2016 TOYOTA C-HR lock

991-3. Theft deterrent system
1
For safety and security
C-HR_OM_Europe_OM10528E
■ Triggering of the alarm
The alarm may be triggered in the following situations:
(Stopping the alarm deactivates the alarm system.)
● The doors are unlocked using the key*1
or mechanical key*2.
*1: Vehicles without a smart entry & start
system
*2: Vehicles with a smart entry & start sys-
tem
● A person inside the vehicle opens a door
or hood, or unlocks the vehicle using an
inside lock button.
● The battery is recharged or replaced
when the vehicle is locked. ( P. 7 5 0 )

1001-3. Theft deterrent system
C-HR_OM_Europe_OM10528E
■ Alarm-operated door lock
In the following cases, depending on the situation, the door may automatically
lock to prevent improper entry into the vehicle:
● When a person remaining in the vehicle unlocks the door and the alarm is
activated.
● While the alarm is activated, a person remaining in the vehicle unlocks the
door.
● When recharging or replacing the battery
NOTICE
■To ensure the system operates correctly
Do not modify or remove the system. If modified or removed, the proper
operation of the system cannot be guaranteed.

1011-3. Theft deterrent system
1
For safety and security
C-HR_OM_Europe_OM10528E
The intrusion sensor detects intruders or movement in the vehicle.
This system is designed to deter and prevent vehicle theft but does
not guarantee absolute security against all intrusions.
■Setting the intrusion sensor
The intrusion sensor will be set automatically when the alarm is set.
( P. 9 7 )
■Canceling the intrusion sensor
If you are leaving pets or other moving things inside the vehicle,
make sure to disable the intrusion sensor before setting the alarm,
as it will respond to movement inside the vehicle.
Turn the engine switch to the “LOCK” position (vehicles without a
smart entry & start system) or off (vehicles with a smart entry &
start system).
Press the theft sensor off
switch.
A message will be shown on the
multi-information display.
The intrusion sensor will revert
to on each time the engine
switch is turned to the ON posi-
tion (vehicles without a smart
entry & start system) or IGNI-
TION ON mode (vehicles with a
smart entry & start system).
Intrusion sensor (if equipped)
1
2

1021-3. Theft deterrent system
C-HR_OM_Europe_OM10528E
■Canceling and automatic re-enabling of the intrusion sensor
● The alarm will still be set even when the intrusion sensor is canceled.
● Vehicles without a smart entry & start system: After the intrusion sensor is
canceled, turn the engine switch to the “LOCK” position or unlocking the
doors using the wireless remote control will re-enable the intrusion sensor.
Vehicles with a smart entry & start system: After the intrusion sensor is can-
celed, pressing the engine switch or unlocking the doors using the entry
function or wireless remote control will re-enable the intrusion sensor.
● The intrusion sensor will automatically be re-enabled when the alarm sys-
tem is deactivated.
■ Intrusion sensor detection considerations
The sensor may trigger the alar m in the following situations:
• The movement of people outside the vehicle
● People or pets are in the vehicle.
● A side window is open.
In this case, the sensor may detect the
following:
• Wind or the movement of objects
such as leaves and insects inside the
vehicle
• Ultrasonic waves emitted from
devices such as the intrusion sensors
of other vehicles

1252. Instrument cluster
2
Instrument cluster
C-HR_OM_Europe_OM10528E
●Average fuel consumption and current fuel consumption
Displays the average fuel consumption since the function was last
reset.
• The function can be reset by pressing the “DISP” switch for lon-
ger than 1 second when the average fuel consumption is dis-
played.
• Use the displayed average fuel consumption as a reference.
Displays the current rate of fuel consumption.
Use the displayed current rate of fuel consumption as a reference.
● Driving range
Displays the estimated maximum distance that can be driven with
the quantity of fuel remaining.
• This distance is computed based on your average fuel consump-
tion. As a result, the actual distance that can be driven may differ
from that displayed.
• When only a small amount of fuel is added to the tank, the dis-
play may not be updated.
When refueling, turn the engine switch to the “LOCK” position.
If the vehicle is refueled without turning the engine switch to the “LOCK”
position, the display may not be updated.
● Average vehicle speed
Displays the average vehicle speed since the engine was last
started.
● Elapsed time
Displays the elapsed time since the engine was started.
Drive information

143
3
Operation of
each component
C-HR_OM_Europe_OM10528E
3-1. Key information
Keys ................................... 144
3-2. Opening, closing and
locking the doors
Side doors.......................... 155
Back door........................... 165
Smart entry & start
system ............................. 171
3-3. Adjusting the seats
Front seats ......................... 186
Rear seats ......................... 188
Head restraints .................. 190
3-4. Adjusting the steering
wheel and mirrors
Steering wheel ................... 194
Inside rear view mirror ....... 196
Outside rear view
mirrors ............................. 198
3-5. Opening and closing
the windows
Power windows .................. 201

1453-1. Key information
3
Operation of each component
C-HR_OM_Europe_OM10528E
Vehicles without a smart entry & start system
Locks all the doors ( P. 156)
Closes the windows*
( P. 156)
Unlocks all the doors ( P. 156)
Opens the windows* ( P. 156)
*: These settings must be custom-
ized at any authorized Toyota
retailer or Toyota authorized
repairer, or any reliable repairer.
Vehicles with a smart entry & start system
Locks all the doors ( P. 156)
Closes the windows*
( P. 156)
Unlocks all the doors ( P. 156)
Opens the windows* ( P. 156)
*: These settings must be custom-
ized at any authorized Toyota
retailer or Toyota authorized
repairer, or any reliable repairer.
Wireless remote control
1
2
3
4
1
2
23
4

1463-1. Key information
C-HR_OM_Europe_OM10528E
Press the button to open the key.
To stow, press the button then fold
the key.
To take out the mechanical key,
slide the release lever and take
the key out.
The mechanical key can only be
inserted in one direction, as the
key only has grooves on one side.
If the key cannot be inserted in a
lock cylinder, turn it over and re-
attempt to insert it.
After using the mechanical key, store it in the electronic key. Carry the
mechanical key together with the electronic key. If the electronic key bat-
tery is depleted or the entry func tion does not operate properly, you will
need the mechanical key. ( P. 747)
Using the key (vehicles without a smart entry & start system)
Using the mechanical key (vehicles with a smart entry & start
system)