
1.75
Heated door mirrorsWith the engine running, mirror de-
icing is activated simultaneously with 
rear screen de-icing/demisting.
Folding door mirrors
(depending on vehicle)
Move button 1  to position F: the door 
mirrors fold away. To reset them for 
driving, return to position  C, D or E.
If you manually fold the door mirrors, 
before setting them to the driving posi-
tion (C , D , E ), you must position con-
trol 1 to F.
The driver’s door mirror 
may have two clearly de-
fined zones. Zone  B shows 
what can normally be seen 
in an ordinary rear view mirror. 
Zone A increases rear side visibility.
Objects in the mirror are closer 
than they appear.
Door mirrors with electrical 
adjustment
With the ignition on , turn button 1:
– position  C to adjust the left-hand 
door mirror;
– position  E to adjust the right-hand 
door mirror;
D is the inactive position.
REAR VIEW MIRRORS
AB
DC
E
For safety reasons, carry 
out any adjustments when 
the vehicle is not being 
driven.
Interior rear view mirrorIts position can be adjusted.
Rear-view mirror with lever 2
For night driving, to avoid being dazzled 
by the headlights of the car behind you, 
flip the small lever  2 located behind the 
rear view mirror.
Rear view mirror without lever 2
The rear view mirror darkens automa-
tically at night if you are being followed 
by a vehicle with its lights on.
F
2
1   

1.76
Daytime running lights 
function 
(front lights only)
Depending on the vehicle, the daytime 
running lights come on automatically 
when the engine is started.
EXTERIOR LIGHTING AND SIGNALS (1/3)
šSide lights
Turn the ring 2 until the symbol 
is opposite mark  3.
An indicator light on the instrument 
panel will come on.
1
Before driving at night, check that the electrical equipment is operatin\
g 
correctly and adjust the headlight beams (if your vehicle is not carryi\
ng 
its normal load). As a general precaution, check that the lights are not ob-
scured (by dirt, mud, snow or objects being transported).
The daytime running lights function is 
activated by default. Depending on the 
vehicle, it can be deactivated. Please 
refer to the multimedia touchscreen 
system instructions.
kDipped beam 
headlights
Manual operation
Turn the ring  2 until the symbol is oppo-
site mark  3. This indicator light on the 
instrument panel comes on.
Automatic operation
(depending on vehicle)
Turn ring  2 until the AUTO symbol is op-
posite mark  3: with the engine running, 
the dipped beam headlights switch on 
or off automatically depending on the 
brightness of the light outside, without 
any action on stalk  1.
If driving on the left in a left-hand 
drive vehicle (or vice versa), driv-
ers must have the lights adjusted 
(except for vehicles fitted with xenon 
bulbs) by an authorised dealer for 
the duration of the trip.
312   

1.77
EXTERIOR LIGHTING AND SIGNALS (2/3)
Switching off the lights
There are two possibilities:
–  Manually, move ring 2 to position 0;
–  automatically, if the ring 2 is in AUTO  position and if the main beam head-
lights are not switched on. The 
lights go out automatically when the 
engine is switched off, when the driv-
er’s door is opened or the vehicle is 
locked. In this case, the next time 
the engine is started, the lights will 
be switched back on according to the 
position of the ring  2, taking into ac-
count the exterior light level, without 
moving the stalk 1.
NB: if the fog lights are lit, the lights are 
not switched off automatically.
Lights-on reminder buzzer
If the lights are switched on after the 
engine is switched off, a warning 
beep sounds when the driver’s door is 
opened to warn you that the lights are 
still on.
12
áMain beam headlightsWith the engine running and 
the dipped beam headlights lit, push 
stalk  1. This indicator light on the instru-
ment panel comes on.
To return to the dipped headlight posi-
tion, pull stalk 1 towards you again.  

1.78
EXTERIOR LIGHTING AND SIGNALS (3/3)
fRear fog light
Turn centre ring 4 on the stalk 
until the symbol faces mark  5, then re-
lease it.
Operation of the fog lights depends on 
the exterior lighting selected, and an in-
dicator light will light up on the instru-
ment panel.
To avoid inconveniencing other road 
users, remember to switch off the rear 
fog light when it is no longer needed.
Switching off the lights
Turn ring 4 again until mark  5 is oppo-
site the symbol for the fog light you wish 
to switch off. The corresponding indi-
cator light goes out on the instrument 
panel.
The front and rear fog lights switch off 
when the exterior lights are switched 
off.
gFront fog lights
Turn centre ring 4  on the 
stalk  1 until the symbol faces mark  5, 
then release it.
Operation of the fog lights depends on 
the exterior lighting position selected, 
and an indicator light will light up on the 
instrument panel.
When driving in fog or snow, or 
when transporting objects which are 
higher than the roof, the headlights 
do not come on automatically.
Switching on the fog lights remains 
the responsibility of the driver: the 
indicator lights on the instrument 
panel inform you whether the fog 
lights are lit (indicator light on) or not 
(indicator light not on).
4
5
1  

1.79
éHazard warning lights 
Press switch 2.
This switch activates all four direction 
indicators and the side indicator lights 
simultaneously. It must only be used in 
an emergency to warn drivers of other 
vehicles that you have had to stop in 
an area where stopping is prohibited or 
unexpected, or that you are obliged to 
drive under special conditions.
Depending on the vehicle, the hazard 
warning lights may come on auto-
matically under heavy deceleration. 
You can switch them off by pressing 
switch 2 once.
Direction indicators
Move stalk 1  parallel to the steering 
wheel and in the direction you are going 
to turn it.
One-touch mode
When driving, it is possible that the 
steering wheel may not be turned suf-
ficiently to return the stalk automatically 
to its starting position.
In this case, move the stick 1  to half-
way, then release it: the stalk returns to 
its original point and the indicator light 
flashes three times.
Horn
Press steering wheel boss  A.
Headlight flasher
Pull stalk 1 towards you to flash the 
headlights.
AUDIBLE AND VISUAL SIGNALS
A
21   

1.80
HEADLIGHT BEAM ADJUSTMENT
On vehicles fitted with this function, 
control A allows you to adjust the height 
of the beams according to the load.
Turn control A downwards to lower the 
headlights and upwards to raise them.
A
If driving on the left in a left-hand 
drive vehicle (or vice versa), drivers 
must have the lights adjusted by an 
authorised dealer for the duration of 
the trip.
For manual settings
Examples of positions for adjusting control  A according to the load
0 Driver alone or with front 
passenger
1 Driver with one front 
passenger and two or three 
rear passengers
2 Driver with one front 
passenger, three rear 
passengers and luggage
2 Driver with luggage 
or (load) reaching the 
maximum permissible all-up 
weight
3 et 4 Do not use  

4.14
Respect local regulations about wash-
ing vehicles (e.g. do not wash your ve-
hicle on a public highway).
Observe the vehicle stopping distances 
when driving on gravelled surfaces to 
prevent paint damage.
Repair, or have repaired quickly, areas 
where the paint has been damaged, to 
prevent corrosion spreading.
Remember to visit the body shop pe-
riodically in order to maintain your 
anti-corrosion warranty. Refer to the 
Maintenance Document.
If it is necessary to clean mechani-
cal components, hinges, etc., spray 
them with products approved by our 
Technical Department to protect them 
after they have been cleaned.
BODYWORK MAINTENANCE (2/2)
We have selected special products 
to care for your vehicle and you can 
obtain these from the manufactur-
er’s accessory outlets.
Using a roller type car wash
Return the windscreen wiper stalk to 
the Park position (refer to the informa-
tion on the “Windscreen washer, wiper” 
in Section 1). Check the mounting of 
external accessories, additional lights 
and mirrors, and ensure that the wiper 
blades are secured with adhesive tape.
Remove the radio aerial mast if your 
vehicle is fitted with this equipment. 
Remember to remove the tape and refit 
the antenna after washing.
Cleaning the headlights
As the headlights are made of plastic 
“glass”, use a soft cloth or cotton wool 
to clean them. If this does not clean 
them properly, moisten the cloth with 
soapy water, then wipe clean with a soft 
damp cloth or cotton wool.
Finally, carefully dry off with a soft dry 
cloth.
Cleaning products  containing  alco-
hol must not  be used.
Vehicles with a matte paint 
finish
This type of paint requires certain pre-
cautions.
Do not do the following
–  use wax-based products (polishing);
–   rub hard;
–   wash the vehicle in a roller-type car 
wash;
–   wash the vehicle using a high-pres-
sure device;
–   attach stickers to the paintwork (risk 
of leaving marks).
You should do the following
Wash the vehicle by hand using plenty 
of water, using a soft cloth or a gentle 
sponge. 

5.1
Section 5: Practical advice
Puncture, emergency spare wheel  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . . . . . . . . .   5.2
Tyre inflation kit . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5.6
Tools  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5.9
Wheel trims - wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . . . . .   5.10
Changing a wheel  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . . . . . . . . . . . . . . . . . . . . . .   5.11
Tyres (tyre and wheel safety, use in winter)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . .   5.13
Headlights (changing bulbs)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . . . . . . . . . . . . . .   5.16
Rear lights and side lights (changing bulbs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . .   5.20
Indicator lights (changing bulbs)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . . . . . . . . . . .   5.23
Interior lighting (changing bulbs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . .   5.24
RENAULT card: battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . .   5.26
Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5.27
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5.32
Fitting a radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5.34
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5.35
Wipers (replacing blades)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . . . . . . . . . . . . . . . .   5.36
Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5.38
Operating faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5.40