2016 VAUXHALL ASTRA J torque

166Driving and operatingAutomatic Starter Control
This function controls the engine
starting procedure. The driver does
not need to hold the key in position 3.
Once applied, the system will go on
starting automatically until the engine
is running. Because of the checking
procedure, the engine starts running
after a short delay.
Possible reasons for a non-starting
engine:
● Clutch pedal not operated (manual transmission).
● Brake pedal not operated or selector lever not in P or N
(automatic transmission).
● Timeout occurred.
Turbo engine warm-up
Upon start-up, engine available
torque may be limited for a short time, especially when the engine
temperature is cold. The limitation is
to allow the lubrication system to fully
protect the engine.Overrun cut-off
The fuel supply is automatically cut-
off during overrun, i.e. when the
vehicle is driven with a gear engaged
but accelerator is released.
Stop-start system
The stop-start system helps to save
fuel and to reduce the exhaust
emissions. When conditions allow, it
switches off the engine as soon as the
vehicle is at a low speed or at a
standstill, e.g. at a traffic light or in a
traffic jam. It starts the engine
automatically as soon as the clutch is depressed. A battery sensor ensures
that an Autostop is only performed if the vehicle battery is sufficiently
charged for a restart.
Activation
The stop-start system is available as
soon as the engine is started, the
vehicle starts-off and the conditions
as stated below in this section are
fulfilled.Deactivation
Deactivate the stop-start system
manually by pressing eco.
Deactivation is indicated when the
LED in the button extinguishes.
Autostop If the vehicle is at a low speed or at a
standstill, activate an Autostop as
follows:
● Depress the clutch pedal.
● Set the lever in neutral.
● Release the clutch pedal.
The engine will be switched off while
the ignition stays on.

Vehicle care273handle until wheel is clear of the
ground.
Sports Tourer, jack variant 2
3 259:
Set the jack to the necessary
height. Position it directly below
the jacking point in a manner that
prevents it from slipping.
Attach wheel wrench and with the
jack correctly aligned rotate wheel wrench until wheel is clear of the
ground.
5. Unscrew the wheel nuts. 6. Change the wheel. Spare wheel 3 274.
7. Screw on the wheel nuts.
8. Lower the vehicle and remove jack.
9. Install the wheel wrench ensuring that it locates securely and tighten
each nut in a crosswise
sequence. Tightening torque is
140 Nm.
10. Align the valve hole in the wheel cover with the tyre valve before
installing.
Install wheel nut caps.
Install centre cap on alloy wheels.
11. Install vehicle jacking point cover on versions with sill panelling.
12. Stow the replaced wheel 3 274,
the vehicle tools 3 259 and the
adapter for the locking wheel nuts
3 59.
13. Check the tyre pressure of the installed tyre and the wheel nut
torque as soon as possible.
Have the defective tyre renewed or
repaired as soon as possible.

Technical data293Engine dataSales designation1.41.41.41.61.61.61.6
Engine identifier code
A14XER,
B14XERB14NELB14NET LPG,
B14NETB16XERA16XHTB16SHLB16SHTNumber of cylinders4444444Piston displacement [cm 3
]1398136413641598159815981598Engine power [kW]748810385125125147at rpm60004200-60004900-6000600060004750-60005500Torque [Nm]130200200155260260280at rpm40001850-42001850-490040001650-32001650-45001650-5000Fuel typePetrolPetrolPetrol/LPGPetrolPetrolPetrolPetrolOctane rating RONrecommended95959595989898possible98989898959595possible91919191919191Gas––LPG––––Engine oil consumption [l/1000 km]
2)0.60.60.60.60.60.60.62) Maximum value.

294Technical dataSales designation1.82.0 VXR1.31.61.61.71.7Engine identifier codeA18XERB20NFTA13DTEB16DTHB16DTLA17DTNA17DTCNumber of cylinders4444444Piston displacement [cm3
]1796199812481598159816861686Engine power [kW]10320670100817481at rpm6300530040003500-4000350040004000Torque [Nm]175400190320300260280at rpm38002400-48001750-325020001750-20001750-25001750-2500Fuel typePetrolPetrolDieselDieselDieselDieselDieselOctane rating RONrecommended9598possible9895possible9191Engine oil consumption [l/1000 km] 2)0.60.60.60.60.60.60.62)
Maximum value.

Technical data295Sales designation1.72.0 Turbo2.0 Turbo2.0 Turbo
Engine identifier code
A17DTSA20DTH
121 kWA20DTH
96 kWA20DTRNumber of cylinders4444Piston displacement [cm 3
]1686195619561956Engine power [kW]96121/117 3)96143at rpm4000400040004000Torque [Nm]300350300400at rpm2000-25001750-25001750-25001750-2500Fuel typeDieselDieselDieselDieselEngine oil consumption [l/1000 km] 2)0.60.60.60.62)
Maximum value.
3) Detuned version.