8-41
8
EBU33030Wheel installation1. Install the wheel and the nuts.TIPFor YXM70VPXG / YXM70VPHG: tapered
nuts are used for both the front and rear
wheels. Install the nuts with their tapered side
towards the wheel. YXM70VPXG / YXM70VPHG2. Lower the vehicle so that the wheel is on the ground. 3. Tighten the wheel nuts in a crisscross
pattern to the specified torque.
WARNING
EWB03400Do not reverse the rims on your Yamaha
Viking to widen the track width. Installing
wheels improperly increases the risk of
wheel failure and accidents. EBU32640BatteryThe battery is located under the hood. (See
page 8-10 for hood removal and installation
procedures.)
This model is equipped with a VRLA (Valve
Regulated Lead Acid) battery. There is no
need to check the electrolyte or to add dis-
1. Tapered nut
1
Tightening torques:Front wheel nut:75 Nm (7.5 m·kgf, 54 ft·lbf)
Rear wheel nut: 75 Nm (7.5 m·kgf, 54 ft·lbf)
UB427AE0.book Page 41 Monday, May 18, 2015 9:17 AM
10-1
10
EBU32750
SPECIFICATIONS
Dimensions:Overall length:3100 mm (122.0 in)
Overall width: 1570 mm (61.8 in) (YXM70VPHG, YXM70VPXG)
1625 mm (64.0 in) (YXM70VPSG)
Overall height: 1925 mm (75.8 in)
Wheelbase:
2135 mm (84.1 in)
Ground clearance: 300 mm (11.8 in)
Minimum turning radius: 4500 mm (177 in)Weight:Curb weight:649.0 kg (1431 lb) (YXM70VPHG, YXM70VPXG)
657.0 kg (1448 lb) (YXM70VPSG)Noise and vibration level:Noise level (77/311/EEC):83.0 dB(A) (YXM70VPHG_EUR/FRA/GBR,
YXM70VPSG_EUR/FRA/GBR,
YXM70VPXG_EUR/FRA/GBR)
Uncertainty of measurement: 3.0 dB(A) (YXM70VPHG_EUR/FRA/GBR,
YXM70VPSG_EUR/FRA/GBR,
YXM70VPXG_EUR/FRA/GBR) A-weighted sound power level:
93.0 dB(A) (YXM70VPHG_EUR/FRA/GBR,
YXM70VPSG_EUR/FRA/GBR,
YXM70VPXG_EUR/FRA/GBR)
Uncertainty of measurement: 3.0 dB(A) (YXM70VPHG_EUR/FRA/GBR,
YXM70VPSG_EUR/FRA/GBR,
YXM70VPXG_EUR/FRA/GBR)
Vibration on seat (EN1032, ISO5008): Will not exceed 0.5 m/s² (YXM70VPHG_EUR/FRA/GBR,
YXM70VPSG_EUR/FRA/GBR,
YXM70VPXG_EUR/FRA/GBR)
Uncertainty of measurement:
0.0 m/s² (YXM70VPHG_EUR/FRA/GBR,
YXM70VPSG_EUR/FRA/GBR,
YXM70VPXG_EUR/FRA/GBR)
Vibration on handle (EN1032, ISO5008): Will not exceed 2.5 m/s² (YXM70VPHG_EUR/FRA/GBR,
YXM70VPSG_EUR/FRA/GBR,
YXM70VPXG_EUR/FRA/GBR)
Uncertainty of measurement: 0.2 m/s² (YXM70VPHG_EUR/FRA/GBR,
YXM70VPSG_EUR/FRA/GBR,
YXM70VPXG_EUR/FRA/GBR)
Engine:Engine type:Liquid cooled 4-stroke, SOHC
Cylinder arrangement: Single cylinder
UB427AE0.book Page 1 Monday, May 18, 2015 9:17 AM
