2016 NISSAN X-TRAIL start stop button


> (GLW    0RGHO 7$@
Stop/Start (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T o change thestatus, warnings orturn onoroff any of
the systems/warnings displayedinthe ªStop/Startº
menu, usethe
switch
*
1
to select andthe
ENTER
*
1
to change amenu item:
. Display
Ð Stop/Start displayON/OFF
. Trip CO2 saving
The ªTrip CO2 savingº andengine stoptimemode
shows theCO2 saving andengine stoptimesince
the last reset. TheCO2 saving andengine stop
time canbereset bypushing theENTER
*
1
(T ype A)or
*
2
(T ype B).
. Total CO2 saving
The ªTotal CO2 savingº andengine stoptime
mode shows:
Ð The estimated CO2exhaust emissions pre-
vented.
Ð The engine stoptimethattheengine hasbeen
stopped bythe ªStop/Start orIdling Stopº
System.
NO TE:
The ªTotal CO2 savingº andengine stoptime
values cannot bereset andshow accumu-
lated ªStop/Start orIdling StopºSystem
information sincethevehicle wasbuilt.
ECO Drive Report (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Display:
This setting allowsthecustomer toenable/disable the
ECO Drive Report inthe vehicle information display.
1. Use the
switch
*
1
to select ªECODrive
Reportº . 2.
Press theENTER
*
1
to turn ON/OFF theECO
management displayinthe vehicle information
display .
View History:
This setting allowsthecustomer toreset thepast
history ofthe fuel economy andthebest fueleconomy .
Welcome Effect:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Y ou can choose whether ornot todisplay thewelcome
screen whentheignition switchisplaced inthe ªACCº
or ªONº position. You can also choose thefollowing
items todefine howthewelcome screenlooks:
. Dial andPointer
. Display Effect
Select ªWelcome Effectsº usingthe
switch
*
1
and press theENTER
*
1
to select thismenu. Usethe
switch
*
1
to navigate between themenu options
and press theENTER
*
1
to turn each function ON/
OFF .
V ehicle Settings
GUID-41BC 8E41-F48A-4F7F-9C6 C-781FDBBDDD1D
The vehicle settings allowsthecustomer tochange
settings forthe following settings.
. Lighting
. Turn Indicator
. Unlocking
. Wipers
The vehicle settings canbechanged usingthe
*
1
, and theENTER
*
1
switches.
Lighting:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The ªLightingº menuhasthefollowing options:
. Welcome Light
The welcome lightingcanbeset tobe ON orOFF .
From theªLightingº menu,selectªWelcome
Lightº .Use theENTER
*
1
to turn thisfeature ON
orOFF .
. Int.Lamp Timer
The internal lighttimer canbeset tobe ON or
OFF .From theªLightingº menu,selectªInt.Lamp
Timerº .Use theENTER
*
1
to turn thisfeature ON
or OFF .
. Auto Lights
The sensitivity ofthe automatic lightingcanbe
adjusted. FromtheªLightingº menu,selectªAuto
Lightsº .Use the
switch
*
1
and theENTER
*
1
to select therequired sensitivity .The following
options areavailable:
Ð On Earliest
Ð On Earlier
Ð Standard
Ð On Later
. Headlight Offdelay (ifequipped)
The duration ofthe automatic headlights canbe
changed from0to 180 seconds. Fromthe
ªLightingº menu,selectªHeadlight Offdelayº .
Use theENTER
*
1
to change theduration.
T urn Indicator:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The ª3Flash Onºovertaking featurecanbeset tobe
ON orOFF .From theªTurn Indicatorº menu,selectª3
Flash Onº.Use theENTER
*
1
to turn thisfeature ON
or OFF .
Unlocking:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
There arethefollowing optionsinthe ªUnlockingº
menu:
. I±KeyDoor Lock
When thisitem isturned on,the request switchon
the door isactivated. FromtheªUnlockingº menu,
select ªI-KeyDoor Lockº.Use theENTER button
to activate ordeactivate thisfunction.
Instrume ntsand controls
2-23
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-16
Pre-driving checksandadjustments
TROUBLESHOO TINGGUIDE
T32A1308 27-D271D 359-A932-46 DB-8333-9B39CD617627
Symptom Possible cause Action
totake
When pushing theignition switchtostop
the engine The
Shift toPark warning appears onthe
vehicle information displayandtheinside
warning chimesounds continuously or
for afew seconds. (Continuously Variable
T ransmission models) The
shift lever isnot inthe ªPº (Park)
position. Shift
theshift lever tothe ªPº (Park)
position.
When opening thedriver's doortoget
out ofthe vehicle The
inside warning chimesounds con-
tinuously . The
ignition switchisin the ªOFFº
position. Close
thedoor securely .
When closing thedoor aftergetting out
of the vehicle The
Key System Faultwarning inthe
meter blinks inyellow ,the outside chime
sounds 3times andtheinside warning
chime sounds forafew seconds. The
ignition switchisin the ªONº
position. Place
theignition switchinthe ªOFFº
position.
The Shift toPark warning appears onthe
vehicle information displayandtheout-
side chime sounds continuously .(Con-
tinuously Variable Transmission models)The
ignition switchisin the ªOFFº
position andtheshift lever isnot inthe
ªPº (Park) position. Move
theshift lever tothe ªPº (Park)
position andplace theignition switchin
the ªOFFº position.
When pushing therequest switchorthe
ªL OCKº
button onthe Intelligent
K ey tolock thedoor The
outside chimesounds forafew
seconds andallthe doors unlock. The
Intelligent Key isinside thevehicle. Carry
theIntelligent Key with you.
When closing thedoor withtheinside
lock knob turned toªLOCKº The
outside chimesounds forafew
seconds andallthe doors unlock. The
Intelligent Key isinside thevehicle or
luggage room. Carry
theIntelligent Key with you.
When pushing thedoor handle request
switch tolock thedoor The
outside chimesounds forafew
seconds. The
Intelligent Key isinside thevehicle or
luggage room. Carry
theIntelligent Key with you.
A door isnot closed securely . Close
thedoor securely .
The door handle request switchis
pushed beforethedoor isclosed. Push
thedoor handle request switchafter
the door isclosed.
When pushing theignition switchtostart
the engine The
Key System Faultwarning inthe
meter blinks ingreen. The
battery charge islow . Replace
thebattery withanew one. (See
ªBatteryº (P.8-20) .)
The Key System Faultwarning inthe
meter blinks inyellow andtheinside
warning chimesounds forafew seconds. The
Intelligent Key isnot inthe vehicle. Carry
theIntelligent Key with you.
When pushing theignition switch The
Key System Faultwarning inthe
meter illuminates inyellow . It
warns ofamalfunction withthe
electrical steeringlocksystem orthe
Intelligent Key system. Contact
aNISSAN dealer.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
switch onthe ultrasonic sensor.
It is possible toexclude theultrasonic (forexample,
when leaving petsinside thecar ortransporting the
vehicle onaferry) .
T o exclude theultrasonic:
1. Close allthe windows.
2. Place theignition switchinthe ªOFFº position.
3. Push thecancel switch
*
B
located onthe ceiling.
The security indicator lightwillstart flashing
rapidly .
4. Close thedoors, hoodandback door. Lockthem
using theremote controller, theIntelligent Key or
the request switch.Thesecurity indicator lightwill
start flashing fasterandabuzzer willsound once.
The ultrasonic sensorisnow excluded fromthetheft
warning system.Allother functions ofthe system
remain activated untilthetheft warning systemis
disarmed again.
For models without ultrasonic sensor
GUID-F6 883F2C-1 8CE-4385-9B AC-D9C25E45F1E2
How toactivate system:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Close allwindows andsunroof (ifequipped) .
The system canbearmed evenifthe
windows areopen.
2. Place theignition switchinthe ªOFFº position.
3. Remove remotecontroller orthe Intelligent Key
from thevehicle.
4. Close alldoors, hoodandback door. Lockall
doors. Thedoors canbelocked withremote
controller orthe Intelligent Key ,door handle
request switch,powerdoorlockswitch or
mechanical key. 5.
Confirm thatthesecurity indicator lightcomes on.
The security indicator lightstays onfor about 30
seconds. Thevehicle security systemisnow pre-
armed. Afterabout 30seconds thevehicle
security systemautomatically shiftsintothearmed
phase. Thesecurity lightbegins toflash once
every approximately 3seconds. If,during this30
seconds pre-armtimeperiod, thedoor isun-
locked, orthe ignition switchisplaced inªONº ,
the system willnot alarm.
Even when thedriver and/or passengers arein
the vehicle, thesystem willactivate withall
doors, hood,andback doorlocked withthe
ignition switchinthe ªLOCKº position. When
placing theignition switchinthe ªONº position,
the system willbereleased.
Theft warning systemoperation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The vehicle security systemwillgive thefollowing
alarm:
. The hazard indicator orheadlight blinksandthe
horn sounds intermittently .
. The alarm automatically turnsoffafter approxi-
mately 30or50 seconds. However, thealarm
reactivates ifthe vehicle istampered withagain.
The alarm isactivated by:
. Unlocking thedoor oropening theback door
without usingthebutton onthe remote controller
or the Intelligent Key ,the door handle request
switch orthe mechanical key.(Even ifthe door is
opened byreleasing thedoor inside lockknob, the
alarm willactivate.)
. Opening thehood. How
tostop alarm:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
. The alarm willstop onlybyunlocking adoor by
pushing theªUNL OCKº button onthe remote
controller orthe Intelligent Key .
. The alarm willnotstop ifthe ignition switchis
placed inthe ªONº position.
NISSAN ANTI-THEFT SYSTEM (NATS)
GUID-5E4 37D07-076 E-4181-8CCF -57AFFB80C485
The NISSAN Anti-Theft System (NATS) willnotallow
the engine tostart without theuse ofthe registered
NA TS key.
If the engine doesnotstart using theregistered NATS
key ,it may bedue tointerference causedby:
. Another NATS key.
. Automated tollroad device.
. Automated paymentdevice.
. Other devices thattransmit similarsignals.
Start theengine usingthefollowing procedure:
1. Remove anyitems thatmay becausing the
interference awayfromtheNATS key.
2. Leave theignition switchinthe ªONº position for
approximately 5seconds.
3. Place theignition switchinthe ªOFFº orªLOCKº
position, andwait approximately 10seconds.
4. Repeat steps2and 3again.
5. Start theengine.
6. Repeat thesteps above untilallpossible inter-
ferences areeliminated.
If this procedure allowstheengine tostart, NISSAN
recommends placingtheregistered NATS key sepa-
rate from other devices toavoid interference.
Pre-driving checksandadjustments
3-21
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-26
Pre-driving checksandadjustments
formed foracertain periodoftime. Inthis
case, waitforawhile andthen perform the
operation.
P ower close
GUID-CC B3E1AA-F7F C-4580-824E-AE894FFC0FC5
When theback doorisfully opened, theback doorwill
fully close automatically by:
. pushing thepower backdoorswitch
*
A
on the
instrument panel
. pushing thepower backdoorswitch
*
D
on the
lower partofthe back door
. pushing thepower backdoorbutton
*
C
on the
key formore than1second
The hazard flashes 4times andtheoutside chime
sounds whentheback doorstarts closing.
Reverse function
GUID-E38 E5684-FF75 -4567-AC95-7492FB18 146B
The power backdoorwillreverse immediately ifone of
the following actionsisperformed duringpoweropen
or power close.
. pushing thepower backdoorswitch
*
A
on the
instrument panel
. pushing thepower backdoorswitch
*
D
on the
lower partofthe back door
. pushing thepower backdoorbutton
*
C
on the key.
The outside chimesounds whentheback doorstarts
to reverse.
Auto reverse function
GUID-98CB 1259-07F7-4 E7C-9EB2-D4EF10F4 F969
The auto-reverse functionenablestheback doorto
automatically reversewhensomething iscaught inthe
back doorasitis opening orclosing. Whenthecontrol
unit detects anobstacle, theback doorwillreverse and
return tothe fullopen orfull close position.
If asecond obstacle isdetected, theback doormotion
will stop. Theback doorwillenter themanual mode.
A pinch sensor ismounted oneach sideofthe back
door. Ifan obstacle isdetected bythe pinch sensor
during powerclose,theback doorwillreverse and
return tothe fullopen position immediately .
NO TE:
If the pinch sensor isdamaged orremoved, the
power closefunction willnotoperate.
WARNING:
There isasmall distance immediately beforethe
closed position thatcannot bedetected. Make
sure thatallpassengers keeptheirhands, etc.,
clear fromtheback dooropening beforeclosing
the back door.
Manual mode
GUID-FD58C3 34-881E-4F97-9CD8-8548D2267CDB
If power operation isnot available, theback doorcan
be operated manually.Power operation maynotbe
available ifmultiple obstacles havebeen detected ina
single power cycleorifthe battery voltage islow .
When thepower backdoormain switch isin the OFF
position, theback doorcanbeopened manually by
pushing theback dooropener switch.Ifthe power
back dooropener switchispushed duringpoweropen
or close, thepower operation willbecanceled andthe
back doorcanbeoperated manually.
AUT OCL OSURE (ifequipped)
GUID-5E1 D548E-B20 5-4D0F-BE11-4BC09 228D416
If the back doorispulled downtoapartly open
position, theback doorwillpull itself tothe closed
position.
Do not apply excessive forcewhen theauto
closure isoperating. Excessiveforceapplied
may cause themechanism tomalfunction.
CAUTION:
. The back doorwillautomatically closefrom
a partly openposition. To avoid pinching,
keep hands andfingers awayfromback
door opening.
. Donot letchildren operatetheback door.
BACK DOOR RELEASE LEVER
GUID-4A1 D87BC-BEAC-4 21F-8B76-F15FD5B474 D5
JVP0280X
If the back doorcannot beopened withthepower door
lock switch duetoadischarged battery,follow these
steps.
1. Fold therear seats down. SeeªSeatsº (P.1-2) .
2. Insert asuitable toolinthe access opening. Move
the release levertothe right. Theback doorwillbe
unlatched.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
4-18
Display screen,heaterandaircondition er,and audio system
Parallel parking operation
GUID-F5 F18295-2B4 D-4783-9CE4 -840B910 D1FBF
JVH0835X
*
1
Starting thesystem:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVH1013X
. Drive forward atreduced speed.
. Push theCAMERA button,andtouch
on the
display .
NO TE:
. Atavehicle speedover30km/h (19MPH) ,
the system willclose andthedisplay will
disappear.
. Ifthe bird's-eye viewisnot displayed onthe
front passenger sideofthe screen, pushthe
CAMERA buttonuntilthebird's-eye viewis
displayed.
. Atavehicle speedover10km/h (6MPH) ,the
camera viewwillnotdisplay.
. Parallel parkingmodeisselected bydefault.
*
2
Finding aparking space:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVH1014X
. Slowly movethevehicle forward, andthesystem
will search foraparking space.
. The system willindicate thataparking spacehas
been found.
NO TE:
. Use theturn signal switch toselect the
preferred sideforparking.
. The system cannotdetectaparking space
that isnot bordered byobjects suchas
vehicles.
*
3
Moving thevehicle forward:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Slowly movethevehicle forward furthertothe position
for backing up,and then stop thevehicle completely .
The system willprovide guidance usingchime,
indicating thatthevehicle hasreached theproper
position forstarting theautomatic steeringoperation.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
4-20
Display screen,heaterandaircondition er,and audio system
*
1
:
T ouch thiskeytoactivate thePA system.
*
2
T arget parking rectangle (blue):
Indicates thetarget parking position.
*
3
:
The green PA icon indicates thatthePA is
operating.
*
4
Cancel:
T ouch thiskeytocancel thePA operation.
*
5
Start:
T ouch thiskeytostart thePA operation.
*
6
:
T ouch thiskeytoselect theparallel mode.
*
7
:
T ouch thiskeytoadjust thelocation ofthe target
parking rectangle.
*
8
Clearance guidelines(red):
Indicates anapproximate spacerequired for
parking.
*
9
Reverse startingposition rectangle (green):
Indicates aposition atwhich tomake aturn in
reverse.
*
1 0
:
Indicates thatanautomated steeringcontrolis
operating.
Perpendicular parkingoperation
GUID-090 7D067-571 1-4540-ADEB -3869CB21 D193
JVH0840X
*
1
Starting thesystem andselecting parking
mode:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Stop thevehicle nearthespace where youwish to
park.
2. Push theCAMERA buttonandtouch
on the
display .
JVH1013X
NO TE:
If the bird's-eye viewisnot displayed onthe
front passenger sideofthe screen, pushthe
CAMERA buttonuntilthebird's-eye viewis
displayed.
3. Touch
to select theperpendicular parking
mode.
JVH1024X
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
4-28
Display screen,heaterandaircondition er,and audio system
MANUAL AIRCONDITIONER ANDHEATER (Type A)
T32A1308 27-FC419F2 9-59C8-4324-B0B6-C96 1B2FBC0DF
JVH0664X
1. ªA/Cº button/Fan speedcontrol ª
º dial
2. Airflow control buttons
3. ªMAX A/Cºbutton/T emperature controldial
4. Front defogger
ª
º button
5. Rear defogger
ª
º button (SeeªDefogger
switchº (P.2-49) .)
6. Airrecirculation
ª
º button
For models withStop/Start SystemorIdling Stop
System:
The Stop/Start SystemorIdling StopSystem willnot
activate whenthefront defogger isturned on.
Controls
T32A130 827-429D5 75F-97C2-4 BE3-AA18-DE7034F213 4F
T urning system on/off:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T o turn onthe system, turnthefanspeed control
ª
º dial outofthe OFF position. Turn thedial
counterclockwise tothe OFF position toturn offthe
system. Fan
speed control:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T urn thefanspeed control ª
º dial clockwise to
increase thefanspeed.
T urn thefanspeed control ª
º dial counterclock -
wise todecrease thefanspeed.
T emperature control:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T urn thetemperature controldialtoset the desired
temperature. Turn thedial between themiddle andthe
right position toselect thehot temperature. Turn the
dial between themiddle andtheleftposition toselect
the cool temperature. Air
flow control:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push oneofthe airflow control buttons toselect theair
flow outlets.
Ð Airflows mainly fromcenter andside
ventilators.
Ð Airflows mainly fromcenter andside
ventilators andfoot
outlets.
Ð Airflows mainly fromthefoot outlet and
partly fromthe
defogger.
Ð Airflows mainly fromthedefogger andfoot
outlets.
Outside aircirculation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push theairrecirculation ª
º button. (Theindicator
light willturn off.)Theairflow isdrawn fromoutside the
vehicle.
Select theoutside aircirculation modefornormal
heating orair conditioning operation.
Air recirculation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push theairrecirculation ª
º button on.(The
indicator lightwillilluminate.)
The airwill recirculate insidethevehicle.
A/C (AirConditioner) operation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push theªA/Cº button toturn onoroff the air
conditioner. Whentheairconditioner ison, the ªA/Cº
indicator lightonthe button illuminates.
MAX A/C(Quick AirConditioning) operation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push theªMAX A/Cºbutton forquick cooling and
dehumidifying.
When theMAX A/Cmode isturned on,the airflow
mode indicator willturn offwith theairflow mode fixed
at ª
º .
At the same time,theindicator lightonthe ªA/Cº
button andtheairrecirculation modewillturn on.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
4-30
Display screen,heaterandaircondition er,and audio system
5. Turn thetemperature controldialtothe desired
position between themiddle andthehot (right)
position.
Dehumidified defogging:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This mode isused todefog thewindows and
dehumidify theair.
1. Push theairrecirculation ª
º button. (The
indicator lightwillturn off.)
2. Push thefront defogger ª
º button. (The
indicator lightonthe front defogger ª
º button
will turn on.)
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe desired
position.
MANUAL AIRCONDITIONER ANDHEATER (Type B)
GUID-28D6F 171-7D3A-45 18-A42A-FF5C4C8E7D1 1
JVH0827X
1. Fanspeed control ª
º dial
2. Front defogger ª
MAXº button
3. ªA/Cº button
4. Airrecirculation ª
º button
5. Rear window defogger ª
º button (See
ªDefogger switchº(P.2-49) .)
6. Temperature controldial
7. Airflow control buttons
For models withStop/Start SystemorIdling Stop
System:
The Stop/Start SystemorIdling StopSystem willnot
activate whenthefront defogger isturned on.
Controls
GUID-73F40 F20-B1C0-426E-9749 -0BB63E8A0 C57
T urning system on/off:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T o turn onthe system, turnthefanspeed control
ª
º dial outofthe OFF position. Turn thedial
counterclockwise tothe OFF position toturn offthe
system. Fan
speed control:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T urn thefanspeed control ª
º dial clockwise to
increase thefanspeed.
T urn thefanspeed control ª
º dial counterclock -
wise todecrease thefanspeed.
T emperature control:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T urn thetemperature controldialtoset the desired
temperature. Turn thedial between themiddle andthe
right position toselect thehot temperature. Turn the
dial between themiddle andtheleftposition toselect
the cool temperature.
&RQGLWLRQ
([FHSWIRU&KLQD