2017 AUDI A3 SEDAN display

Cockpit overview
-Muting or pausing: turn the right thumbwheel
down.
Or : press the right thumbwheel.
-Unmuting or resuming: turn the right thumb­
whee l up .
Or: press the right thumbwheel.
@ l1<1 1> 1I button
-Selecting the previous/next track or station:
press the l1<1<1! or lt>~ I button.
-Fast forwarding /rewinding audio files : press
and hold the
! 1«1 1 or lt>t> ll button until the desired
location in the file is reached.
@m button / steering wheel heating [ii
-Steering wheel heating*: For additional infor­
mation, see ¢
page 73.
-Programmable steering wheel button -open­
ing a function :
press the@ button on the mul ­
tifunction steer ing wheel.
-Programmable steering wheel button -re­
questing a function :
press and hold the@ but­
ton .
-Programmable steering wheel button -chang­
ing a function :
Select in the Infotainment sys­
tem:
I MENU I button > Vehicle > left cont rol
button >
Vehicle settings > Steering wheel
button assignment.
@ l~"· I button
-Repeating the last navigat ion prompt : press
the
1 ~ .. v l button when route guidance is act ive.
-Changing the voice guidance volume: when
route g uidance is active, turn the right thumb­
wheel upward or downward during a navigation prompt.
16
Multifunction steering
wheel
Operating
Applies to: vehicles with analog instrument cluster
With the multifunction steering wheel , you can
operate the driver information system as well as
the
MMI functions and you can also adjust the
volume.
Fig. 12 L eft s ide of multifun ction stee ring wheel
Fig. 13 Right s ide of the multifunct ion steer ing wheel
Requirement : the ignition must be switched on .
@Operating the driver information system
The driver information system contains mu ltiple
tabs
(D q page 13, fig. 6 that display various in ­
formation
@ c> page 13, fig. 6.
The following tabs a re available, depending on
vehicle equipment:
First tab Vehicle (tr ip computer)
c>page 18
Second Messages
tabal
Third tab Radio c>
page 19
Media ¢ page 20

CXl CXl .... N ,.__
N .... 0 N > 00
Fourth tab Telephone*~ page 20
Fifth tab Navigation*~ page 21
a) This tab is only v isible when there is at least one ind icato r
l igh t or mess age disp layed .
-Switching tabs : press the !<1 t> I button repeated­
ly until the des ired tab is shown.
- Opening /clos ing the men u: press the I§ but­
ton.
- Selecti ng a funct io n in the menu /list : turn the
left thumbwheel to the desired funct ion.
- Confirming a sele ct ion : press the left thumb­
wheel to confirm your selection.
- Returning to functions at highe r le vels : press
the
121 button.
- Scrolling w ithin lists : turn the left thumb­
whee l quickly.
@ 0button
-Ac cepting a call : press the 0 button when
there is an incoming ca ll.
-Ending a call : press the 0 button during an ac­
t ive phone call.
- Opening the call list : if no phone call is in p rog­
ress and there are no incom ing calls, p ress the
0 button.
@ ~ button
-Switching the voice recogn ition system on :
briefly press the 51 butto n. Say the des ired
command afte r th e
Beep .
- Switching the voic e recogn ition sy stem off :
press and hold t he 51 butto n. Or: say the com­
ma nd
Cancel.
For more information about the vo ice recognit ion
system, see
¢ page 170, Voice recognition sys­
tem.
© Right thum bwheel
You can adjust the vo lume of an aud io source or a
system message (for example, from the voice
recognition system) when the sound is playing .
-Increa sing o r de crea sing the volume : turn the
right thumbwhee l up or down.
- Muting o r pausing : turn the right th umbwheel
down.
Or : press the right thumbwheel.
Coc kpit o ve rv iew
-Unmuting or re suming : turn the right th umb ­
wheel up .
Or: press the right thumbwhee l.
® l~ I / lt>t> li button
- Selecting the pr eviou s/next track or stat ion :
press the !1<1<1 1 or lt>t> I! button.
- Fa st forwarding /rewinding audio fil es: press
and hold the
l 1<1<1 ! or lt> 1>1 I button unti l the desired
location in the file is reached.
@ [ii button I ste ering whe el heating* ~
-Steering wheel heating *: For add it ional infor­
mat ion, see
¢ page 73 .
-Programmab le steering whe el butt on - open­
ing a functio n:
Press the [ii button on the mul­
tifunction steering wheel.
- Programmab le st eering whe el bu tton -re ­
que sting a function :
press and hold the [ii but­
ton.
- Programmab le ste ering wheel b utton - chang­
ing a functio n:
Se lect in the Infotainment sys­
t em:
!MENUI b utton> Vehicle > left control
button >
Vehicle setting s > Steering wheel
button a ssig nment .
0 lq•.vl button
- Re peat ing the la st nav igat ion p rompt :
press
the
1 ~ ... ,I button when route gu idance is active .
-Changing the vo ice guid ance volume : when
route guida nce is act ive, turn the r ight thumb­
wheel upward or downward dur ing a navigation
prompt.
Driver information
system
Trip computer (Audi virtual cockpit)
App lies to : veh icles w it h Audi virt ual coc kpit
Fig. 14 Instrument cluster: fue l consumption display
17

Cockpit over view
Resetting values to zero
Req uirement: the Fuel consumption , Short- term
m emor y or Long-term memo ry
display must be
selected .
~ To reset the value for the respective memo ry to
zero, press and hold the left th umbwheel
Q)
c:> page 13, fig. 7 on the m ultifunction steering
whee l for one second. Or
~ On the multifunction steering whee l, select:
the right control button
> Re set values *.
Adjusting th e additional di splay
~ On the m ultif unct ion steer ing whee l, select the
right control button
> Additional di sp la y .
~ Se lect the desired additiona l display.
Opening the vehicle funct ions
~ Open the first Vehicle tab (trip computer) using
the
l<1 t>I button on t he mult if u nct ion steer ing
whee l.
The fo llow ing displays a re available, depending
on vehicle equipmen t:
- Date and
time ¢ page 241
-Plug- in hybrid drive : Range c:> page 99
- Average consumption
- Short-term memory overview
- Long-term memory overview
- Energy cons umers
c:> page 18
- Driver assistance ¢ page 123
The short-term memory collects driving informa­
tion from the t ime the ignition is switched on un ­
til it is switc hed off. If you cont inue driv ing with­
in two hours after switching the ignition off, the
new values are in clu ded when calculat ing the cur­
rent tr ip informat ion.
Unlike the short-term memory, the long-term memory is not erased automat ica lly . You can se­
lect the time period fo r evaluat ing trip informa­
tion you rself .
Fuel consumption
The cu rrent fuel consumption can be shown us­
ing a bar graph
c:> fig. 14 . The average consump­
tion stored in the short-te rm memory is also dis-
18
played. If the bar is green, your vehicle is saving
fuel through the following function:
- Re cup eration : electrical energy can be stored in
the vehicle battery when the vehicle is coast ing
or dr iving downh il l. T he bar will move toward
0.
Energy consumers*
The Energ y consum ers v iew lists othe r equip­
ment that is cu rrent ly affecting fue l cons ump­
tion . The d isplay shows up to three energy con­
s u mers . The equipment using the most power is
li sted first . If more than three items using power
are switched on, the equipment that is current ly
us ing the most power is displayed. A chart also
shows you the current total of all other consum­
ers .
(D Tips
The date, time of day and time and date for­
mat can be set in the Infota inment system
¢ page 241.
· Trip computer (analog instrument cluster)
Applies to: vehicles with analog instrument cluster
Fig. 15 Inst rument cluster : fuel consumpt ion d isp lay
Resetting values to zero
~ Press the 1§11 button on the mu ltifunction steer­
ing wheel and se lect
Tr ip computer or Efficien­
c y prog ram
in the menu.
~ To reset the value for the respective memory to
zero, press and hold the left
thumbwheel @
c:>page 16, fig. 12 on the multifunct io n steer-
ing wheel fo r one second.
..,.

CXl CXl .... N ,.__
N .... 0 N > 00
Opening the vehicle functions
"'Open the first Vehicle tab (trip computer) using
the
l<1 t> I button on the multifunction steering
whee l.
"' Press the l11ID I button on the multifunction steer­
ing wheel and select
Vehicle functions or Effi­
c iency program in the menu.
The following displays are available, depending
on vehicle equipment:
- T rip computer
O fl o page 19
- E fficiency program ii opage 19
-Digital speedometer
- Ass ist
o page 123
- Lap timer opage 125
-Reduced display
Trip computer
In the trip computer, you can call up the follow ­
ing displays one after the other by turning the
l eft th umbwhee l on the mu ltifunction steering
wheel.
- Date
o page 241
-Remaining range
- Plug- in hybrid drive*: Tachometer
o page 97,
Range o page 99, Energy flow display
o page 102
-Short-term memory 0
-Average consumpt ion
- Long-term memory
fl
-Engine oil temperature*
The short -term memory collects driving informa­
tion from the time the ignition is switched on un­
til it is switched off . If you continue driving with­
in two hours after switching the ignition off, the
new values are included when calculat ing the cur­
rent tr ip informat ion.
Unlike the short-term memory, the long-term
memory is not erased automat ica lly. You can se­
lect the time period for evaluat ing trip informa­
tion yourself .
Efficiency program ii
Applies to: vehicles with efficiency program
The efficiency program can help you to use less
fuel.
It evaluates driving information in reference
Cockpit overview
to fuel consumption and shows other equipment
influencing consumption. Economy tips provide
advice for efficient driving.
T he eff iciency program receives distance and con­
sumption data from the short -term memory. If
the data in the efficiency program is deleted, the
val ues in the short-term memory are a lso reset.
T he following additional displays may be availa­
ble in the eff ic iency p rogram , depending on vehi­
cle equipment :
-Other equipment : other equipm ent that is cur­
rently affecting fu el consumption is listed in
the efficiency program . The display shows up to
three other equipment items. The equipment
using the most power is listed first. If more
than three items using power are sw itched on,
the equipment that is currently using the most
power is displayed . A chart also shows you the
current total of all other consume rs .
- Economy tips : in certain s ituations, economy
tips appear automatically for a short time in
the efficiency program.
If you follow these
economy tips, you can reduce your vehicle's fuel
consumption. To turn an economy message off
immed iate ly after it appears, p ress any button
on the multifunction steer ing whee l.
(D Tips
The date, time of day and time and date for­
mat can be set in the Infotainment system
~ page 241.
Radio
Requirement: radio mode must be started
o page 217 and the radio/media tab must be
displayed.
.. Press either the i][]button o r the left contro l
button
o page 14, depending on vehicle equip­
ment.
Depending on vehicle equipment, the following
functions may be available in the driver informa ­
t ion system.
- Selecting the frequency band: select and con-
firm a frequency band.
..,_
19

Cockpit overview
-Selecting a station from the presets li st* : se ­
l ect :
Presets > the desired radio station.
-Selecting a station from the station list* : se­
l ect and co nfirm a radio station.
-Selecting a station from the favorites list : se­
lect :
Preset s> the desired radio station.
-Opening a media source : select an d co nfirm
Switch to media .
Additional settings
Applies to: vehicles with Aud i v irtual cockp it
-Se lect: rig ht contro l bu tton > desired entry .
Depending on the function selected, the follow­
i n g addit io nal settings may be poss ible:
-Show "Now Playing " screen : see c:!) page 221.
Media
Requir ement: a media dr ive m ust conta in a udio/
video fi les
¢ page 223 and the radio/media tab
m ust be displayed .
~ Press either the @lbutton or the left cont rol
button ¢ page 14, depend ing on ve hicle eq uip­
ment .
Depending on vehicle equipment, the following
f u nctions may be availab le in the d river in fo rma­
tion system.
-Selecting a media source : select and confi rm a
source such as the
"SO car d".
-Playing an audio/video file : selec t and conf irm
a track/file.
-Pau sing/resuming playback: p ress the r ight
th umbwheel @¢page 15, fig . 11. To resume
p layback, p ress the r ight thum bw heel again.
-Restarting playback of an audio file : select the
file that is currently playing, if necessary . Press
the left th umbwhee l.
Applies to: vehicles with analog instrument cluster
-Switching to radio: select and confirm a fre­
quen cy band (such as
FM ).
App lies to: vehicles with Aud i v irtual cockp it
-Switching to the radio : select and confirm
Switch to radio .
-Opening additional track information: select:
rig ht cont ro l button
> Show "Now Playing"
20
screen . Fo r additiona l informa tion, see
¢ page 233.
(D Tips
-Th e me dia dr ives d o no t pla y files that a re
protec te d by ORM and that are i dent ified
with the symbol
1'.D .
-Ple ase note th at within a medi a source in
t h e drive r informat io n system, only p lay lists
t h at were selected thro ugh the MMI control
p ane l can be
p layed <=> page 231 .
-Al wa ys pay attent io n to the I nfot ainme nt
system display. Addi tional ope ration
throug h the MMI control pane l may be nec­
essary, depending on the se lected function.
Telephone
Applies to: vehicles with telephone
Requireme nt: a cell phone must be connected to
t he M MI
<=> page 177 and the te lep hon e tab
mus t be displ ayed .
~ Press either the @lbutton or the left control
but ton
<=> p ag e l4, dep en ding on vehicle equip­
m ent .
Depend ing on veh icle equipment , the following
funct io ns may be ava ila ble in the dr ive r informa ­
t ion sys tem .
-Accessing a contact : select and con firm Call
list / Favorites / Directory .
Select and confirm
a contact.
-Directory contacts : the driver information sys­
tem only d isplays d irecto ry contacts that have a
phone number sto red. If s eve ral ph one num ­
bers a re stored wi th a con tact , the list of sto re d
numb ers is dis play ed first w he n the e ntry is se­
le cted. For more inform ation a bout the dis­
pl aye d sy mbols , refe r to
<=> page 185.
-Recent calls : the recen t ca lls list contains a ll in ­
c oming, outg oi ng and mis se d ca lls.
-Caller information *: the name, pho ne numb er
or Unknown ap pea rs in t he dr iver in form ation
syste m displ ay depe nding on whe ther the calle r
h as bee n sto red in t he di rec tory an d if th e
phone number has bee n transmitted.
Functions during an incoming call II>-

CXl CXl .... N ,.__
N .... 0 N > 00
-Accepting a call : press the left thumbwheel
when there is an incoming ca ll.
-D eclining a call: select and confirm Declin e
when there is an incoming call.
-Ending a phone call : select and confi rm End
call .
Funct ion s du ring a phon e ca ll
Applies to: ve hicles with analog instrument clus ter
-Making an addition al call : select Hold > ~
button > Directo ry or C all list > an entry in the
list.
- Ac cepting an incom ing call when there is an
act ive call and a call on hold :
select and con­
firm
Replace . The active call is replaced with
the incoming call.
Applies to: vehicles with Audi virtual cockpit
-Making an additional call : selec t: Hold call >
le ft control b utton > Director y or Call list > an
entry .
-Acc epting an inc oming call when there i s an
acti ve call and a call on hold :
select and con ­
firm
An sw er. The active call is replaced with the
incoming call.
Addit ional functions incl ude:
Mute : if you se lect and co nfirm this function , the
o ther pe rson on the phone cannot hear yo u. You
can hea r the other person.
Holding or r esumin g a call : you can put an ex ist­
i ng phone call o n hold and resume it .
S w ap call : you can alternate between two phone
calls at the same time . One of the calls w ill be on
hold.
End call ends the active phone call. A call
that was placed on hold stays on ho ld a nd can be
taken off hold with
Re sume .
Confe rence call :
a call on hold and up to five ac ­
tive parties (depending on the cell phone service p rovider) can be added to a conference ca ll. To
make an addit ional call, put all pa rti ci pants in
the curren t confe rence ca ll on ho ld using
Hold .
By pressing the left contro l button, yo u can make
additional calls from the directory or the call list.
Re sume takes all parties off ho ld .
Coc kpit o ve rv iew
{!) Tips
-The telephone functions can on ly be con­
trolled with the multif unction steering
wheel if the telephone equipment was in­
stalled
at the factory.
- The telephone functions depend on the cell phone and whether they are supported by
your cell phone service provider or not.
- The
Call waiting function must be act ivated
in your cell phone and in the MMI to be
alerted when there is an incoming call dur­
ing an act ive call. The call options depend
on the cell phone and se rvice provide r. You
can obta in mo re information from your cell
phone serv ice provider.
Navigation
Applies to: vehicles wi th naviga tion system
Requirement: the navigation tab must be dis­
played.
If you have not star ted rou te guidance, a com­
pass will disp lay in the drive r information sys ­
tem. The map is displayed in the Audi v irtual
cockpit *.
.,. Press eithe r the ~ button o r the left contro l
but ton
q page 14, depending on vehicle equip­
ment .
Depend ing on veh icle equ ipment, the followi ng
funct ions may be ava ilable i n the dr iver informa ­
t ion system.
-A ccessing last d estinations : select and confirm
Last destinations > the desired destination.
-Accessing favorites ": select and confirm F av or­
ite s>
the desired destination.
Applies to: vehicles with analog instru men t cluster
-Showing na vigation when route guidance is
a cti ve :
select and confirm Route gu idance .
-Showing compas s when route guidance is not
a ctive:
select and confirm Compass .
- Starting route guidance to the stored home
add re ss :
if necessary, first select and confirm
Stop route guidance and then Fav orite s >
Home a ddre ss .
- Canceling act ive route guidan ce :
se lect and
confirm
Stop route guidance .
21

Cockpit overview
App lies to: vehicles w ith Audi virtual cockpit
-Di splaying navigation during active route
guidance :
select and confirm Map* / Arrow
view *
-Starting route guidance to the stored home
addres s:
if necess ary, firs t selec t an d con firm
Can cel route guidance an d then Favorite s >
Home address.
-Canceling active route guidance : sele ct: r ight
contro l bu tton
> Cancel route guidance.
Additional settings
Applies to: vehicles with Audi virtual cockpit
-Se lect : rig ht contro l bu tto n > desired entry .
Depending on t he vehicle eq uipment and the
fu nction selected, the following add itional set­
tings may be possible:
- Map display Qpage 211
- Map colors ¢ page 211
-Map orientation ¢ pa ge 2 11
- Automatic zoom ¢ page 21 2
Navigation view with route guidance
started
Applies to: vehicles w ith navigation system and Audi virtual
cockpit
F ig. 16 D iagram: standard ma p w he n ro ute guida nce is ac ­
tive (Aud i v ir tu al cockp it)
Re qui rement: a destination must be ente red
¢
page 200, r ou te g uidance must be started a nd
the navigat ion tab mus t be d isp layed.
Depending on the veh icle equ ipment and these­
lected view ¢
page 15, th e follow ing i nformat io n
w ill be disp laye d in t he dr ive r informa tion sys­
tem :
CD Map conte nt (such as points of i nterest or
traffic info rmat io n)
@ Current vehicle position
(@)
22
@A bar g raph ap pea rs whe n there is an upcom­
i ng tu rn . The fewer bars are s hown, t he shorte r
the d istance is unt il the turn . If there is not an
u pcoming t urn, the distance to the destination/
stopover and the calcu lated arriva l t ime is dis­
played in t he right speedometer .
@ Name of the street w here you are c urrently
driv ing
Street view with route guidance started
Applies to : vehicles with navigat ion system and analog instru­
ment cluster
Fig. 17 Example: lane c han ge i n the instrument cluste r
Fig. 18 Example: turning m an euver in th e in st rume nt cl us·
ter
Requirement: a dest inat io n m ust be entered
¢ page 200, route guidance m ust be started and
the nav igation tab m ust be displayed .
Depend ing on veh icle equipment, the following
i nformat ion may be shown in the driver informa­
tion system .
CD Distance to the ne xt ma neuver
@ Distance to the destination o r stopover
@ Cal cula ted a rr iv al ti me
@ Name of the current expressway, highway o r
street. If the
O symbol is displayed in front IJI,

a, a, ..... N
" N .... 0 N > 00
of the street name, you should turn onto the
street shown .
® Direction arrow for the upcoming maneuver
@ La ne recommendat ion
(J) A bar graph appears when a direction arrow
is displayed. The fewer bars are shown, the
shorter the distance is until the turn .
The fo llowing functions are also available when
route guidance is active:
- Repeating the last navigation prompt: press
the~ button.
-Changing the voice guidance volume : turn the
right thumbwheel up or down during voice
guidance.
A WARNING
The route calc ulated by the navigation system
is a recommendation for reaching your desti­
nation. Obey traffic lights, stopping restric­
tions, one-way streets, lane change restr ic­
tions, etc.
{!) Tips
-Also refer to the chapter ¢ page 8, Controls
at a glance
- An exclamation point" !" in front of the
street name indicates that the informat ion
about this street or this section of the route
i s not complete in the navigation data con­
tained in the MMI. Obey traffic laws in one­
way streets and pedestrian zones.
On Board Diagnostic
System (OBD)
Malfunction indicator lamp (MIL)
The malfunction indicator lamp (MIL) ¢4 in the
in strument cluster is part of the On Board Diag­
n ostic System (080 II).
The indicator light turns on when the ign ition is
switched on and turns off once the engine is
started and is running in idle at a stab le speed.
This indicates that the MIL is functioning correct­
l y .
Cockpit overview
If the light does not turn off after starting the
engine
or turns on while driving, this may indi­
cate there is a malfunction in the engine.
If the
indicator turns on, the cata lytic converter may be
damaged .
Drive
with reduced engine performance (avoid
high speeds for extended periods of time and/or
fast acceleration) and have the malfunction cor­
rected . See an authorized Audi dealer or author­
ized Audi Service Facility.
The electronic speed limiter may be fau lty if the
indicator light turns on. For additional informa­
tion, see
Q page 23 .
The MIL may also turn on if the fuel filler cap is
not closed correctly
Q page 314.
On-Board Diagnostics
Fig. 19 Locat ion of Data Link Co nnector (D LC)
On-Boa rd Diagnostics monitors the components
of your emission control system . Each monitored
component in your engine system has been as­
signed a code. In case of a malfunction, the com­ ponent will be identified and the fault stored as a
code in the control module memory .
The MIL light may also illuminate if there is a
leak in the on-board fuel vapor recovery system.
If the light illuminates after a refuelling, stop
the vehicle and make sure the fuel filler cap is properly closed
¢ page 314.
In order to make an accurate diagnosis, the stor­
ed data can only be displayed using special diag­
nostic equipment (generic scan tool for 080) .
In order to connect the special diagnostic equip­
ment, push the plug into the Data Link
Connector .,.
23