2016 PEUGEOT 2008 bulb

.
2008_en_Chap00a_sommaire_ed01-2016
General safety recommendations 134
Direction indicators
1

35
Hazard warning lamps
1

35
H or n
13

6
Emergency or assistance call

1
36
Under-inflation detection
1

37
ESC system

1
40
Grip control

1
43
Active City Brake

1
45
Front seat belts
1

49
Airbags


152
Safety
Fuel tank 1 70
Misfuel prevention (Diesel) 1 72
Running out of fuel (Diesel)

1
74
AdBlue
® and SCR system
(BlueHDi Diesel) 1 75
Temporary puncture repair kit
1

83
Changing a wheel
1

94
Snow chains

2
01
Changing a bulb
2

02
Changing a fuse
2

08
12 V battery

2
14
Changing a wiper blade
2

20
To w i n g


2 2 1
Towing a trailer

2
23
Towbar with quickly detachable towball

2
25
Fitting roof bars

2
30
Advice on care and maintenance
2

30
Accessories
2

31
Practical information
Bonnet 234
Petrol engines 2 35
Diesel engines
2

36
Checking levels

2
37
Checks
240
Checks
General information 2 42
Petrol engines 2 43
Petrol weights

2
45
Diesel engines

2
47
Diesel weights
2

49
Dimensions


252
Identification markings
2

53
Technical data
Emergency call 254
Assistance call 2 55
7-inch touch screen

2
57
Audio system / Bluetooth

3
27
Audio system

3
47
Audio equipment and telematics
Alphabetical index
Carrying children 1 56
Deactivating the passenger's front airbag 1 58
ISOFIX child seats

1
65
Child lock

1
69
Child safety
Lighting 1 17
Headlamp adjustment 1 24
Cornering lighting
1

25
Wiper controls
1

26
Lighting dimmer

1
30
Courtesy lamps

1
31
Interior mood lighting
1

32
Panoramic glazed sunroof

1
33
Visibility
Contents

4
2008_en_Chap00b_vue-ensemble_ed01-2016
Exterior
Remote control key 43 - 47
- locking/unlocking
the vehicle
-

l
ocating the vehicle
-
gu

ide-me-home lighting
-
a

nti-theft protection
-


alarm
-


battery
Starting - Switching off the engine

8
0 - 81 Boot


50
-
ope

ning / closing
-
em

ergency release
Temporary puncture repair kit
1

83-193
W iper s


126 -129
Changing a wiper blade
1

29, 219
Changing bulbs
2

06-207
-
r

ear lamps
-
3
rd brake lamp
-
n
umber plate lamps
-


foglamp
-
r

eversing lamp
Fuel tank, misfuel p r eve nt i o n
17

0 -173
Panoramic glazed sunroof

1

33
Roof bars

2

30
Accessories


231-232
Electronic stability programme (ESC)

1

40 -142
Snow chains

2

01
Ty r e pressures
1

86, 193, 253
Changing a wheel
1

94-200
-

tools
-

r

emoving / refitting
Lighting
1

17-123
LED lamps


121
Daytime running lamps
1

21
Headlamp beam adjustment
1

24
Cornering lighting
1

25
Changing bulbs
2

02-205
-

f

ront lamps
-


foglamps
-
d

irection indicator repeaters
Door mirrors
6
0
Doors

48 - 49
-
ope

ning / closing
-
em

ergency control
Locking/unlocking from the inside

5

1
Alarm


52-53
Electric windows

5

4-55 P a r k i n g s e n s o r s
11

0 -111
Reversing camera
1
12
P a r k A s s i s t
11
3 -11 6
Towbar

223-229
Towing

221-222
Over view

10
2008_en_Chap00b_vue-ensemble_ed01-2016
Maintenance - Technical data
Identification markings 253
Dimensions 252
Changing bulbs
2

02-207
-

front
-

rear Running out of fuel, Diesel

1

74
Opening the bonnet

2

34
Under the bonnet, petrol

2

35
Under the bonnet, Diesel

2

36
Petrol engines

2

43 -244
Diesel engines

2

47-248 12V batter y
21

4 -218
Load reduction, energy economy mode
2
19
Engine compartment fuses
2
08 -209, 213
Petrol weights
2
45 -246
Diesel weights
2
49-251
AdBlue
® and SCR system
(BlueHDi Diesel) 1 75 -182
Checking levels
23

7-239
-

oil
-

b

rake fluid
-


coolant
-

s

creenwash fluid
-

a

dditive (Diesel with particle filter)
Checking components
2

40-241
-


battery
-
a

ir / passenger compartment filter
-

o

il filter
-

p

article filter (Diesel)
-

b

rake pads / discs
Over view

134
2008_en_Chap07_securite_ed01-2016
General safety recommendations
Labels are applied at various
points on your vehicle. They carry
safety warnings as well as vehicle
identification information. Do not
remove them: they form an integral part
of your vehicle.We draw your attention to
the following points:
- The fitting of electrical equipment or accessories not listed by
PEUGEOT
may cause faults and
failures with the electrical system of
your vehicle. Contact a PEUGEOT
dealer for information on the range
of recommended accessories.
-

A
s a safety measure, access to
the diagnostic socket, used for
the vehicle's electronic systems,
is reserved strictly for PEUGEOT
dealers or qualified workshops,
equipped with the special tools
required (risk of malfunctions of the
vehicle's electronic systems that
could cause breakdowns or serious
accidents). The manufacturer
cannot be held responsible if this
advice is not followed.
-
A

ny modification or adaptation
not intended or authorised by
Automobiles PEUGEOT or
carried out without meeting the
technical requirements defined
by the manufacturer would lead
to the suspension of the legal and
contractual warranties.
Installation of accessory
radio communication
transmitters
Before installing a radio communication
transmitter, you must contact a
PEUGEOT dealer for the specification
of transmitters which can be fitted
(frequency, maximum power,
aerial position, specific installation
requirements), in line with the Vehicle
Electromagnetic Compatibility Directive
(2004/104/EC).
Depending on the legislation in force in
the country, certain safety equipment
may be compulsory: high visibility
safety vests, warning triangles,
breathalyzers, spare bulbs, spare fuses,
fire extinguisher, first aid kit, mud flaps
at the rear of the vehicle.
The fitting of electrical equipment
or accessories which are not
recommended by PEUGEOT may result
in a failure of your vehicle's electronic
system and excessive electrical
consumption.
Contact a PEUGEOT dealer
for information on the range of
recommended equipment and
accessories.
For any work on your vehicle, use
a qualified workshop that has the
technical information, skills and
equipment required, all of which a
PEUGEOT dealer is able to provide.
Safety

202
2008_en_Chap09_info-pratiques_ed01-2016
Changing a bulb
Front lamps
In some weather conditions (e.g. low
temperature or humidity), the presence
of misting on the internal sur face of the
glass of the headlamps and rear lamps
is normal; it disappears after the lamps
have been on for a few minutes.
The headlamps have polycarbonate
lenses with a protective coating:
F

d

o not clean them using a dr y
or abrasive cloth, nor with a
detergent or solvent product,
F

u

se a sponge and soapy water or a
pH neutral product,
F

w

hen using a high pressure washer
on persistent marks, do not keep
the lance directed towards the
lamps or their edges for too long,
so as not to damage their protective
coating and seals.
1. D
aytime running lamps / sidelamps
(light -emitting diodes - LEDs).
2.
D

ipped beam headlamps (H7-55W).
3.
D

irection indicators (PWY-24W).
4.
M

ain beam headlamps (H7-55W).
5.
F

ront foglamps (with "cornering
lighting" function according to version)
(PSX-24W).
Changing a bulb should only be done
after the headlamp has been switched
off for several minutes (risk of serious
burns).
F

D

o not touch the bulb directly with
your fingers, use a lint-free cloth.
It is imperative to use only anti-
ultraviolet (UV) type bulbs to avoid
damaging the headlamp.
Always replace a failed bulb with a
new bulb with the same type and
specification.
Practical information

203
2008_en_Chap09_info-pratiques_ed01-2016
Changing dipped beam headlamp
bulbs
F Remove the protective cover by pulling on the tab.
F

D
isconnect the bulb connector.
F

S
pread the spring to release the bulb.
F

E
xtract the bulb and change it.
Amber coloured bulbs, such as the
direction indicators, must be replaced
with bulbs of identical specifications
and colour.
When refitting, close the protective
cover carefully to preserve the sealing
of the headlamp.
Rapid flashing of the direction indicator
warning lamp (right or left) indicates the
failure of a bulb on that side.
Changing direction indicator
bulbs
To reassemble, carry out these operations in
reverse order, positioning the alignment lug at
the bottom.
F

T

urn the bulb holder an eighth of a turn
anti-clockwise and extract it.
F

R

emove the bulb and change it.
To reassemble, carry out these operations in
reverse order.
9
Practical information

204
2008_en_Chap09_info-pratiques_ed01-2016
Changing main beam headlamp bulbsDaytime running lamps /
sidelamps (light-emitting
diodes - LEDs)
For the replacement of this type of LED lamp,
contact a PEUGEOT dealer or a qualified
workshop.
To reassemble, carry out these operations in
reverse order, positioning the alignment lug at
the bottom.
F

R

emove the protective cover by pulling on
the tab.
F
D
isconnect the bulb connector.
F

P

ull out the bulb and replace it.
Practical information

205
2008_en_Chap09_info-pratiques_ed01-2016
Changing front foglamp /
directional lamps
F Access to the front foglamp is through the orifice below the bumper.
F

D
isconnect the bulb holder connector by
pressing on the top of the tongue.
F

E
xtract the bulb holder by pressing on the
two clips clips (top and bottom).
F

R
eplace the module.
To reassemble, carry out these operations in
reverse order.
Changing integrated direction
indicator side repeater bulbs
F Press the central tongue and remove the side repeater.
F

P
ull the bulb holder out and replace the
failed bulb.
To reassemble, carry out these operations in
reverse order.
You should contact a PEUGEOT dealer or a
qualified workshop for the replacement of these
bulbs.
F
I
nsert a flat screwdriver between the mirror
glass and its base.
F

U

se the screwdriver as a lever to extract
the mirror glass.
F

U

nclip the mirror shell by pressing on the
two retaining clips.
To obtain this module, contact a
PEUGEOT dealer or a qualified workshop.
You can also contact a PEUGEOT
dealer or a qualified workshop for this
replacement.
9
Practical information