2016 SUBARU OUTBACK key

2
Remote keyless entry system
Remote transmitter key (if equipped)
Access key(if equipped)
Lock/ Unlock doors
PANIC
B A S I C O PE R AT I O N
*
Grip the driver’s door handle to unlock the
driver’s door. Grip the front passenger’s door
handle to unlock all doors.
All doors will be locked/unlocked by the following procedures carrying the access key on
your person. (The driver should always carry the access key.)
For detailed operating and safety information, please refer to
your Owner’s Manual.
Keyless access function (if equipped)
Side door (front door handles only):
1 All doors will be locked.
2 The driver’s door will be unlocked.
(To unlock all doors, briefly press the button
a second time within 5 seconds.)
3 Press and hold to open the trunk.
4 The horn will sound and the hazard warning
flashes will flash.
Opening rear gate:
Press
23
4
1
1
2
3
4
Locking
Unlocking*
Door lock sensor
Grip
To u c h
u Some functions are available on certain models. u For detailed operating and safety information, please refer to your Own\
er’s Manual.

4
Start/ Stop engine
The key can be turned from ACC to LOCK
only when the key is pushed in while turning
it (all models) and the select lever is in the
P position (CVT models).
Push-button ignition switch (if equipped)
Electronic parking brake switch Ignition switch (if equipped)
*The design may be slightly different from the illustration depending on the models.
Starting engine:
1. Carry the access key, and sit in the driver’s seat.
2. Apply the parking brake.
3. Shift the select lever in the P position (CVT models) or shift lever in neutral (MT models).
4. Depress the brake pedal (CVT models) or brake pedal and clutch pedal (MT models) until the indicator on the push-button ignition switch turns green.
5. While depressing the brake pedal (CVT models) or clutch pedal (MT models), press the push-button ignition switch.To stop engine:
1. Stop the vehicle completely.
2. Move the select lever to the P position (CVT models) or shift lever in neutral (MT models).
3. Press the push-button ignition switch.
Every time the button is pressed without depressing the brake pedal, the\
power is switched
in the sequence of OFF➞ACC➞ON➞OFF.
OFF ( Tu r n e d o f f )ACC (Orange)ON (Orange)
Operation indicator
Apply
Release
X Some functions are available on certain models. X For detailed operating and safety information, please refer to your Own\
er’s Manual.

17
Windshield washer fluid warning
The fluid level in the windshield
washer fluid tank decreases to
the lower limit.
BSD/ RCTA warning
Blind Spot Detection/ Rear
Cross Traffic Alert (BSD/ RCTA)
malfunction.
Vehicle Dynamics Control warning/ Vehicle Dynamics Control operation indicator
Warning : Vehicle Dynamics Control system malfunction.
Indicator : Flashes during activation of the skid suppression function and the traction control function.
Icy road surface warning screen
When the outside temperature becomes 3°C (37°F) or less, the icy road surface
warning screen interrupts to inform the driver that the road surface may be
frozen.
Indicator lights
The following indicators show the current status of your car. Refer to your Owner’s Manual
for more information.
Low fuel warning
Fuel tank is nearly empty. Refill
fuel immediately.
Access key warning
The access key is not inside the
vehicle. For other situations,
refer to your Owner’s Manual.
Turn signal indicatorHeadlight indicatorHigh beam indicator
Front fog light indicatorSecurity indicatorDoor open indicator
BSD/ RCTA OFF indicatorCruise control indicatorCruise control set indicator
Hill Holder indicator
Hill descent control indicator
X mode indicator
Electronic parking brake indicatorSteering responsive fog lights OFF indicator
Vehicle Dynamics Control OFF indicatorFront passenger’s frontal airbag ON/OFF indicator