2016 VAUXHALL MOVANO_B remote control

Climate control111Open the cover using a coin and
replace the battery (CR 2430 or
equivalent), ensuring the new battery
is correctly installed with the positive
( < ) side facing the positive terminals.
Replace the cover securely.
Dispose of old batteries in
accordance with environmental
regulations.
Batteries do not belong in household
waste. They must be disposed of at
an appropriate recycling collection
point.
Remote control fault displays
cobA:poor signal –
adjust positionconP:no signal – move closerbALo:battery low –
change batteryErr:system error –
consult workshopAdd,
AddE:system in learning mode
Teach remote control
If the vehicle battery is reconnected,
the LED in the instrument panel
button illuminates and the system
configures the remote control menu
automatically. If the LED flashes,
press OK on remote control, select
Add or AddE and confirm.
Additional remote control units may
also be configured. Press the button
until LED flashes, switch on the
remote control, select Add and
confirm.
AddE teaches the current remote
control unit exclusively and blocks all
previously configured units. Add
teaches up to 4 remote control units,
but only one unit can operate the
system at any one time.
Operation
Heating Y
Select Y in the menu bar and confirm.
The predetermined heating duration,
e.g. L 30, flashes in the display. The
factory setting is 30 minutes.
To temporarily adjust the heating
duration, adjust with q or r and
confirm. The value can be set from 10 to 120 minutes. Due to the power
consumption, note the heating
duration.
To switch off, select Y in the menu bar
again and confirm.
Ventilation x
Select x in the menu bar and confirm.
The ventilation duration can be
accepted or adjusted. The duration
shown is accepted without
confirmation.
To switch off, select x in the menu bar
again and confirm.
Programming P
Up to 3 preset departure times can be programmed, either during one day or
over one week.

112Climate control● Select P in the menu bar and
confirm.
● Select desired preset memory number 1, 2 or 3 and confirm.
● Select day and confirm.
● Select hour and confirm.
● Select minutes and confirm.
● Select Y or x and confirm.
● If necessary, adjust the runtime duration prior to departure and
confirm.
The next preset memory number to
be activated is underlined and the
weekday is displayed. Repeat the
procedure to programme the other
preset memory numbers.
Pressing X during the procedure will
exit without storing programme
adjustments.
To delete a preset departure time,
follow the steps for programming until
heating symbol Y flashes. Press q
or r until oFF appears in the display
and confirm.
Heating stops automatically
5 minutes after the programmed departure time.Notice
The remote control system features
a temperature sensor which
calculates the runtime according to
the ambient temperature and the desired heating level (ECO or
HIGH). The system starts
automatically between 5 and
60 minutes prior to the programmed
departure time.
Set weekday, time and heating
duration Ö
If the vehicle battery is disconnected or its voltage is too low, the unit will
need to be reset.
● Select Ö and confirm.
● Select weekday and confirm.
● Change hours and confirm.
● Change minutes and confirm. ● Change the default heating duration and confirm.
Heating level Y
The preferred heating level for
programmed departure times can be set to either ECO or HIGH.Select Y and confirm. ECO or HIGH
flashes in the display. Adjust using
q or r and confirm.

Driving and operating123Remote control
When increased ground clearance orimproved vehicle access is required,the suspension can be raised or
lowered using the remote control.
Caution
Ensure there is adequate
clearance and that there are no
obstructions when adjusting the
suspension height.
The remote control unit is magnetic
and may be fixed to any metal part of the vehicle or stored in its holder.
With the engine running, press theappropriate button for 2 seconds to
adjust the suspension height.
Indicator light will flash intermittently
while height adjustment is in progress
and illuminates when complete.
If the ignition is switched on with
engine not running, the suspension
height can only be lowered.
Notice
Handle with care, protect from
moisture and high temperatures and
avoid unnecessary operation.
Pre-programmed settings
Adjusts the suspension height to one
of three pre-programmed positions.l:lowered positionk:normal positionj:raised positionCaution
If an obstacle is detected while
raising or lowering, the
suspension height is returned to the normal position after a delay.
This does not guarantee damage-
free operation. Ensuring sufficient
clearance and freedom from
obstacles is the responsibility of the driver.
Manual settings
Manual adjustment can only be
performed when the vehicle is
stationary.
Select by pressing h for 2 seconds,
then R to raise, or S to lower.
To exit, press any of the pre-
programmed buttons.
Notice
Obstacle detection is not available
during manual adjustment.
When a certain low speed is
exceeded or when the ignition is
switched off, height adjustment is deactivated automatically and the
suspension height is returned to the
normal position.
Service mode
When the vehicle is stationary, press
i for 5 seconds to put the vehicle into
service mode. The indicator light will
illuminate.

222Customer information● Vehicle reactions in particulardriving situations (e.g. inflation of
an airbag, activation of the
stability regulation system).
● Environmental conditions (e.g. temperature).
These data are exclusively technical and help identifying and correcting
errors as well as optimizing vehicle
functions.
Motion profiles indicating travelled
routes cannot be created with these
data.
If services are used (e.g. repair
works, service processes, warranty cases, quality assurance),
employees of the service network
(manufacturer included) are able to
read out this technical information
from the event and error data storage
modules applying special diagnostic
devices. If required, you will receive
further information at these
workshops. After an error has been
corrected, the data are deleted from
the error storage module or they are
constantly overwritten.When using the vehicle, situations
may occur in which these technical
data related to other information
(accident report, damages on the
vehicle, witness statements etc.) may be associated with a specific person -possibly, with the assistance of an
expert.
Additional functions contractually
agreed upon with the client (e.g.
vehicle location in emergency cases)
allow the transmission of particular
vehicle data from the vehicle.
Radio Frequency
Identification (RFID)
RFID technology is used in some
vehicles for functions such as tyre
pressure monitoring and ignition
system security. It is also used in
connection with conveniences such
as radio remote controls for door
locking/unlocking and starting, and in-
vehicle transmitters for garage door
openers. RFID technology in
Vauxhall vehicles does not use or
record personal information or link
with any other Vauxhall system
containing personal information.

227NNew vehicle running-in ..............117
Number plate light .....................168
O
Object detection systems ...........142
Octane rating .............................. 201
Odometer ..................................... 78
Oil ............................................... 156
Oil, engine .......................... 196, 200
Oil level ......................................... 80
Oil pressure .................................. 87
Outside temperature ....................75
Overcab storage ..........................67
Overhead console .......................66
Overrun cut-off ........................... 119
P
Parking ................................ 17, 121
Parking assist ............................ 142
Parking brake ............................ 135
Parking ticket holder .....................37
Particulate filter ........................... 124
Performing work ........................155
Pollen filter ................................. 114
Power door locks ..........................24
Power outlets ............................... 76
Power side step ............................ 26
Power sliding door ........................26
Power steering fluid ....................158
Power take-off ............................ 152Power windows ............................ 35
Preheating ........................... 87, 118
Puncture ............................. 180, 184
R Radio Frequency Identification (RFID) ..................................... 222
Radio remote control ...................20
Rain sensor .................................. 74
Reading lights ............................ 100
Rear air conditioning system .....108
Rear bench seat storage ..............66
Rear courtesy light........................ 99
Rear doors ................................... 29
Rear fog light ............................... 89
Rear fog lights ........................ 95, 99
Rear heating system .................. 107
Rear reading light .......................100
Rear seats .................................... 44
Rear storage ................................. 67
Rear view camera ...................... 144
Rear windows .............................. 36
Recommended fluids and lubricants ........................ 196, 200
Refuelling ................................... 148
Remote control ............................. 20
Retractable parking brake ..........135
Reversing lights ........................... 99
Ride control systems ..................136
Ride height ................................. 122Roof.............................................. 37
Roof load ...................................... 71
Roof rack ..................................... 70
S
Safety belts ................................... 46
Safety net .................................... 69
Seat adjustment ....................... 7, 40
Seat belt ........................................ 8
Seat belt reminder .......................84
Seat belts ..................................... 46 Seat heating ................................. 44
Seat position ................................ 39
Selective catalytic reduction .......125
Selector lever ............................. 131
Service ............................... 114, 195
Service display ......................80, 85
Service information ....................195
Service vehicle soon .................... 85
Side airbag system ......................53
Sidelights ...................................... 95
Side turn signal lights ................167
Side windows................................ 36
Sliding door .................................. 26
Spare wheel ............................... 185
Speed limiter......................... 77, 142
Speedometer ............................... 77
Starting and operating ................117
Starting off ................................... 16
Starting the engine .......16, 118, 131