2016 Peugeot 508 Hybrid check engine

31
6
Driving
508HY-comp _en_Chap06_conduite_ed01-2016
Electronic gearbox (ETG6)
Six-speed electronic gearbox which offers a choice between two operating modes: - automated mode for automatic control of the gears by the gearbox, - manual mode for sequential gear changing by the driver. In automated mode, it is possible to change gear manually by using the steering mounted control paddles as desired, when overtaking, for example.
R. Reverse  With your foot on the brake, lift the selector and move it for wards. N. Neutral.  With your foot on the brake, select this position to start. A. Automated mode.  Move the selector backwards to select this mode. M. Manual mode with sequential gear changing.  Lift the selector, then move it backwards to select this mode, then use the steering mounted control paddles to change gear.
G e a r s e l e c t o r
+. Change up paddle to the right of the steering wheel.  Press the back of the "+" steering mounted paddle to change up a gear. -. Change down paddle to the left of the steering wheel.  Press the back of the "-" steering mounted paddle to change down a gear.
Steering mounted control paddles
The steering mounted paddles cannot be used to select neutral or to engage or disengage reverse gear.
When immobilising the vehicle, with the HYbrid4 system active, you must place the gear selector in neutral N . Before carrying out any work in the engine compartment, check that the gear selector is in position N , that the
parking brake is applied and that the RE ADY lamp is off before switching off RE ADY lamp is off before switching off RE ADYthe HYbrid4 system.

35
7
Practical information
508HY-comp _en_Chap07_info-pratiques_ed01-2016
Car washing machine or tunnel
With the HYbrid4 system active, RE ADY lamp on, parking brake RE ADY lamp on, parking brake RE ADYreleased:  Place the gear selector in position N .  Switch off the engine (press the START/STOP button or with the vehicle's key if it does not have Keyless Entry and Starting). The parking brake is applied automatically and the RE ADY lamp goes off in the instrument panel. RE ADY lamp goes off in the instrument panel. RE ADY Switch on the ignition again (press the START/STOP button
or with the key in the intermediate position) without your foot on the brake pedal. The RE ADY lamp remains off. RE ADY lamp remains off. RE ADY Release the parking brake using the manual control on the centre console, while keeping your foot on the brake pedal.  Switch off the ignition (press the START/STOP button without your foot on the brake pedal, or using the key) after checking that the parking brake remains released.
With the HYbrid4 system active, RE ADY lamp on, parking brake RE ADY lamp on, parking brake RE ADYreleased:  Place the gear selector in position N ( AUTO m o d e).  Press the brake pedal then the ECO OFF button.
If the HDI Diesel engine was on standby, it then restarts. If the HDi Diesel engine is running, its operation is maintained without time limit.
Car washing machines or tunnels in which the HDi Diesel engine must be switched off. Car washing machines or tunnels in which the HDi Diesel engine must not be switched off.
Some car washing machines or tunnels (where the vehicle is moved for wards on a travelling track) require that the parking brake be "released" during the wash. If possible on your vehicle, deactivate the automatic operation of the electric parking brake via the vehicle equipment configuration menu.

42
In the event of a breakdown
508HY-comp _en_Chap08_en-cas-de-pannes_ed01-2016
R e f i t t i n g
To refit the battery, carry out the removal operations in reverse order and connect the positive (+) terminal last.
After refitting
 Check that the battery terminals are secure.  Switch on the ignition, without starting the engine.  Check that there are no error messages or warning lamps on. If there is any problem, contact a PEUGEOT dealer or a qualified
workshop to have the system reset.  Check the correct operation of all openings: doors, boot and windows.  After refitting, wait for about 2 minutes.  Start the engine.
 Check the correct operation of the anti-pinch systems: electric windows and panoramic sunroof.  Check the correct operation of the electric parking brake by releasing and applying it again.  Switch off the ignition.  Get out of the vehicle and check the operation of the remote control.  Set: the time, the radio preset stations and the audio settings.
After reconnecting the battery, certain functions may be temporarily
unavailable: air conditioning, navigation.
In all cases, if there is a problem, contact a PEUGEOT dealer or a
qualified workshop.