2016 SUBARU OUTBACK height

3
Ignition switch must be in ACC or ON position.
1 Select side to adjust
2 To adjust the mirror, move the switch in the
direction of your desired position.
Adjustable components
1 Forward and backward adjustment
2 Seat cushion angle adjustment
3 Seat height adjustment
4 Seatback angle (reclining) adjustment
5 Lumber support adjustment
1 Forward and backward adjustment
2 Seat cushion height adjustment (Driver's seat only)
3 Seatback reclining adjustment
Power seat (Driver’s seat-if equipped):
Manual seat (if equipped):
Front seat
Tilt/ telescopic steering wheel
Remote control mirror switch
1 Adjust the seat position and pull the tilt/
telescopic lock lever down.
2 Move the steering wheel to the desired level.
3 Pull the lever up to lock the steering wheel in
place.
Make sure that the steering wheel is securely
locked by moving it up and down, and forward and
backward.
1
2
3
2
1
2
3
2
12
1
2
4
3
5

11
Located on the edge of each rear door.
When the lever is in the LOCK position, the rear door
cannot be opened from the inside.
1 To lower:
Push the upper part of the anchor and slide it down.
2 To raise:
Slide the anchor up.
Child safety locks
Front seat shoulder belt anchor height
21

15
X-mode has the following functions.
Hill descent control function : Using this function, you can keep the vehicle at a
consistent speed driving downhill. If the vehicle speed
is likely to increase, the brake control system will be
activated to adjust the vehicle speed.
Driving ability control : This mode increases the hill-climbing ability and driving
ability as well as enabling smooth application of torque for
easier control of the steering wheel.
X-mode switch (Outback CVT models)
X-mode assists driving more comfortably even in slippery road conditions including uphill
and downhill.
X-mode switchX-mode indicator
Memory switch (if equipped)G
Your desired rear gate height can be registered.