seat belts .............................................. (up to the end of the DU)
1.18
ENG_UD9537_2
Ceintures de sécurité (X76 - Renault)
ENG_NU_854-2_X76LL_Renault_1
Jaune NoirNoir texte
Seat belts
SEAT BELTS (1/4)
1
2
Always wear your seat belt when trav-
elling in your vehicle. You must also
comply with the legislation of the par-
ticular country you are in.
Before starting, first adjust your driv-
ing position, then ask all occupants
to adjust their seat belt to ensure op-
timum protection.
I n c o r r e c t l y a d j u s t e d o r
twisted seat belts may
cause injuries in the event
of an accident.
Use one seat belt per person,
whether child or adult.
Even pregnant women should wear
a seat belt. In this case, ensure that
the lap belt is not exerting too much
pressure on the abdomen, but do
not allow any slack.
Adjusting your driving
position
(certain adjustments depend on the ve-
hicle’s equipment level)
– Sit well back in your seat (having
first removed your coat or jacket).
This is essential to ensure your back
is positioned correctly;
–
adjust the distance between the
seat and the pedals. Your seat
should be as far back as possible
while still allowing you to depress
the clutch pedal fully. The seatback
should be adjusted so that your arms
are slightly bent when you hold the
steering wheel;
–
adjust the position of your head -
rest. For the maximum safety, your
head must be as close as possible to
the headrest;
–
adjust the height of the seat. This
adjustment allows you to select the
seat position which offers you the
best possible view;
– adjust the position of the steering
wheel.
Adjusting the seat belts
Sit with your back firmly against the
seatback.
Shoulder
strap 1 should be as close as
possible to the base of the neck but not
on it.
Lap
belt 2 should be worn flat over the
thighs and against the pelvis.
The belt should be worn so that it is
as close as possible to your body, i.e.:
avoid wearing heavy clothing or keep-
ing bulky objects under the belts, etc.
headlight beam adjustment .................. (up to the end of the DU) 1.49
ENG_UD7270_1
Réglage électrique de la hauteur des faisceaux (X76 - Renault)
ENG_NU_854-2_X76LL_Renault_1
Headlight beam adjustment
ELECTRICAL ADJUSTMENT OF THE DIPPED BEAM HEADLIGHTS
Control knob A is used to adjust the
height of the headlight beams accord-
ing to the load.
T
urn control knob A to the left to lower
the headlights and to the right to raise
them.
Load status Examples of positions for adjusting
control A according to the load.
Driver only or with passenger 0
All seats occupied 1
Intermediate position
According to driver’s judgement 2
Driver only with luggage compartment
laden
(1)3
Increased payload version: 4
All seats occupied with luggage com-
partment loaded
(1)4
(1) Load status at maximum permitted weight.
A
