
will sw itch to programming mode .
Programming the buttons (version A)
Applies to: vehicles wit h garage door opener (Home Link)
You can program both fixed code and rolling code
systems using this procedure .
Programming or reprogramming buttons
.,. Switch the ignit ion on.
.,. Press and hold the b utton in the roof headliner
¢
page 37, fig. 32 that you would like to p ro­
gram for at least 10 seconds . Or
.,. Select:
!CAR I function b utton> Car systems*
con trol b utton > Vehicle settings > Garage
door opener > Program garage door opener .
If
this pa th is no t availab le, progr am t he but ton
as des cribe d in version B
¢ page 37 .
.,. Follow the i nstr uctions in the MMI.
Erasing button programming
T he prog ra m med butto ns can not be e rased ind i­
vidually. They mu st all be erase d toge ther. Re­
prog ram the b uttons if ne cessary .
.,. Select:
!CAR ! function b utto n> Car system s*
cont rol b utton > Vehicle settings > Garage
door opener > Clear program settings > Yes .
Displaying the version/status/country code
.,. Select : !CAR l function button> Car syst ems *
cont rol button > Vehicle settings > Garage
door opener > Version information .
(D Tips
-Prog ramming throug h the MMI* is no t pos­
sible with all infotainm ent systems . If th is
is the c ase , p rogra m the button s as des cri­
bed i n vers io n B ¢
page 3 7.
- The requir ed distance betwe en th e hand
tr an smitte r and the Homelink module in
t he radia tor grille ¢
page 38, fig . 33 de­
p en ds on t he system tha t you are p rogram­
m ing .
37

Opening and clo sin g
- De pen ding on the model of the system, you
may need to release the button on the re­
mote control d uring programm ing and
press it aga in. Hold each position you try for
at least 15 seconds before trying another position. Keep the turn sig nals on your vehi­
cle in view when doing t his.
- After programming the garage door ope ner,
i t may be necessary to synchronize the mo­
tor w ith the system. Refer to the ma nufac­
turer's i nstr uctions.
Programming the buttons (version
B)
Applies to: vehicles with garage door opener (Homelink}
F ig . 33 Distance between t he rad iato r g rille and t he hand
transm itter
Programming the button : Part 1 with the
control s
1. Switch the ignition on .
2. Press a nd ho ld both outer buttons in the roof
headliner ¢
page 37, fig. 32 until the LED@
turns off completely (after about 20 sec­
onds). T his procedure clears t he standa rd co­
des that were set at the factory and does
not
need to be repeated again to program the
o ther bu ttons.
3. Br iefly press the b utton o n the roof headline r
that yo u wou ld like to program.
4. Wait until the LED@ begins to blink quickly .
Programming mode is active for 5 m inutes .
5. Move in front of your vehicle while holding
the original remote contro l for the system
that would like to program to a button in the
roof headliner.
38
Programming the button: Part 2 at the
radiator grille
6 . Hold the remote contro l up to the radiator
grille on your vehicle¢
fig. 33.
7. Press and hold the remote control unt il the
turn s ignals on your vehicle blink. This may
take up to 30 seconds .
8 . If the eme rgency flashers bli nk three times,
the p rogramm ing was s uccessful.
If the
eme rgency flashers only blink one time, the
S m inute time limit for the prog ramming h as
ended or the prog ramming was no t success ­
ful. Repeat the prog ramming from t he third
step, or try changing the distance to the radi­
ator grille.
9.
If the garage door or other system does not
open us ing the buttons in the roof headline r
even though the programm ing was success­
ful, the system may use a ro lling code in­
stead of a fixed code .
Rolling code program­
ming must be perfo rmed ¢ page 39 .
The other two buttons in the roof head liner can
be programmed according to the inst ruct ions
above . Begin wi th the third step.
Erasing button prog ramming
The prog rammed buttons cannot be erased ind i­
vidually . They must a ll be erased together . Re­
program the buttons if necessary .
.. Switch the ignit ion on.
.. Press and hold bot h outer buttons in the roof
head liner until the LED@ turns off complete ly
(after about 20 seco nds).
Reprogramm ing th e buttons
.. Switch the ignition on .
.. To reprogram an individ ua l button, p ress and
hold the button unt il the LED @ starts to flash
quickly (after about 10 seconds) . Release the
button immed iately . Programming mode is ac­
t ive for 5 m inutes .
.,. Con tinue with the fif th step.
@ Tips
- Prog ramming using the buttons in the roof
head liner is not poss ible with a ll Infota in­
me nt sys tems.
If t his is the ca se, pr og ra m