2016 Ram 3500 Chassis Cab warning

[x] Cancel search: warning

Page 574 of 669

Ram 3500 Chassis Cab 2016  Owners Manual •Belt slips
• “Groove jumping (belt does not maintain correct
position on pulley)
• Belt broken (note: identify and correct problem before
new belt is installed)
• Noise (objectionable sque

Page 575 of 669

Ram 3500 Chassis Cab 2016  Owners Manual WARNING!(Continued)
•Battery gas is flammable and explosive. Keep
flame or sparks away from the battery. Do not use
a booster battery or any other booster source with
an output greater than 12 Volts

Page 576 of 669

Ram 3500 Chassis Cab 2016  Owners Manual WARNING!
•Use only refrigerants and compressor lubricants
approved by the manufacturer for your air condi-
tioning system. Some unapproved refrigerants are
flammable and can explode, injuring you. O

Page 582 of 669

Ram 3500 Chassis Cab 2016  Owners Manual Adding Washer Fluid
The fluid reservoir is located under the hood and should
be checked for fluid level at regular intervals. Fill the
reservoir with windshield washer solvent only (not ra-
diator ant

Page 583 of 669

Ram 3500 Chassis Cab 2016  Owners Manual Exhaust System
The best protection against carbon monoxide entry into
the vehicle body is a properly maintained engine exhaust
system.
If you notice a change in the sound of the exhaust system;
or if

Page 585 of 669

Ram 3500 Chassis Cab 2016  Owners Manual To minimize the possibility of catalytic converter dam-
age:
•Do not shut off the engine or interrupt the ignition,
when the transmission is in gear and the vehicle is in
motion.
• Do not try to s

Page 589 of 669

Ram 3500 Chassis Cab 2016  Owners Manual Cooling System Pressure Cap
The cap must be fully tightened to prevent loss of engine
coolant (antifreeze), and to ensure that the engine coolant
(antifreeze) will return to the radiator from the cool

Page 591 of 669

Ram 3500 Chassis Cab 2016  Owners Manual •If frequent engine coolant (antifreeze) additions are
required, the cooling system should be pressure tested
for leaks.
• Maintain engine coolant (antifreeze) concentration at a
minimum of 50% OA