2016 SUBARU CROSSTREK display

OTHER SETTINGS
196
VOICE SETTINGS
Voice volume, etc. can be set.
1.Select.
2.SelectSETTINGS (SETTINGS).
3.SelectVoice (Voice).
4.Select the items to be set.
NOTE
O
“Voice Settings (Voice Settings)” screen can also be displayed
IURPWKHYRLFHUHFRJQLWLRQWRSVFUHHQ
:3
VOICE SETTINGS SCREEN
No. Function
Select to adjust the volume of voice guidance.
Select to set the voice recognition prompts.
Select to reset all setup items.

BASIC OPERATION
198
BASIC OPERATION
QUICK REFERENCE
MAP SCREEN
To display this screen, select , or select and
then select
MAP (MAP).
No. Name
Information/Function Page
2D North-up, 2D
heading-up or
3D symbolSelect to change the map
display mode between 2D
north-up, 2D heading-up
or 3D. In 3D map, only
a heading-up view is
available.
205
*
7UDI

BASIC OPERATION
199
NAVIGATION SYSTEM
8
No. NameInformation/Function Page
*Highway
information Select to display the
highway information.
224
Speed Limit
indicatorDisplays the speed limit for
the road being driven on.
-
*: The default setting is not displayed, and can be displayed from “Disp\
lay
RQ0DS'LVSOD\RQ0DS

BASIC OPERATION
200
No. OperationFunction
Point
informationSelect to open another screen
displaying information on the
selected map position (cursor). When
Bluetooth is enabled on your cellular
phone, a call can be placed if the
displayed information screen contains
phone number information.
Return to
normal
navigation
Select to return the map to the current
GPS position. Auto map rotation is
also enabled. The map operation
buttons are not displayed, and
navigation restarts.
Tilt up/down
Select to change the vertical display
angle of the map in 3D mode. Select
and hold to continue changing the
motion of the map screen.
No. Operation
Function
Selecting a
destinationSelect to select the cursor as a new
destination. The route is researched
automatically.
Additional
functionsSelect to display the additional
functions list. For example, saving
the cursor to the destination list, and
searching the area around the cursor.
Zoom in/out
Select to change the area of the map
displayed on the screen. Select and
hold to continue changing the scale of
the map screen.
NOTE
O
The map screen scale can be changed by double-touching or
SLQFKLQJWKHVFUHHQ
:3
O The map direction can be changed by rotating the screen.

:3

BASIC OPERATION
201
NAVIGATION SYSTEM
8
NAVIGATION MENU
When you select Menu (Menu) on the navigation screen,
the navigation menu (main menu) appears. You can access
all of the software’s functions from this menu.
No. Function
Select to start navigation on the map. The button itself
shows the current position, recommended route, and
reduces the surrounding area to display on the map
being used. Select to enlarge the map to full-screen
size.
No.Function
Select to search for a destination. You can select which
method to use to reach your destination by entering the
address, selecting a favorite spot, selecting a position
on the map, or selecting from the destination list. You
can also select recent destinations from Smart History,
or enter coordinates into the system.
Select to perform various route related functions such
as editing or canceling the route, setting the route
departure point, selecting a different route, avoiding a
part of the route, performing a navigation simulation, or
adding an entry to the destination list.
Select to set the navigation software operating method,
start the tutorial, show a demo route simulation, or start
various other auxiliary applications.
Select or to adjust the guidance volume.
Select to clear the route and cancel navigation.
6HOHFWWRRSHQWKH³7UDI¿F6XPPDU\7UDI¿F6XPPDU\´
screen.
NOTE
OGuidance volume can be adjusted during guidance by turning
the “POWER/VOLUME” knob, or by using the volume control
switch on the steering wheel.

BASIC OPERATION
203
NAVIGATION SYSTEM
8
MAP SCREEN OPERATION
CURRENT POSITION DISPLAY
1.Select, or select and then select MAP
(MAP).
2.Check that the current position map is displayed.
NOTE
O :KLOH GULYLQJ WKH FXUUHQW SRVLWLRQ PDUN LV

BASIC OPERATION
206
POSITION MARKER
SELECTED MAP LOCATION (CURSOR)
Use one of the following methods to mark a map location.
”Select the map during navigation.

” Select the map when the destination you want is
displayed in the search results.

” Select the map in “Find on Map (Find on Map)”.
You can use the cursor’s position as the route’s destination,
search for locations around the cursor, and save the position
in the destination list.
”After selecting a map location, a cursor is displayed
at the point selected on the map. The cursor is
displayed as a red point (
) and can be checked at
all zoom levels.
TRAFFIC INFORMATION
DISPLAYING TRAFFIC INFORMATION
5RDG VHFWLRQV DIIHFWHG E\ WUDI

DESTINATION SEARCH
207
NAVIGATION SYSTEM
8
DESTINATION SEARCH
DESTINATION SEARCH SCREEN
The “Destination (Destination)” screen enables to search
for a destination. To display the “Destination (Destination)”
screen, select
, or select and then select
MAP (MAP), and select Menu (Menu) on the “MAP
(MAP)” screen. Then select
Destination (Destination) on
the navigation menu screen.
No. Function Page
Select to search for a destination by address. 209
Select to search for a destination by point of
interest. 212
Select to search for a destination by the map. 216
Select to search for a destination from
destination list.216
Select to search for a destination from
frequently used destination.217
Select to search for a destination from
previously set destinations.217
Select to search for a destination by
coordinates.217
Select to set a destination by home.
209