Page 450 of 664

450
4-3. Do-it-yourself maintenance
VERSO_EE_OM64590E
■ Engine oil consumption
A certain amount of engine oil will be consumed while driving. In the follow-
ing situations, oil consumption may increase, and engine oil may need to be
refilled in between oil maintenance intervals.
● When the engine is new, for example directly after purchasing the vehicle
or after replacing the engine
● If low quality oil or oil of an inappropriate viscosity is used
● When driving at high engine speeds or with a heavy load, when towing,
or when driving while accelerating or decelerating frequently
● When leaving the engine idling for a long time, or when driving frequently
through heavy traffic
The oil maintenance interval is variable and depending on the vehicle usage
condition.
■ After changing the engine oil (diesel engine only)
The engine oil maintenance should be reset. Perform the following proce-
dures:
Turn the engine switch to the “ON” position (vehicles without smart
entry & start system) or the “ENGINE START STOP” switch to
IGNITION ON mode (vehicles with smart entry & start system) and
then switch the display to the trip meter A. ( P. 224)
Turn the engine switch to the “LOCK” position (vehicles without
smart entry & start system) or “ENGINE START STOP” switch off
(vehicles with smart entry & start system).
Continue to press and hold the button until the meter displays
“00000”, and then the system reset will be completed.
While pressing the display change button
( P. 224), turn the engine switch to the
“ON” position (vehicles without smart
entry & start system) or the “ENGINE
START STOP” switch to IGNITION ON
mode (vehicles with smart entry & start
system) and the message shown in the
illustration will appear on the display.
Page 463 of 664

463
4-3. Do-it-yourself maintenance
4
Maintenance and care
VERSO_EE_OM64590E
Initializing the tire pressure warning system (if equipped)
■ The tire pressure warning system must be initialized in the fol-
lowing circumstances:
● When rotating front and rear tires which have different tire infla-
tion pressures
● When the tire inflation pressure is changed such as when
changing traveling speed
● When changing the tire size
When the tire pressure warning system is initialized, the current
tire inflation pressure is set as the benchmark pressure.
■ How to initialize the tire pressure warning system (if
equipped)
Park the vehicle in a safe place and turn the engine switch to
the “LOCK” position (vehicles without smart entry & start sys-
tem) or the “ENGINE START STOP” switch off (vehicles with
smart entry & start system).
Initialization cannot be performed while the vehicle is moving.
Adjust the tire inflation pressure to the specified cold tire infla-
tion pressure level. ( P. 633)
Make sure to adjust the tire pressure to the specified cold tire infla-
tion pressure level. The tire pressure warning system will operate
based on this pressure level.
Turn the engine switch to the “ON” position (vehicles without
smart entry & start system) or the “ENGINE START STOP”
switch to IGNITION ON mode (vehicles with smart entry &
start system).
Page 464 of 664
464
4-3. Do-it-yourself maintenance
VERSO_EE_OM64590E
Press and hold the tire pressure
warning reset switch until the tire
pressure warning light blinks
slowly 3 times.
Vehicles without smart entry & start system: Wait for a few
minutes with the engine switch in the “ON” position and then
turn the engine switch to the “ACC” or “LOCK” position.
Vehicles with smart entry & start system: Wait for a few min-
utes with the “ENGINE START STOP” switch in IGNITION ON
mode and then turn the “ENGINE START STOP” switch off.
Page 531 of 664
5
531
5-1. Essential information
When trouble arises
VERSO_EE_OM64590E
Securely attach cables or chains to the towing eyelet.
Take care not to damage the vehicle body.
Vehicles without smart entry & start system: Enter the vehicle
being towed and start the engine.
If the engine does not start, turn the engine switch to the “ON” posi-
tion.
Vehicles with smart entry & start system: Enter the vehicle
being towed and start the engine.
If the engine does not start, turn the “ENGINE START STOP” switch
to IGNITION ON mode.
Shift the shift lever to “N” and release the parking brake.
Vehicles with a Multidrive: When the shift lever cannot be
shifted. P. 597)
■While towing
If the engine is not running, the power assist for the brakes and steering will
not function, making steering and braking more difficult.
■ Wheel nut wrench
Wheel nut wrench is installed in luggage compartment. ( P. 560, 578)
Page 604 of 664

604
5-2. Steps to take in an emergency
VERSO_EE_OM64590E
■ Starting the engine when the battery is discharged (vehicles with a
Multidrive)
The engine cannot be started by push-starting.
■ To prevent battery discharge
● Turn off the headlights and the audio system while the engine is stopped.
● Turn off any unnecessary electrical components when the vehicle is run-
ning at a low speed for an extended period, such as in heavy traffic, etc.
Start the engine of the second vehicle. Increase the engine
speed slightly and maintain at that level for approximately 5
minutes to recharge the battery of your vehicle.
Vehicles with smart entry & start system: Open and close
any of the doors with the “ENGINE START STOP” switch
off.
Vehicles without smart entry & start system: Maintain the
engine speed of the second vehicle and turn the engine
switch to the “ON” position, then start the vehicle’s engine.
Vehicles with smart entry & start system: Maintain the
engine speed of the second vehicle and turn the “ENGINE
START STOP” switch to IGNITION ON mode, then start the
vehicle’s engine.
Once the vehicle’s engine has started, remove the jumper
cables in the exact reverse order in which they were con-
nected.
Once the engine starts, have the vehicle checked at any autho-
rized Toyota dealer or repairer, or another duly qualified and
equipped professional, as soon as possible.
Page 629 of 664
629
6-1. Specifications
6
Vehicle specifications
VERSO_EE_OM64590E
Ignition system (gasoline engine only)
Electrical system
Batteries with vent plugs
Batteries without vent plugs
Spark plug
Make DENSO SC20HR11 or SC16HR11
Gap 1.1 mm (0.043 in.)
NOTICE
■ Iridium-tipped spark plugs
Use only iridium-tipped spark plugs. Do not adjust the spark plug gap.
Battery
Specific gravity reading at
20C (68 F):
1.250 1.290 Fully charged
1.160 1.200 Half charged
1.060 1.100 Discharged
Charging rates
Quick charge
Slow charge
15 A max.
5 A max.
Battery
Open voltage at 20C (68 F): 12.6 12.8 V Fully charged
12.2 12.4 V Half charged
11 . 8 12.0 V Discharged
(Voltage is checked 20 minutes after
the engine and all the lights are
turned off.)
Charging rates 5 A max.
Page 650 of 664

650
Alphabetical index
VERSO_EE_OM64590E
Electronic key
If your electronic does not
operate properly ................. 600
Electronic power steering ....... 311
Emergency flashers
Switch ................................... 526
Emergency tire puncture
repair kit ................................. 577
Emergency, in case of
If the electronic key does not
operate properly ................. 600
If the engine will not start ...... 594
If the shift lever cannot be
shifted from “P” ................... 597
If the vehicle has discharged
battery................................. 603
If the warning buzzer
sounds ................................ 536
If the warning light
turns on............................... 536
If the warning message is
displayed ............................ 545
If you cannot operate back
door opener ........................ 599
If you have a flat tire ..... 560, 577
If you lose your keys ............. 598
If you think something is
wrong .................................. 534
If your vehicle becomes
stuck ................................... 611
If your vehicle has to be
stopped in an emergency ... 613
If your vehicle needs to be
towed .................................. 527
If your vehicle overheats ....... 607
Engine
Accessory mode ................... 204
Compartment ........................ 444
Engine switch................ 198, 202
Hood ..................................... 440
How to start the
engine......................... 198, 202
Identification number ............ 618
If the engine will not start ...... 594
Ignition switch ............... 198, 202
Overheating .......................... 607
Engine compartment cover .... 446
Engine coolant
Capacity ................................ 628
Checking ............................... 452
Preparing and checking
before winter....................... 320
Engine coolant temperature
indicator (Blue) ...................... 229
Engine coolant temperature
warning light (Red)................ 536
Engine immobilizer system .... 124
Engine oil
Capacity ................................ 622
Checking ............................... 447
Preparing and checking
before winter....................... 320
Engine oil maintenance
data ......................................... 450
Engine switch .................. 198, 202
EPS ........................................... 311
E
Page 652 of 664

652
Alphabetical index
VERSO_EE_OM64590E
Identification
Engine ................................... 619
Vehicle .................................. 618
Ignition
Engine switch ................ 198, 202
Ignition switch ............... 198, 202
Keys ........................................ 38
Ignition switch.................. 198, 202
Illuminated entry system......... 391
Immobilizer system ................. 124
Indicator lights ......................... 227
Initialization
Items to initialize ................... 644
Tire pressure warning
system ................................ 463
Inside rear view mirror ............ 105
Instrument cluster light
control .................................... 224
Intercooler ................................ 454
Interior lights
Interior lights ................. 389, 390
Switch ........................... 389, 390
Wattage................................. 636
Intrusion sensor....................... 139
Jack
Positioning a floor jack .......... 442
Replacing the wheel ............. 560
Vehicle-equipped
jack ............................. 560, 577
Jack handle ...................... 560, 577
Keyless entry ....................... 42, 64
Keys
Electronic key ......................... 38
Engine switch................ 198, 202
If the electronic key does not
operate properly ................. 600
If you lose your keys ............. 598
Ignition switch ............... 198, 202
Key number plate.................... 38
Keyless entry .................... 42, 64
Keys ........................................ 38
Mechanical key ....................... 38
Wireless remote control key ... 64
Knee airbag .............................. 148
IJ
K