2016 SUBARU OUTBACK steering wheel

3
Ignition switch must be in ACC or ON position.
1 Select side to adjust
2 To adjust the mirror, move the switch in the
direction of your desired position.
Adjustable components
1 Forward and backward adjustment
2 Seat cushion angle adjustment
3 Seat height adjustment
4 Seatback angle (reclining) adjustment
5 Lumber support adjustment
1 Forward and backward adjustment
2 Seat cushion height adjustment (Driver's seat only)
3 Seatback reclining adjustment
Power seat (Driver’s seat-if equipped):
Manual seat (if equipped):
Front seat
Tilt/ telescopic steering wheel
Remote control mirror switch
1 Adjust the seat position and pull the tilt/
telescopic lock lever down.
2 Move the steering wheel to the desired level.
3 Pull the lever up to lock the steering wheel in
place.
Make sure that the steering wheel is securely
locked by moving it up and down, and forward and
backward.
1
2
3
2
1
2
3
2
12
1
2
4
3
5

5
You must raise the slider and hold it in that position
before you can move the shift lever to the R position.
To change gears, fully depress the clutch pedal, move
the shift lever, and gradually let up on the clutch pedal.
Shift paddle:
Gearshifts can be performed using the shift paddle
behind the steering wheel.
Operate Select lever/ Shift lever
M = Manual mode:
With the vehicle either moving or stationary, move the
select lever from the D position to the M position to
select the manual mode.
Continuously variable transmission (if equipped)
Manual transmission (if equipped)
With the brake pedal depressed, shift while pressing the button in
Shift while pressing the button in
Shift without pressing the button
Select lever button
DownshiftUpshift

10
Deactivate the Hill Holder function when:
• Towing a trailer
• Carrying a heavy load
• When you do not frequently stop your vehicle on an
uphill slope using the parking brake.
Tilting Sliding
Moonroof switch (if equipped)
1 Raise
2 Lower
1 Open
2 Close
Hill Holder switch
*The design may be slightly different from the illustration depending on the models.
Audio control buttonsL
These buttons allow the driver to control audio functions
without taking his/her hands off the steering wheel.
2
1
2
1
Activate / Deactivate
Press
0058 Some functions are available on certain models. 00030058 For detailed operating and safety information, please refer to your Own\
er’s Manual.

15
X-mode has the following functions.
Hill descent control function : Using this function, you can keep the vehicle at a
consistent speed driving downhill. If the vehicle speed
is likely to increase, the brake control system will be
activated to adjust the vehicle speed.
Driving ability control : This mode increases the hill-climbing ability and driving
ability as well as enabling smooth application of torque for
easier control of the steering wheel.
X-mode switch (Outback CVT models)
X-mode assists driving more comfortably even in slippery road conditions including uphill
and downhill.
X-mode switchX-mode indicator
Memory switch (if equipped)G
Your desired rear gate height can be registered.

16
Some warning/ indicator lights illuminate for a few seconds in order to check themselves
when the ignition switch is turned ON.
MAIN WARNING AND INDICATOR LIGHTS
Warning lights
Refer to your Owner’s Manual for countermeasures when each warning light comes on.
If necessary, consult your authorized SUBARU dealer.
Seatbelt warning
Remind the driver to fasten
seatbelt.
Front passenger’s seatbelt warning
Remind the front passenger to
fasten seatbelt. Location: next to
overhead console.
Oil pressure warning
The engine oil pressure is too
low.
Engine low oil level warning
The engine oil level decreases to
the lower limit.
All-wheel drive warning (CVT models)
Tires of different diameter fitted/
air pressure excessively low.
SRS airbag system warning
SRS airbag system and/
or seatbelt pretensioners
malfunction.
Power steering warning
The electric power steering
system malfunction.
AT OIL TEMP warning (CVT models)
Transmission fluid temperature
is too hot./ Transmission control
system malfunction.
Automatic headlight beam leveler warning
Automatic headlight beam leveler
malfunction.
ABS warning
Anti-lock Brake System malfunction
/ EBD System malfunction.
(Brake System warning light
illuminates simultaneously).
Brake system warning
Electronic parking brake system malfunction/ Brake fluid level/ EBD System
malfunction (Anti-lock brake system warning light illuminates simultaneously).
Malfunction indicator (Check Engine)
Engine/ Emission control system
malfunction.
Charge warning
Charging system malfunction.
u Some functions are available on certain models. u For detailed operating and safety information, please refer to your Own\
er’s Manual.