2016 TOYOTA VENZA stop start

4774-2. Maintenance
4
Maintenance and care
VENZA_OM_OM73030U_(U) ■ Resetting the maintenance required reminder light (U.S.A. only)
After the required maintenance is preformed according to the maintenance
schedule, please reset the reminder light.
To reset the reminder light, follow the procedures described below:
Switch the display to the trip meter A when the engine is running.
(  P. 189)
Vehicles with smart key system:
Turn the “ENGINE START STOP” switch off.
Vehicles without smart key system:
Turn the engine switch to the “LOCK” position.
Vehicles with smart key system:
While pressing the trip meter reset button, set the “ENGINE START
STOP” switch to IGNITION ON mode (but do not start the engine
because otherwise the reset mode will be canceled). Continue to
press and hold the trip meter reset button until the trip meter dis-
plays “000000”.
Vehicles without smart key system:
While pressing the trip meter reset button, set the engine switch to
“ON” position (but do not start the engine because otherwise the
reset mode will be canceled). Continue to press and hold the trip
meter reset button until the trip meter displays “000000”.
■ Allow inspection and repairs to be performed by a Toyota dealer
● Toyota technicians are well-trained specialists and are kept up to date
with the latest service information. They are well informed about the
operations of all systems on your vehicle.
● Keep a copy of the repair order. It proves that the maintenance that has
been performed is under warranty coverage. If any problem should arise
while your vehicle is under warranty, your Toyota dealer will promptly
take care of it. STEP 1
STEP 2
STEP 3

4864-3. Do-it-yourself maintenance
VENZA_OM_OM73030U_(U) CAUTION■ When working near the electric cooling fan or radiator grille
Vehicles with smart key system
Be sure the “ENGINE START STOP” switch is off. With the “ENGINE
START STOP” switch in IGNITION ON mode, the electric cooling fan may
automatically start to run if the air conditioning is on and/or if the coolant
temperature is high. (  P. 499)
Vehicles without smart key system
Be sure the engine switch is in the “LOCK” position. With the engine
switch in the “ON” position, the electric cooling fan may automatically
start to run if the air conditioning is on and/or if the coolant temperature is
high. (  P. 499)
■ When working on or under the vehicle
Do not get under the vehicle with just the jack supporting it.
Always use automotive jack stands or other solid supports.
■ Safety glasses
Wear safety glasses to prevent flying or falling material, fluid spray, etc. from
getting in your eyes.
NOTICE■ If you remove the air cleaner filter
Driving with the air cleaner filter removed may cause excessive engine wear
due to dirt in the air. Also a backfire could cause a fire in the engine compart-
ment.

4904-3. Do-it-yourself maintenance
VENZA_OM_OM73030U_(U) CAUTION■ When raising your vehicle
Make sure to observe the following to reduce the possibility of death or seri-
ous injury.
● When using a floor jack, follow the instructions of the manual provided with
the jack.
● Do not use the jack that was supplied with your vehicle.
● Do not put any part of your body or get underneath the vehicle supported
only by the floor jack.
● Always use floor jack and/or automotive jack stands on a solid, flat, level
surface.
● Do not start the engine while the vehicle is supported by the floor jack.
● Stop the vehicle on level firm ground, firmly set the parking brake and put
the shift lever in “P”.
● Make sure to set the floor jack properly at the jack point.
Raising the vehicle with an improperly positioned floor jack will damage
the vehicle and may cause the vehicle to fall off the floor jack.
● Do not raise the vehicle while someone is in the vehicle.
● When raising the vehicle, do not place any objects on top of or underneath
the floor jack. ● Lift up the vehicle using a floor jack
such as the one shown in the illustra-
tion.

5204-3. Do-it-yourself maintenance
VENZA_OM_OM73030U_(U)Air conditioning filter The air conditioning filter must be changed regularly to maintain air
conditioning efficiency.
■ Removal method
Vehicles with smart key system:
Turn the “ENGINE START STOP” switch off.
Vehicles without smart key system:
Turn the engine switch to the “LOCK” position.
Open the glove box. Slide off
the damper.
Push each side of the glove
box to release the pins. Then
disconnect the claws at the
bottom and remove the glove
box.STEP 1
STEP 2
STEP 3

5274-3. Do-it-yourself maintenance
4
Maintenance and care
VENZA_OM_OM73030U_(U) Checking and replacing fuses If any of the electrical componen ts do not operate, a fuse may have
blown. If this happens, check and replace the fuses as necessary.
Vehicles with smart key system:
Turn the “ENGINE START STOP” switch off.
Vehicles without smart key system:
Turn the engine switch to the “LOCK” position.
Open the fuse box cover.
Engine compartment
Push the tab in and lift the lid
off.
Driver’s side instrument panel
Remove the lid.STEP 1
STEP 2

5334-3. Do-it-yourself maintenance
4
Maintenance and care
VENZA_OM_OM73030U_(U) ■ Driver’s side instrument panel
Fuse Ampere Circuit1 RR DOOR 20 A
Power windows
2 RL DOOR 20 A
Power windows
3 FR DOOR 20 A
Power windows
4 FR FOG 15 A
Fog lights
5 OBD 7.5 A
On-board diagnosis system
6 FL DOOR 20 A
Power windows
7 STOP 10 A Stop lights, vehicle stability con-
trol system
8 AM1 7.5 A
Starting system
9 ECU-B NO.2 7.5 A Steering sensor, air conditioning
system, power windows
10 4WD 7.5 A
Active Torque Control 4WD

When trouble arises
5
553
VENZA_OM_OM73030U_(U) 5-1. Essential information
Emergency flashers ......... 554
If your vehicle needs
to be towed .................... 555
If you think something
is wrong ......................... 561
Fuel pump shut off
system ........................... 563 5-2. Steps to take in an
emergency
If a warning light turns
on or a warning
buzzer sounds... ........... 564
If a warning message is
displayed........................ 578
If you have a flat tire......... 579
If the engine will
not start .......................... 590
If the shift lever cannot
be shifted from “P” ......... 593
If you lose your keys ........ 594
If the electronic key does
not operate properly
(vehicles with smart
key system).................... 595
If the battery is
discharged ..................... 598
If your vehicle
overheats ....................... 603
If the vehicle becomes
stuck .............................. 606
If your vehicle has
to be stopped in an
emergency ..................... 608

5
When trouble arises
5595-1. Essential information
VENZA_OM_OM73030U_(U) CAUTION■ While towing
● When towing using cables or chains, avoid sudden starts, etc. which place
excessive stress on the towing eyelets, cables or chains. The towing eye-
lets, cables or chains may become damaged, broken debris may hit peo-
ple and cause serious damage.
● Vehicles with smart key system:
Do not turn the “ENGINE START STOP” switch off.
There is a possibility that the steering wheel is locked and cannot be oper-
ated.
Vehicles without smart key system:
Do not turn the engine switch to the “LOCK” position.
There is a possibility that the steering wheel is locked and cannot be oper-
ated.