<( a, .... N ,....
N .... 0 0
3 a,
.,. Se lect: left control button > Online search . The
search area last set is displayed in the inp ut
field.
- Changing the search area: se lec t the r igh t con
tro l button
> Select search area.
- Sear ching for online de stination s in the se
lected search area :
enter a new city/sta te if
necessary. Enter the search term, such as hotel.
Press the control knob . Select an d confirm an
on line dest inat ion from the list .
-Searching fo r online destination s in a specific
category :
select and confirm Select category .
Select and confirm a category such as Restau
rants .
Find which search areas are available under
c::> page 190, Point of interest search.
You can search for on line dest inat ions using the
voice recognition system
c:::> table on page 156.
(D Tips
Always read t he ch apter c::>p age 178, Audi
connect (Infotainment) information .
Accessing destinations from myAudi
account
Applies to: veh icles with a navigation system and Audi con
nect (Infotainment)
I mport individual destina tions from your myAudi
account into the MMI.
Requirement:
The requ irements for Aud i connect (Infotain
ment) must be met
c::> page 172.
You must have a registered myAudi account at
my.audiusa.com . You must have a vehicle as
signed to your myAud i account and you must
h ave stored one o r more destinations .
.,. Press t he
I NAV /MAPI repeatedly unt il the Enter
destination
men u is displayed c:::> page 187,
fig. 169.
.,. Se lect : left cont rol button > myAudi contacts .
.,. If necessary, ente r you r myAud i user data o r
you r my Aud i PIN
c:::> page 173 . The contacts
stored in myAudi are d isp layed.
- Se lect and confirm a contact .
Navigation
-Sele ct an d confirm a private o r business dest i
nation.
- Sele ct and confirm
Start route guidance.
(D Tips
- Yo u on ly nee d to e nter the myAudi use r da ta
o ne tim e.
- Y ou ca n rece ive your myAudi PIN if yo u have
s e t up a myAu di account.
- Add itiona l information can b e foun d at
www.audiusa.com/audiconnect .
Entering a destination using geo
coordinates
Appl ies to: vehicles with navigation system
.,. Press the I NAV /MAP I repeated Ly until the Enter
destination
menu is disp layed c::> page 187,
fig . 169.
.,. Select: left control button > Geo coordinates .
-Select Latitude /Longitude .
-Press the co ntro l knob to set the individ ua l va l-
ues.
- Turn the control kno b to t he left/ right to
change the selected va lue .
- Sele ct and con firm
Start route guidance.
Adding a stopover
Applies to : vehicles with navigation system
You can en ter an additional destinati on when
route guidance is ac tive.
Fig. 172 Act ive ro u te gu idance w it h stopover
Requireme nt: a dest ina tion m us t alr eady be en
te red .
.,. Press th e
I NAV /MAP I repeated Ly until the Enter
destination
menu is disp layed c:::> page 187,
fig. 169 .
191
Navigation
Entering a destination as a stopover
- Enter a destination in the input line
r=> page 187 .
-Select and confirm a destination from the re-
su lts list.
- Se lect and confirm
Add as stopover .
Deleting a stopover
-Push the control knob up . Free text search and
active route guidance are displayed .
- Se lect and confirm
Delete stopover @
r=>fig . 172.
- The stopover is de leted.
Cancel route guidance
A pp lies to: ve hicles w ith navigation system
Requirement: route guidance must be active .
~ Press the I NAV/MAPI repeatedly until the Enter
destination
menu is displayed r=> page 187,
fig. 169.
~ Turn the control knob to the left until the active
route gu idance is shown
r=> page 191, fig. 172 .
.. Se lect and confirm Cancel route guidance@
r=> page 191, fig . 172. The dest inat ion is delet
ed.
Or : select the r igh t control button> Cancel
route guidance.
Additional options when entering a
destination
App lies to: ve hicles w ith navigation system
Depending on the selected function, the follow
ing additional options may be available when en
ter ing a destination:
~ Press the right contro l button.
Cancel route guidance : Requirement: route guid
ance must be active . Route guidance is canceled .
For additional information, refer
to r=> page 192.
Country information : you can disp lay the appli
cable urban and rural speed limits for any coun
try/state . If this function is activated, the infor
mation will be automatically shown to you in the
route information
(J) r=> page 196 , fig. 177 when
the speed limit is exceeded
r=> page 198 .
192
Country/state selection : select a country/state
(~) that should be used in the free text search,
for example
r=> page 188. Or se lect a ll countries/
states .
Route criteria: refer to ¢ page 196, Route crite
ria.
Show location on map : Requirement: yo u m ust
have selected a destina tion from the results list.
The destination entered is displayed on the map .
Parking at this location*: Requirement: you
must have selected a destination from the re
su lts list . All parking options near the selected
l ocation are displayed in the Infotainment sys
tem.
Delete: the selected entry is deleted. You can de
l ete ind iv idual entries o r a ll entr ies (for examp le,
favorites or la st destinations) .
Audi connect for this location* : Requirement:
you must have selected a destination from the
results list. Allows you to search for items in the
vicinity of the se lected location, s uch as
Travel in
formation .
Online traffic data*:
the online traff ic informa
tion
r=> page 202 can be switched on or off.
Add destination to contact: seer=> page 194.
Store as favorite: refer to r=> page 194.
Voice guidance : refer tor=> page 196.
Navigation settings: refer tor=> page 195.
(D Tips
Information on online traffic data* can also
be found on line at
www.audiusa .com/help/
audi-connect .
(expressway, highway, other roads) so that you
always have an optimal overview of the road
ahead . The scale is also automatically adapted
when there are upcoming maneuvers to provide a
better deta iled view .
Interse ction : when route guidance is active, the
map temporarily zooms in to a detailed scale
when there are upcoming maneuvers so that you
can see the street or properties of the turn bet
ter .
Off : the map scale yo u have chosen is kept per
manently .
Map content
Map contents such as weathe r, traffic informa
tion or favorites can be disp layed or hidden.
The weather forecast is displayed on a 3 mi (5 km) scale o n the map.
Instrument cluster map contents
You can a lso set w hich map content displays in
the instrument clus ter ¢
page 20 .
Online map view
Appl ies to: ve hicles with a nav igatio n system an d Au di con
nect (I nfotainmen t)
With the online map view, you can display the
map with satellite images .
Fig. 179 Online map view
Fi g. 1 80 Map v iew w ith o n line St reet V iew
Na vigat ion
Requirement: the requirements for Audi connect
(Infotainment) must be met
¢page 172.
,. Press the I NAV /MAPI button repeatedly u nti l
t he map is displayed .
,. Select: r ight control b utton
> Map settin gs >
Map di splay > Google Ea rth.
T he map d isplay is based on data packets re
ceived from the Inte rnet in the form of satellite
images, which are then combined w ith the road
ways from the
Stand ard map display . There are
two g igabytes of memory space in the MMI mem
ory that can be used to temporarily store the
map or navigation data that was received . Th is is
roughly the amount required for the map/naviga
tion data for a 2,485 mile (4,000 km) route . As
lo ng as the sate llite images loaded for route
guidance are sto red, you ca n use them w ithout
having an act ive data connec tion.
Street View
With Street View, you can explore many places in
the wo rld t hrough the eyes of a pedestrian .
Street View is avai lab le when t he symbol (!)
¢
fig . 179 is displayed in the crosshairs mode.
Activating street view : turn the control knob to a
sca le less tha n 32 ya rds (30 m).
The following functions are then available :
-Exploring an area step-b y-step : press the con
trol knob when the symbol@¢
fig. 180 ap
pears .
-Zooming i n or out in the cu rrent view in four
stages :
turn the control knob to the left or to
the right @¢
fig. 180.
-Navigating in street v iew : move your finger on
the MMI touch control pad* in the desired di
rection.
Addit ional inform ation
Showing additiona l information in the Infotain
ment system display can be sw itched on in the
Map content me nu¢ page 199. To display any
applicable additional information, move the
crosshairs onto an item on the map and press the
contro l knob . .,.
199
Selecting the online map upd ate
- Se lect an update package from the list(~) @
~fig. 182 .
-Confirm you r se lection with the I BACK I button
and go back to the selection.
- T he number and amo unt of data fo r the select
ed upda te pac kage a re now displayed in the In
f ota inment system.
Starting the download
- Se lect and confirm Start downlo ad .
- Confirm the secur ity prompt by selecting S tart
down load
again.
The update packages begin to down load and the
status of the download progress is shown in the
Infotainment system display .
Install ation of online map upd ates
The downloaded map materia l installs after you
stop your vehicle. The new update packages in
stall only after you switch off the ignition . After
restarting the MMI, the Infota inment system dis
play ind icates if the updates installed successful
l y .
- Confirm the successful update with
OK .
The new map materia l can now be used for navi
gation.
@ Tips
- The amount of available on line map up
dates in the vehicle is lim ited . To update
more regions, use the map update via SD
card at
my.aud iusa.com .
-Always read the chapter ~ page 178, Audi
connect (Infotainment) information.
Accessing traffic
information
Traffic information (TMC)
Applies to: vehicles with navigation system
~ Press the I NAV/MAPI button repeated ly until
<( the map is disp layed. a,
;::; ~ Se lect : left control button > Traffic me ssages . ,....
N .... 0 0
3 a,
Navigation
An overview of all the traffic messages is dis
played in the Infotainment system . Traffic inci
dents on your route are shown in the upper sec
t ion of the list, sorted according to distance.
- Displaying all traffic mes sage s for a street /
highwa y:
select and confirm the [ill symbol. A
list of all the traff ic messages for the selected
street/highway is displayed.
- Opening a detailed view of traffic info rmation :
select and confirm the traffic information from
the list.
-Displ aying the sele cted tr affic information on
the map :
select the right control button >
Show on map . The shaded line shows the
street and the length of the traffic jam.
- Displ aying the n ext traffic info rmat ion on the
map :
press the control knob.
Traffic inf ormation display
Colored warn ing symbol s:
traffic incidents o n
you r route are shown in the upper section of the
list and are sorted according to d istance.
Warning symbol s with .=>: avoided t raff ic inci
dents .
Grayed out warning symbol s: traffic incidents
that are not o n your ro ute. They a re sorted ac
cording to road type (expressway, h ighway, other
road), country and name.
(D Tips
- Cr itica l t raff ic information, s uch as w arn
ings about wrong -way drivers, is automa ti
cally disp layed . To hide the traffic informa
tion, press the
I BACK ! button or the control
knob.
- TM C traffic reports are not available in Can
ada. For more informat ion, please contact
Sirius Canada.
201
Navigation Better route
Applies to: ve hicles w ith navigation system
By receiving traffic information through TMC,
your MMI calculates a better route -if available -
and the possible time saved for the current route
guidance . You can decide yourself which route
you would like to use.
• Press the I NAV/MAPI button repeated ly until
the map is displayed .
Requirement:
Route guidance must be active.
If your MMI has calculated a better route than
the current route guidance, the message
A better
route is available.
appears on the map along
with the time that may be saved . You will be noti
fied of a better route by the
t'S c::> page 196,
fig. 178
symbol in the map view.
Apply better route
-Press the right contro l button.
- Select and confirm the better route.
- The better route is used for the remaining
route guidance and the route is recalculated .
Online traffic information
App lies to: ve hicles w ith a nav igatio n system and Audi con
nect (Infotainment)
The MMI can receive real-time traffic informa
tion about traffic congestion, accidents, road
construction and other incidents from the Inter
net.
Fig. 183 Online traffic in formation display" without better
r o ute
Requirement: the requirements for Audi connect
(Infotainment) must be met c::>
page 172.
202
• Press the I NAV/MAPI button repeatedly until
the map is displayed.
• Select: left control button
> Traffic messages.
An overview of all the traffic messages is dis
played in the Infotainment system
r=> fig. 183.
Traffic incidents on your route are shown in the
upper section of the list, sorted according to dis
tance (!) c::>
fig. 183. The current traff ic message
selected is shown as a map preview in the Info
ta inment system display@c::>
fig. 183 . Colored
mark ings indicate the flow of traffic
c::> page 202.
-Switching online traffic information on: press
the rig ht control button and switch
Online traf
fic data
on ( l~ D. The IONL IN Elsym bol is shown
in the Infotainment system display@
r=>fig.183 .
You can also display the online traffic informa
tion
in the online map view c::> page 199 .
Traffic information display
Color-coded markings along the route indicate
the traffic flow:
Green : traffic is flowing freely
Red: congestion
Orange: stop-and-go traffic
Shaded markings indicate the length of the con
gest ion.
Colored warning symbols: there is a traffic inci
dent immediately a head on the route.
Grayed out warning symbols: traffic incidents
that are not on your route.
Red warning symbols: all warning symbols w ill
be red when route guidance is not active .
The disp lay of colored markings, warning sym
bols, etc. can be set in the
Map content menu
c::> page 199.
Traffic informat ion is switched on at the factory.
You can switch off the recept ion of on line traffic
i nformation at any t i me
r=> page 202 .
(D Tips
-Online traffic information is not availab le in
Canada.
IIJ,,
<( a, .... N ,....
N .... 0 0
3 a,
-Always read the chapter ¢ page 178, Audi
connect (Infotainment) information.
- Having the Online traffic data function
switched on p rovides the most accu rate re
po rts of traffic situations as well as traffic
forecasting . You r vehicle transmits and
processes its anonymous, encrypted posi
tion information at regular intervals to the
Troubleshooting
Applies to: veh icles with navigation system
Problem Solution
Navigation
traffic data prov ider. If you do not want to
use th is, you can sw itch off the
Online traf
fic information
funct ion at any time.
- The
online traffic information netwo rk is
c u rrently not available in a ll countries , and
the coverage is not nationwide. For addi
tional info rmation, visit
www.aud iusa.com/
help /audi-connect .
Free text search:
the desired des - The dest ina tion may not be entered i n the navigation database .
t i na tion cannot be found .
Or: check the spelling of the sea rch term and whether the rig ht
coun try/state was sel ected fo r th e free text sea rch us ing t he
Country /state selection ¢ page 19 2.
203
Radio menu
Fig. 1 89 Examp le of t he radio menu
.,. Se lect: the I RADIO I button > left control but-
ton.
Setting the frequenc y band : select and confirm
the desired freq uency band in the radio menu
c::> fig. 189 . Or: press the I RADIO I button repeat
ed ly until the desired frequency band is set. The
station list is disp layed.
CD Pr esets
The presets list is displayed~ page 207, Pre
sets.
@ Sirius XM alerts*
After you have s to red a Si riusXM alert for your fa
vor ite tracks or a rtists
c::> page 205, an overview
of your favor ite tracks or a rtists c urrently be ing
received on SiriusXM is displayed.
@ SiriusXM*
The Siriu sXM * station list is disp layed.
Additional frequency bands
Depending on the vehicle equipment, you may a l
so be able to select additional frequency bands
@l @c::> fig. 189 in the selec tion menu .
Presets
You can store your favorite stations from every
frequency band in the presets list.
.,. Select : the I RADIO I button > left control button
> Presets.
Storing presets :
Radio
Requirement: the presets. list must be disp layed.
- Select and confirm
a free preset space. Follow
the system instruct ions .
- Select and confirm
a station from the list if
necessary .
Requirement: a station list must be d isplayed.
- Select:
a station from the list> right contro l
button >
Store as preset . Or : press and hold
the contro l knob fo r severa l se conds.
The shortcut keys are automatically assig ned to
the prese ts 1 to 8. You can se lect the stat io ns di
rectly using the preset butto ns
c::> page 147.
- Displ aying the presets li st: se lect: I RADIO I but-
ton >
Presets .
Requirement: the favorites list must be dis
played .
-Listening to preset s: select and confi rm a pre
set from the list.
- Move favorite : select a favorite from the list>
right con trol button > Move favorite . Or : press
an d hold the control knob for seve ral se con ds.
Select an d confirm t he loca tion of the selected
f a vorite .
-Deleting pre set s: selec t a preset from the list >
righ t con trol b utton > Delete preset > Delete
this preset
o r Delete all preset s.
Additional settings
Radio settings
.,. Select: !RADIO I button> r ight cont rol button>
Radio settings .
The following sett ings can be selected, depend
ing on the band that is selected :
Station name s (FM)
Variable:
scrolling text transm itted by the FM
stations is shown in the In fotainment system dis
play .
Fixed : scro lli ng text transmitted by the FM sta
tions is not shown in the Infotainment system
display. Only the current section of the scroll ing
text d isplayed. .,_
207
<( a, .... N ,....
N .... 0 0
3 a,
automatica lly connect to the MM I when
they are within range.
- Multiple Bluetooth audio players can be
connected to the MMI, but only one mobile
device can be active.
- Bluetooth protocols AVRCP (1.0/ 1.3/ 1.4)
and A2DP are suppo rted.
- Note the volume setting o n your Bluetooth
device. Audi recommends setting your mo
bile device to the maxim um vo lume whe n
us ing it as a Bluetooth audio player.
- The supported media functions (such as
shu ffle) depend on the Bluetooth dev ice be
ing used.
- Fo r more information on the supported de
v ices, visit
www.audiusa. com /bluetooth or
contact your author ized Audi dealer.
Wi-Fi audio player
A ppl ies to: ve hicles with Wi· Fi
Using the Wi-Fi audio player media source on the
MMI, you can connect and operate your Wi-Fi-ca
pable media player (such as a smartphone) to
wirelessly ploy music from your media player li
brary. The media player is connected through the
vehicle's Wi -Fi hotspot. A UPnP Server opp or an
integrated UPnPIDLNA server on your media
player is required to access your media player
li
brary.
Req uirement: the W i-Fi function on your media
p layer must be switched on. The
Audi MMI con
nect
app or a UPnP server app must be installed
on your med ia p layer.
O r: you must be using a
media player with an integrated UPnP/DLNA
server.
- Connecting a media pla yer: press the I MEDIA !
button. Press the left control button unt il the
sources overview ¢
page 217 is disp layed. Se
lect and confirm
Wi -F i audio playe r 0
¢page 217, fig . 197.
- If necessary, select and confirm Wi -F i off >
Turn on Wi -Fi
to activate Wi-Fi in the MMI. Se
lect
Wi-Fi options , if necessary. Select the
same settings on the wireless media player
that are used for the Wi-Fi hotspot .
Media
-Starting the W i-F i audio pla yer : start the Aud i
MMI connect
app or a UPnP server app, or set
media permissions on your media p layer.
Operating the med ia pl ayer : the med ia p layer is
operated through the MMI.
- Press the left control button repeatedly until
the
Folders menu item appears . Select and con
firm
Folder s.
- Play ing mu sic from th e m edia player :
select
and confirm
M edi a ce nt er.
,&. WARNING '--
-As the d river, do not allow usage of the Wi-
Fi hotspot to distract yo u from driv ing, as
this could increase the r is k of an accident.
- I t is o nly safe to use tablets, laptops, mo
b ile dev ices and o ther simi lar devices when
the vehicle is s tationary because, like all
loose objects, they co uld be thrown around
the inside of the vehicle in a c rash and cause
serio us inj uries. Store these types of devices
securely while driving.
- Do not use any wireless devices on the front
seats within range of the airbags while driv ing. Also read and follow the warn ings in
¢ page 257, Front airbags.
(D Note
You are responsible for all precautions taken
for data protection, anti-virus protect ion and
protection aga inst loss of data on mobi le de
v ices that are used to access the Internet
through the W i-F i hotspot.
(j) Tips
- The W i-F i aud io player only needs to be
paired one time to the MMI using the Wi-Fi
hotspot. Depend ing on the media player be
ing used, a device that was already paired
w ill connect automatically with the MMI Wi
Fi hotspot when it is within range.
- Always read the chapter ¢
page 178, Audi
connect (Infotainment) information.
- Please note that a Wi-F i connection does
not automatically make it possible to use
the Internet. For addit ional info rmation, re-
fer to¢
page 172. ""
213