2016 TOYOTA PRIUS C load capacity

[x] Cancel search: load capacity

Page 175 of 588

TOYOTA PRIUS C 2016 NHP10 / 1.G Owners Manual 1754-1. Before driving
4
Driving
PRIUS c_U (OM52F96U)
Cargo capacity depends on the total weight of the occupants. 
(Cargo capacity) = (Total load capaci ty) — (Total weight of occupants)
Steps for

Page 176 of 588

TOYOTA PRIUS C 2016 NHP10 / 1.G Owners Manual 1764-1. Before driving
PRIUS c_U (OM52F96U)
Cargo capacity
Total load capacity (vehicle
capacity weight) (P. 526)
When 2 people with the combined weight of A lb. (kg) are riding in
your vehicle, wh

Page 177 of 588

TOYOTA PRIUS C 2016 NHP10 / 1.G Owners Manual 1774-1. Before driving
4
Driving
PRIUS c_U (OM52F96U)
As shown in the example above, if the number of occupants
increases, the cargo and luggage load will be reduced by an amount
that equals the incre

Page 178 of 588

TOYOTA PRIUS C 2016 NHP10 / 1.G Owners Manual 1784-1. Before driving
PRIUS c_U (OM52F96U)
WARNING
■Capacity and distribution
●Do not exceed the maximum axle weight rating or the total vehicle
weight rating. 
●Even if the total load of occup

Page 179 of 588

TOYOTA PRIUS C 2016 NHP10 / 1.G Owners Manual 1794-1. Before driving
4
Driving
PRIUS c_U (OM52F96U)
◆Total load capacity (vehicle capacity weight): (P. 526)
Total load capacity means the combined weight of occupants, cargo
and luggage.
◆Se

Page 266 of 588

TOYOTA PRIUS C 2016 NHP10 / 1.G Owners Manual 2664-6. Using the driving support systems
PRIUS c_U (OM52F96U)
WARNING
■When the TRAC/VSC /ABS are activated
The slip indicator light flashes. Always drive carefully. Reckless driving may
cause an a

Page 432 of 588

TOYOTA PRIUS C 2016 NHP10 / 1.G Owners Manual 4327-3. Do-it-yourself maintenance
PRIUS c_U (OM52F96U)■
Maximum load of tire
Check that the maximum load of the re
placement tire is greater than 1/2
of the Gross Axle Weight Ratings (GAWR) of eith

Page 440 of 588

TOYOTA PRIUS C 2016 NHP10 / 1.G Owners Manual 4407-3. Do-it-yourself maintenance
PRIUS c_U (OM52F96U)
When replacing wheels, care should be taken to ensure that they are
equivalent to those removed in load capacity, diameter, rim width and
inset
Page:   1-8 9-16 next >