2016 Peugeot 308 buttons

12
Instrument panel
1. Fuel gauge.
2. An alogue speedometer (mph or km/h).
3.
eng

ine oil level indicator.
4.
gear

shift indicator.
gear

with an automatic gearbox.
5.
Di

gital speedometer (mph or km/h).
6.
Cr

uise control or speed limiter settings. A. Ma
in lighting dimmer.
B. Re set the trip distance recorder.
In

stantaneous information on:
-
ser

vicing,
-
rem

aining driving range with the
emissions additive.
7. Se
rvice indicator, then total distance
recorder (miles or km).
the

se functions are displayed in turn when
the ignition is switched on.
8.
tri

p distance recorder (miles or km).
9.
Re

v counter (x 1 000 rpm or tr/min),
graduation according to engine (petrol or
Diesel).
10.
engi

ne coolant temperature gauge.
Dials and screens Control buttons
Instruments

33
308_en_Chap01_instruments-de-bord_ed02-2015
Lighting dimmer control
For the manual adjustment of the brightness of
the instrument panel and the touch screen.
Instrument panel
With the exterior lighting on, press this button
to adjust the brightness of the dashboard
lighting, the touch screen and the mood
lighting. As soon as the lighting reaches the
required level of brightness, release the button.
Touch screen
F Press on the "Configuration" menu.
F Ad just the brightness (only on the touch
screen) by pressing on the " +" or " -" buttons.
Operates only when the vehicle's
exterior lighting is on.
1
Instruments

35
308_en_Chap01_instruments-de-bord_ed02-2015
tr i p c o m p u t e r
System that gives you information on the current journey (range, fuel consumption…).
Information display in the
touch screen
Permanent display:
F Select the "Driving assistance " menu.
the t

rip computer information is displayed in
the primary page of the menu.
F
Pr

ess one of the buttons to display the
desired tab.
the c
urrent fuel consumption tab
with:
-
th
e range,
-
th
e current fuel consumption,
-
th
e Stop & Start time counter.
the t

rip "1"
tab with:
-
th
e distance travelled.
- th e average fuel consumption,
- th e average speed,
fo

r the first trip.
the t

rip "2" tab with:
-
th

e distance travelled.
-
th

e average fuel consumption,
-
th

e average speed,
fo

r the second trip.
Trip reset
F When the desired trip is displayed, press
the reset button or on the end of the wiper
control stalk.
tr

i p s "1" and "2" are independent but their use
is identical.
For example, trip "1" can be used for daily
figures, and trip "2" for monthly figures.
the i

nformation is accessible in the "
Driving assistance" menu.
tem

porary display in a new window:
F
Pr

ess the end of the wiper control stalk for
access to the information and display the
different tabs.
Touch screen
1
Instruments

37
308_en_Chap01_instruments-de-bord_ed02-2015
touch screen
It gives access to:
- the heating/air conditioning controls,
-
me

nus for adjusting settings for vehicle
functions and systems,
-
au

dio and display configuration menus,
-
au

dio system and telephone controls and
the display of associated information.
For reasons of safety, the driver
should only carr y out operations
that require close attention, with the
vehicle stationary.
Some functions are not accessible
when driving.General operation
Recommendations
It is necessary to press firmly, particularly for
"flick" gestures (scrolling through lists, moving
the map...).
A light wipe is not enough.
the s
creen does not recognise pressing with
more than one finger.
thi

s technology allows use at all temperatures
and when wearing gloves.
Do not use pointed objects on the touch
screen.
Do not touch the touch screen with wet hands.
use

s a soft clean cloth to clean the touch
screen.
And, depending on equipment, it allows:
-
th

e display of alert messages and the
visual parking sensors information,
-
ac

cess to the controls for the navigation
system and Internet services, and the
display of associated information.
State of indicator lamps
Some buttons contain an indicator lamp that
gives the state of the corresponding function.
gre

en indicator: you have switched on the
corresponding function.
Orange indicator: you have switched off the
corresponding function.
1
Instruments

38
use this button to go to the
s econdary page.
use t

his button to return to the
primary page.
use t

his button for access to
additional information and to the
settings for certain functions.
use t

his button to confirm.
use t

his button to quit.
Principles
use the buttons on either side of the touch
s creen for access to the menus, then press the
virtual buttons in the touch screen.
eac

h menu is displayed over one or two pages
(primary page and secondary page).
After a few moments with no action on
the secondary page, the primary page
is displayed automatically. Air conditioning
.
Allows adjustment of the various
settings for temperature, air flow...
See the sections on "Heating",
"Manual air conditioning" and "Digital
air conditioning".
Touch screen menus
Driving assistance .
Allows certain functions to be switched
on and off and their settings adjusted. Telephone
.
See the "Audio equipment and telematics" section.Media.See the "Audio equipment and telematics" section.
Navigation .
Depending on trim level, navigation can
be not available, an option or standard.
See the "Audio equipment and
telematics" section. Configuration
.
Allows configuration of the display
and the system.
Connected services .
these services can be not available, an option or
s tandard.
See the "Audio equipment and telematics" section.
1. Volume / m ute.See the "Audio equipment and telematics" section.
Instruments

45
308_en_Chap01_instruments-de-bord_ed02-2015
For more information on the
Multimedia menu, refer to the "Audio
and telematics" section.
Screen C
F Press the MENU b utton for access to the
main menu . F
Pr

ess the "
7" or " 8" button to select the
Personalisation-configuration menu,
then confirm by pressing the " OK" button.
F
Pr
ess the "
5" or " 6" and " 7" or " 8" buttons
to set the date and time, then confirm by
pressing the " OK" button.
F
Pr
ess the "
5" or " 6" button to select the
Display configuration menu then confirm
by pressing the the " OK" button.
1
Instruments

46
F Press the "MENU" b utton to gain access
to the main menu , then press the "5"
or
" 6 " b

uttons to go to the Display
settings menu.
F
Pr

ess the "OK" button to select the menu
required. F
On

ce you have selected a setting, press
the " 7" or " 8" buttons to change its value.
You have access to the following settings:
- ye
ar,
-
m

onth,
-
d

ay,
-
h

o u r,
-
m

inutes,
-
12 o

r 24 hour mode.
Screen A
F Press the " 5" o r "6 " buttons to switch
respectively to the previous or next setting.
F
Pr

ess the "OK" button to register the
change and return to the normal display or
press the "
<]" button to cancel.
Instruments

47
308_en_Chap01_instruments-de-bord_ed02-2015
Screen A (without audio system)
F Once you have selected a setting using
the "5 " o
r "6 " buttons, press the "OK"
button to change its value.
F
Wa

it for approximately ten seconds without
any action to allow the change to be
registered or press the "ESC" button to
cancel.
the s

creen then returns to the normal display.
1
Instruments