2017 Acura NSX hood release

6 || 7
VISUAL INDEXVISUAL INDEX
Dashboard and Ceiling Controls
u v w x y z { |
u
Power Window Switches p. 59
Power Door Lock Master Switch p. 57
Door Mirror Controls p. 72
vMemory Buttons* /
SET Button* p. 71
wDriver’s Side Interior Fuse Box p. 171
xDriver’s Front Airbag p. 24
yDriver’s Knee Airbag p. 26
zElectric Parking Brake Switch p. 140
Automatic Brake Hold Button p. 141
{Rearview Mirror p. 72
|Passenger’s Front Airbag p. 24
*if equipped
u v w x y z {
uHatch Release Button p. 58
Fuel Fill Door Release Button p. 149
vHood Release Handle p. 181
wUSB Port p. 80
xAccessory Power Socket p. 81
yUSB Port p. 80
zGlove Box
{Passenger’s Side Interior Fuse Box p.
172

180 || 181
MAINTENANCEMAINTENANCE
every year.
*4:D riving in mountainous areas at very low vehicle speeds results in higher\
transmission temperature.
This requires transmission uid and clutch uid changes more frequ\
ently than recommended by the
*2: If you drive in dusty conditions, replace the air cleaner element every \
15,000 miles (24,000 km).
*3: If you drive primarily in urban areas that have high concentrations of s\
oot in the air from industry and
from diesel-powered vehicles, replace the dust and pollen lters ever\
y 15,000 miles (24,000 km) or
Maintenance Minder. If you regularly drive your vehicle under this condi\
tion, have the transmission
uid and clutch uid changed every 20,000 miles (32,000 km).
*5:D riving in mountainous areas at very low vehicle speeds results in higher\
level of mechanical (Shear)
CODE
1
Inspect tire condition
2
Maintenance Sub Items
stress to uid. This requires Twin Motor Unit uid changes more frequently than recommended by the
Maintenance Minder. If you regularly drive your vehicle under these cond\
itions, have the Twin Motor
Unit uid changed at 7,500 miles (12,000 km), then every 15,000 mil\
es (24,000 km).
3
Replace air cleaner element*2
Replace dust and pollen flters*3
4
Replace transmission fuid*4
Replace clutch fuid*4
Inspect Active Exhaust Valve function Replace spark plugs
Inspect valve clearance
5 Replace Intake Sound Control
6
Replace engine coolan
t
Replace Twin Motor Unit fuid*5
n Opening the Hood
Park the
vehicle on a level surface, and set the parking brake.
Pull the hood release handle under the lower left corner of
the dashboard.
Push the hood latch lever to release the lock mechanism, and
open the hood.
Lift the hood up most of the way. The hydraulic supports will
lift it up the rest of the way and hold it up.
When closing, lower it to approximately 12 inches (30 cm),
then press down firmly with your hands and ensure that both
left and right latches are locked in place.
Pull
Hood Release Handle
Lever

182 || 183
MAINTENANCEMAINTENANCE
Under the Hood
Brake Fluid
(Black Cap)
Washer Fluid
(Black Cap)
12-Volt Battery
Inverter Coolant
Filler Tank
n Opening the Hatch
Park the
vehicle on a level surface, and set the parking brake.
Press the hatch release handle on the driver’s door.
Lift the hatch up most of the way. The hydraulic supports will
lift it up the rest of the way and hold it up.
When closing, lower it to approximately 12 inches (30 cm),
then press down firmly with your hands.
Hatch Release Button
n Removing the Engine Compartment Cover
Pull up on the co
ver to pull it off the pins.
Engine
CoversCompartment