2016 YAMAHA SR400 light

Table of contents
Safety information............................ 1-1
Description ........................................ 2-1
Left view .......................................... 2-1
Right view ........................................ 2-2
Controls and instruments ................ 2-3
Instrument and control functions ... 3-1
Main switch/steering lock ................ 3-1
Indicator lights and warning lights ... 3-2
Speedometer unit ..... ....................... 3-3
Tachometer ..................................... 3-4
Handlebar switches ......................... 3-4
Clutch lever ..................................... 3-6
Shift pedal ....................................... 3-6
Brake lever ...................................... 3-7
Brake pedal .............. ....................... 3-7
Fuel tank cap ................................... 3-8
Fuel ................................................. 3-9
Fuel tank breather/overflow hose ........................................... 3-10
Catalytic converter......................... 3-11
Fuel cock ....................................... 3-11
Kickstarter .... ............................. .... 3-12
Decompression lever..................... 3-12
Seat ............................................... 3-13
Adjusting the shock absorber assemblies ................................. 3-13
Sidestand ...................................... 3-14
Ignition circuit cut- off system ......... 3-15
For your safety – pre-operation
checks ................................................ 4-1
Operation and im portant riding
points ................................................. 5-1
Starting the engine .......................... 5-2
Starting trouble ................................ 5-3
Shifting ............................................ 5-3
Tips for reducing fuel consumption................................. 5-5
Engine break-in ............................... 5-5
Parking ............................................ 5-6 Periodic maintenance and
adjustment
........................................ 6-1
Owner’s tool kit ............................... 6-2
Periodic maintenance chart for the
emission control system .............. 6-3
General maintenance and lubrication chart ........................... 6-4
Removing and installing the panel ............................................ 6-7
Checking the spark plug ................. 6-8
Engine oil and oil filter element ....... 6-9
Replacing the air filter element ..... 6-13
Checking the engine idling
speed ......................................... 6-14
Checking the throttle grip free play ............................................ 6-14
Valve clearance ............................ 6-15
Tires .............................................. 6-15
Spoke wheels........... ..................... 6-17
Adjusting the clutch lever free play ............................................ 6-18
Adjusting the brake lever free play ............................................ 6-19
Adjusting the brake pedal height
and free play .............................. 6-20
Checking the shift pedal................ 6-21
Brake light switches ...................... 6-22
Checking the front brake pads and rear brake shoes ................ 6-22
Checking the brake fluid level ....... 6-23
Changing the brake fluid .............. 6-24
Drive chain slack ........................... 6-25
Cleaning and lubricating the drive
chain .......................................... 6-26
Checking and lubricating the cables ........................................ 6-27
Checking and lubricating the throttle grip and ca ble ................ 6-27
Checking and lubricating the
brake and clutch levers.............. 6-28
Checking and lubricating the brake pedal ................................ 6-28
Checking and lubricating the centerstand and sidestand ........ 6-29
Lubricating the swingarm pivots.... 6-29
Checking the front fork .................. 6-30
2RD-28199-E1.book 1 ページ ２０１５年９月３日　木曜日　午後３時４２分

Table of contents
Checking the steering ....................6-30
Checking the wheel bearings ........6-31
Battery ...........................................6-31
Replacing the fuses .......................6-33
Replacing the headlight bulb .........6-35
Replacing the auxiliary light bulb ...........................................6-36
Replacing the tail/brake light bulb ............................................6-37
Replacing a turn signal light
bulb ............................................6-38
Front wheel .............. ......................6-39
Rear wheel ............................ ........6-40
Troubleshooting .......... ...................6-42
Troubleshooting chart . ...................6-43
Motorcycle care and storage ...........7-1
Matte color caution ..........................7-1
Care .................................................7-1
Storage ............................................7-4
Specifications ....................................8-1
Consumer information .....................9-1
Identification numbers .....................9-1
Index .................................................10-1
2RD-28199-E1.book 2 ページ ２０１５年９月３日　木曜日　午後３時４２分

Safety information
1-4
1
2
3
4
5
6
7
8
9
10
11
12
13
14 Many companies with no connection to
Yamaha manufacture parts and acces-
sories or offer other modifications for
Yamaha vehicles. Yamaha is not in a
position to test the products that these
aftermarket companies produce.
Therefore, Yamaha can neither en-
dorse nor recommend the use of ac-
cessories not sold by Yamaha or
modifications not specifically recom-
mended by Yamaha, even if sold and
installed by a Yamaha dealer.
Aftermarket Parts, Accessories,
and Modifications
While you may find aftermarket prod-
ucts similar in design and quality to
genuine Yamaha accessories, recog-
nize that some aftermarket accessories
or modifications are not suitable be-
cause of potential safety hazards to you
or others. Installing aftermarket prod-
ucts or having other modifications per-
formed to your vehicle that change any
of the vehicle’s design or operation
characteristics can put you and others
at greater risk of serious injury or death.
You are responsible for injuries related
to changes in the vehicle.
Keep the following guidelines in mind,
as well as those provided under “Load-
ing” when mounting accessories.
Never install accessories or carry
cargo that would impair the perfor-
mance of your motorcycle. Care-
fully inspect the accessory before
using it to make sure that it does
not in any way reduce ground
clearance or cornering clearance,
limit suspension travel, steering
travel or control operation, or ob-
scure lights or reflectors. Accessories fitted to the handle-
bar or the front fork area can cre-
ate instability due to improper
weight distribution or aerody-
namic changes. If accessories
are added to the handlebar or
front fork area, they must be as
lightweight as possible and
should be kept to a minimum.
Bulky or large accessories may seriously affect the stability of
the motorcycle due to aerody-
namic effects. Wind may at-
tempt to lift the motorcycle, or
the motorcycle may become un-
stable in cross winds. These ac-
cessories may also cause
instability when passing or being
passed by large vehicles.
Certain accessories can dis- place the operator from his or
her normal riding position. This
improper position limits the free-
dom of movement of the opera-
tor and may limit control ability,
therefore, such accessories are
not recommended.
Use caution when adding electrical
accessories. If electrical accesso-
ries exceed the capacity of the mo-
torcycle’s electrical system, an
electric failure could result, which
could cause a dangerous loss of
lights or engine power.
Aftermarket Tires and Rims
The tires and rims that came with your
motorcycle were designed to match the
performance capabilities and to provide
the best combination of handling, brak-
ing, and comfort. Other tires, rims, siz-
es, and combinations may not be
2RD-28199-E1.book 4 ページ ２０１５年９月３日　木曜日　午後３時４２分

Description
2-2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
EAU63391
Right view
1. Air filter element (page 6-13)
2. Kickstarter (page 3-12)
3. Kick indicator (page 5-2)
4. Headlight (page 6-35)
5. Brake pedal (page 3-7)
6. Owner’s tool kit (page 6-2)
7. Shock absorber assembly spri ng preload adjusting ring (page 3-13)
12
4
563
7
2RD-28199-E1.book 2 ページ ２０１５年９月３日　木曜日　午後３時４２分

3-1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Instrument and control functions
EAU10462
Main switch/steering lock
The main switch/steering lock controls
the ignition and lighting systems, and is
used to lock the steering. The various
positions are described below.
EAU45111ON
All electrical circuits are supplied with
power, and the meter lighting and tail-
light come on, and the engine can be
started. The key cannot be removed.
TIP
The headlight comes on automatically
when the engine is started and stays on
until the key is turned to “OFF”, even if
the engine stalls.
EAU10662OFF
All electrical systems are off. The key
can be removed.
WARNING
EWA10062
Never turn the key to “OFF” or
“LOCK” while the vehicle is moving.
Otherwise the electrical systems will
be switched off, which may result in
loss of control or an accident.
EAU10687LOCK
The steering is locked and all electrical
systems are off. The key can be re-
moved.
To lock the steering
1. Turn the handlebars all the way to the left.
2. With the key in the “OFF” position, push the key in and turn it to
“LOCK”.
3. Remove the key.
TIP
If the steering will not lock, try turning
the handlebars back to the right slightly.
To unlock the steering
P
ON
OFF
LOCK
1. Push.
2. Turn.
1. Push.
2. Turn.
12
12
2RD-28199-E1.book 1 ページ ２０１５年９月３日　木曜日　午後３時４２分

Instrument and control functions
3-2
1
2
3
4
5
6
7
8
9
10
11
12
13
14 1. Insert the key.
2. With the key in the “LOCK” posi-
tion, push the key in and turn it to
“OFF”.
EAU59680 (Parking)
The hazard lights and turn signal lights
can be turned on, but all other electrical
systems are off. The key can be re-
moved.
The steering must be locked before the
key can be turned to “ ”.
NOTICE
ECA20760
Using the hazard or turn signal
lights for an extended length of time
may cause the battery to discharge.
EAU49398
Indicator light s and warning
lights
EAU11022Turn signal indicator light “ ”
This indicator light flashes when a turn
signal light is flashing.
EAU11061Neutral indicator light “ ”
This indicator light comes on when the
transmission is in the neutral position.
EAU11081High beam indicator light “ ”
This indicator light comes on when the
high beam of the headlight is switched
on.
EAU11354Fuel level warning light “ ”
This warning light comes on when the
fuel level drops below approximately
2.2 L (0.58 US gal, 0.48 Imp.gal). When
this occurs, refuel as soon as possible.
The electrical circuit of the warning light
can be checked by turning the key to
“ON”. The warning light should come
on for a few seconds, and then go off.
1. Engine trouble warning light “ ”
2. Fuel level warning light “ ”
3. Neutral indicator light “ ”
4. High beam indicator light “ ”
5. Turn signal indicator light “ ”
4
2
153
2RD-28199-E1.book 2 ページ ２０１５年９月３日　木曜日　午後３時４２分

Instrument and control functions
3-3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
If the warning light does not come on
initially when the key is turned to “ON”,
or if the warning light remains on, have
a Yamaha dealer check the electrical
circuit.
EAU11486Engine trouble warning light “ ”
This warning light comes on if a prob-
lem is detected in the electrical circuit
monitoring the engine. If this occurs,
have a Yamaha dealer check the vehi-
cle.
The electrical circuit of the warning light
can be checked by turning the key to
“ON”. The warning light should come
on for a few seconds, and then go off.
If the warning light does not come on
initially when the key is turned to “ON”,
or if the warning light remains on, have
a Yamaha dealer check the electrical
circuit.
EAU11631
Speedometer unit
The speedometer unit is equipped with
a speedometer, an odometer and a
tripmeter. The speedometer shows rid-
ing speed. The odometer shows the to-
tal distance traveled. The tripmeter
shows the distance traveled since it
was last set to zero with the reset knob.
The tripmeter can be used to estimate
the distance that can be traveled with a
full tank of fuel. This information will en-
able you to plan future fuel stops.
1. Reset knob
2. Speedometer
3. Odometer
4. Tripmeter
123 4
2RD-28199-E1.book 3 ページ ２０１５年９月３日　木曜日　午後３時４２分

Instrument and control functions
3-5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
EAU12352Pass switch “ ”
Press this switch to flash the headlight.
TIP
When the dimmer switch is set to “ ”,
the passing switch has no effect.
EAU12401Dimmer switch “ / ”
Set this switch to “ ” for the high
beam and to “ ” for the low beam.
EAU12461Turn signal switch “ / ”
To signal a right-hand turn, push this
switch to “ ”. To signal a left-hand
turn, push this switch to “ ”. When re-
leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
EAU12501Horn switch “ ”
Press this switch to sound the horn.
EAU12661Engine stop switch “ / ”
Set this switch to “ ” before starting
the engine. Set this switch to “ ” to
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
EAU12735Hazard switch “ ”
With the key in the “ON” or “ ” posi-
tion, use this switch to turn on the haz-
ard lights (simultaneous flashing of all
turn signal lights).
The hazard lights are used in case of
an emergency or to warn other drivers
when your vehicle is stopped where it
might be a traffic hazard.
NOTICE
ECA10062
Do not use the hazard lights for an
extended length of time with the en-
gine not running, otherwise the bat-
tery may discharge.
2RD-28199-E1.book 5 ページ ２０１５年９月３日　木曜日　午後３時４２分