2016 TOYOTA VENZA CD player

3623-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U)Using the AUX port Connecting a portable audio player
 P. 3 2 5■ Operating portable audio players connected to the audio system
The volume can be adjusted using the vehicle’s audio controls. All other
adjustments must be made on the portable audio player itself.
■ When using a portable audio player connected to the power outlet
Noise may occur during playback. Use the power source of the portable
audio player.
CAUTION■ While driving
Do not connect a portable audio player or operate the device controls.To use the AUX port, connect a portable player, press the “AUDIO”
button, then select “AUX” to display the audio control screen.

3633-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features
Preparations to use wireless communication The following can be performed using Bluetooth ®
wireless commu-
nication:
■ A portable audio player can be operated and listened to via
audio system
■ Hands-free phone calls can be made via a cellular phoneIn order to use wireless communi cation, register and connect a
Bluetooth ®
device by performing the following procedures.

3663-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) Registering a Bluetooth ®
audio player for the first timeTurn the Bluetooth ®
connection setting of your audio player
on.
Press the “AUDIO” button.
Select “ Audio”.
Select “Select Device”.
Follow the steps in “How to registering a Bluetooth ®
device”
from . (  P. 368)To use the Bluetooth ®
Audio, it is necessary to register an audio
player with the system.
Once the player has been register ed, it is possible to use the
Bluetooth ®
Audio.
For details about registering a Bluetooth ®
device (  P. 368)STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 2

3683-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U)Registering a Bluetooth ®
deviceHow to register a Bluetooth ®
device
Display the “Bluetooth
* Setup” screen. (  P. 365)
* : Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Select “Add”.
When this screen is displayed,
search for the device name dis-
played on this screen on the
screen of your Bluetooth ®
device. For details about operating the
Bluetooth ®
device, see the man-
ual that comes with it.
To cancel the registration, select
“Cancel”.
Register the Bluetooth ®
device using your Bluetooth ®
device.A PIN-code is not required for SSP (Secure Simple Pairing) compat-
ible Bluetooth ®
devices. Depending on the type of Bluetooth ®
device
being connected, a message confirming registration may be dis-
played on the Bluetooth ®
device’s screen. Respond and operate the
Bluetooth ®
device according to the confirmation message.Bluetooth ®
compatible phones (HFP) and portable audio players
(AVP) can be registered simultane ously. You can register up to 5
Bluetooth ®
devices.STEP 1
STEP 2
STEP 3
STEP 4

3703-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U)Connecting a Bluetooth ®
devicePress the “SETUP” button.
Select “Bluetooth
* ”.
* : Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Select the device to be con-
nected. Supported profile icons will be
displayed.
Phone
Audio player Supported profile icons for cur-
rently connected devices will illu-
minate.
Dimmed icons can be selected to
connect to the function directly.Up to 5 Bluetooth ®
devices (Phones (HFP) and audio players (AVP))
can be registered.
If more than 1 Bluetooth ®
device has been registered, select which
device to connect to. STEP 1
STEP 2
STEP 3

3713-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features Auto connection
To turn auto connection mode on, set “Bluetooth
* Power” to on.
(  P. 375)
When you register a phone, auto connection will be activated. Always
set it to this mode and leave the Bluetooth ®
phone in a place where a
connection can be established. When the engine switch is turned to the “ACC” or “ON” position (vehicles
without a smart key system) or ACCESSORY or IGNITION ON mode
(vehicles with a smart key system), the system will search for a nearby
cellular phone you have registered.
Next, the system automatically connects with the most recent of the
phones connected to in the past. Then, the connection result is displayed.
Manual connection
When auto connection has failed or “Bluetooth
* Power” is turned off,
you must connect the Bluetooth ®
device manually.
* : Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Follow the steps in “Connecting a Bluetooth ®
device” from
. (  P. 370)
Connecting a Bluetooth ®
audio player
Registering an additional device
Select “Select Devi ce” on the Bluetooth ®
audio control
screen.
For more information:  P. 3 6 8
Selecting a registered device
Select “Select Devi ce” on the Bluetooth ®
audio control
screen.
For more information:  P. 3 7 0STEP 1
STEP 1
STEP 1
STEP 2
STEP 1
STEP 2

3743-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) Changing connection method
Select “Connect Audio Player from”.
Select “Vehicle” or “Device”. “Vehicle”: Connect the audio system to the portable audio player.
“Device”: Connect the portable audio player to the audio system STEP 1
STEP 2

3753-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features
Detailed Bluetooth ®
system settingsHow to check and change detailed Bluetooth ®
settings
Display the “Bluetooth
* Setup” screen. (  P. 365)
Select “System Settings”.
The following screen is displayed:
Bluetooth ®
Power on/offYou can change Bluetooth ®
func-
tion
on/off
Bluetooth ®
Name
Change PIN-code (  P. 376)
Bluetooth ®
Address
Display Phone Status You can set the system to show
the status confirmation display
when connecting a telephone
Display Audio Player Status You can set the system to show
the status confirmation display
when connecting an audio player
Compatibility profile of the sys-
tem
Restore default settings
* : Bluetooth is a registered trade-
mark of Bluetooth SIG, Inc.You can confirm and change the detailed Bluetooth ®
settings.STEP 1
STEP 2
STEP 3