2016 NISSAN JUKE display


> (GLW    0RGHO )' @
4-4Heater, air conditioner, audio and phone systems
When you use this system, make sure the
engine is running.
If you use the system with the engine not
running (ignition ON or ACC) for a long
time, it will discharge the battery, and the
engine will not start.
Reference symbols:
ªExampleº Ð Words marked in quotes refer to a
key shown only on the display. These keys can
be selected by touching the screen.
HOW TO USE TOUCH SCREENGUID-7CCFD255-7CCA-4FE0-A64E-C9A30213AA2F
CAUTION
.The glass screen on the liquid
crystal display may break if it is hit
with a hard or sharp object. If the
glass screen breaks, do not touch it.
Doing so could result in an injury.
. To clean the display, never use a
rough cloth, alcohol, benzine, thin-
ner or any kind of solvent or paper
towel with a chemical cleaning
agent. They will scratch or deterio-
rate the panel.
. Do not splash any liquid such as
water or car fragrance on the dis-
play. Contact with liquid will cause the system to malfunction.
To help ensure safe driving, some functions
cannot be operated while driving.
The on-screen functions that are not available
while driving will be ªgrayed outº or muted.
Park the vehicle in a safe location and then
operate the navigation system.
WARNING
. ALWAYS give your full attention to
driving.
. Avoid using vehicle features that
could distract you. If distracted,
you could lose control of your
vehicle and cause an accident.JVH1248X
Touch screen operationGUID-F45BCBA5-784B-4464-9407-86458F60C9EB
Selecting the item:GUID-F83C168B-173D-4313-B631-F712588C0463Touch an item to select. To select the ªAudioº
key, touch the ªAudioº key
*1on the screen.
Adjusting the item:
GUID-F83C168B-173D-4313-B631-F712588C0463Touch the ª+º key or the ª


> (GLW    0RGHO )' @
.123/ABC:
Changes the keyboard between numbers
and alphabets.
. Space:
Inserts a space.
. Delete:
Deletes the last inputted character with one
touch. Touch and hold the ªDeleteº key to
delete all of the characters.
. OK:
Completes the character input.
Touch screen maintenanceGUID-77C3133A-9596-4196-B911-A0948F0FFCA3If you clean the display screen, use a dry, soft
cloth. If additional cleaning is necessary, use a
small amount of neutral detergent with a soft
cloth. Never spray the screen with water or
detergent. Dampen the cloth first and then wipe
the screen.
HOW TO USE THE BACK BUTTONGUID-A5D1F746-2A2E-4A3C-BC32-793B3C61BD05Push the BACK button to return to the previous
screen.
JVH0735X
HOW TO USE THE APPS´I BUTTONGUID-EE87C90E-709A-44F4-A0A2-03BFBA7B5D5EFor information about the ªSiriusXM Travel Linkº,
and ªSiriusXM Trafficº features, see the separate
Navigation System Owner's Manual.
For information about the ªMy Appsº key, see
ªNissanConnect
SMApp smartphone integrationº
(P.4-75) .
For information about the ªVoice Commandsº
key, see ªNISSAN Voice Recognition System
(models with navigation system)º (P.4-96).
JVH1249X
To select and/or adjust several functions,
features and modes that are available for your
vehicle:
1. Push the
button.
2. Touch the ªSettingsº key.
3. Touch the desired item.
Heater, air conditioner, audio and phone systems4-5
&RQGLWLRQ


> (GLW    0RGHO )' @
ColorAdjust touch-screen color.
Temperature Unit Touch this key to change the temperature unit being displayed (Fahrenheit or Celsius) .
Touchscreen click Toggles the touch-screen click feature on or off. When activated a click sound will be heard every time a key on
the screen is touched.
System Beeps Toggle the system beep tones feature on or off. When activated, a beep sound will be heard when a pop-up
message appears on the screen or a button on the unit (such as the
button) is pushed and held for 2
seconds.
Return to Factory Settings / Clear Memory Touch this key to return all settings to default and to clear the memory.
Software Licenses Touch this key to display software licensing information.
Traffic Touch this key to display traffic settings. See the separate Navigation System Owner's Manual for more
information.
SXM Touch this key to display SXM status information. For SXM setup, see ªFM-AM-SAT radio with Compact Disc
(CD) player (Type B)º (P.4-62) .
Heater, air conditioner, audio and phone systems4-7
&RQGLWLRQ


> (GLW    0RGHO )' @
4-8Heater, air conditioner, audio and phone systems
HOW TO USE BRIGHTNESS CON-
TROL BUTTON
GUID-82D32811-A50D-4D51-9384-8B20106BD16ATo change the display brightness, push the
button. Pushing the button again will change the
display to the day or the night display.
If no operation is performed, the display will
return to the previous display.
Push and hold the
button to turn the display
off. Push the button again to turn the display on.
HOW TO USE THE ON´OFF BUTTON/
VOLUME CONTROL KNOB
GUID-D692787F-E163-4A05-A783-F4654D74489FPush the ON´OFF button to turn audio function
on and off. Turn the volume control knob to
adjust audio volume.
HOW TO USE THE CAMERA BUTTONGUID-716100D9-D1B9-46BF-AA2A-F670AD2BDE88For more information regarding the CAMERA
button, see ªAround View


> (GLW    0RGHO )' @
JVH1219X
To display the rear view, the RearView Monitor
system uses a camera located just above the
vehicle's license plate
*1.
REARVIEW MONITOR SYSTEM OP-
ERATION
GUID-6D91C4EA-6F91-4864-8872-367E41A22325With the ignition switch in the ON position,
move the shift lever to the ªRº (Reverse) position
to operate the RearView Monitor.
SAA2776
HOW TO READ THE DISPLAYED
LINES
GUID-D20F3487-0821-4A93-857D-7074E42B5DCEGuiding lines which indicate the vehicle width
and distances to objects with reference to the
bumper line
*Aare displayed on the monitor.
Distance guide lines:
Indicate distances from the bumper.
. Red line
*1: approx. 1.5 ft (0.5 m)
. Yellow line
*2: approx. 3 ft (1 m)
. Green line
*3: approx. 7 ft (2 m)
. Green line
*4: approx. 10 ft (3 m)
Vehicle width guide lines
*5:
Indicate the vehicle width when backing up.
Difference between predictive and actual
distances
GUID-B0CBD45C-C473-4E14-9E08-0ADAA810B264The displayed guidelines and their locations on
the ground are for approximate reference only.
Objects on uphill or downhill surfaces or
projecting objects will be actually located at
distances different from those displayed in the
monitor relative to the guidelines (refer to
illustrations) . When in doubt, turn around and
view the objects as you are backing up, or park
and exit the vehicle to view the positioning of
objects behind the vehicle.
Heater, air conditioner, audio and phone systems4-9
&RQGLWLRQ


> (GLW    0RGHO )' @
4-10Heater, air conditioner, audio and phone systems
JVH1159X
Backing up on a steep uphill:GUID-F83C168B-173D-4313-B631-F712588C0463When backing up the vehicle up a hill, the
distance guide lines and the vehicle width guide
lines are shown closer than the actual distance.
Note that any object on the hill is farther than it
appears on the monitor.
JVH1160X
Backing up on a steep downhill:GUID-F83C168B-173D-4313-B631-F712588C0463When backing up the vehicle down a hill, the
distance guide lines and the vehicle width guide
lines are shown farther than the actual distance.
Note that any object on the hill is closer than it
appears on the monitor.
SAA3440
Backing up near a projecting object:GUID-F83C168B-173D-4313-B631-F712588C0463The vehicle may seem to nearly clear the object
in the display. However, the vehicle may hit the
object if it projects over the actual backing up
course.
&RQGLWLRQ


> (GLW    0RGHO )' @
SAA3475
Backing up behind a projecting object:GUID-F83C168B-173D-4313-B631-F712588C0463The position*Cis shown farther than the
position
*Bin the display. However, the
position
*Cis actually at the same distance
as the position
*A. The vehicle may hit the
object when backing up to the position
*Aif
the object projects over the actual backing up course.
ADJUSTING THE SCREENGUID-54416AD3-192F-4BD6-9F2D-D870FB593E1B1. Push the ENTER/SETTING button while the
RearView monitor screen is displayed.
2. Adjust the brightness using the
TUNE´FOLDER or TUNE´SCROLL control
knob.
3. Push the ENTER/SETTING button and
adjust the contrast using the TUNE´FOLDER
or TUNE´SCROLL control knob.
4. Push the ENTER/SETTING button to return to the RearView monitor screen.
NOTE:
Do not adjust any of the display settings of
the RearView Monitor while the vehicle is
moving. Make sure the parking brake is
firmly applied.
REARVIEW MONITOR SYSTEM LIM-
ITATIONS
GUID-EFFF2C63-07DF-4C45-BC34-87E0A099AC03
WARNING
Listed below are the system limitations
for RearView Monitor. Failure to oper-
ate the vehicle in accordance with these
system limitations could result in ser-
ious injury or death. .
The system cannot completely elim-
inate blind spots and may not show
every object.
. Underneath the bumper and the
corner areas of the bumper cannot
be viewed on the RearView Monitor
because of its monitoring range
limitation. The system will not show
small objects below the bumper,
and may not show objects close to
the bumper or on the ground.
. Objects viewed in the RearView
Monitor differ from actual distance
because a wide-angle lens is used.
. Objects in the RearView Monitor
will appear visually opposite com-
pared to when viewed in the rear
view and outside mirrors.
. Use the displayed lines as a refer-
ence. The lines are highly affected
by the number of occupants, fuel
level, vehicle position, road condi-
tions and road grade.
. Make sure that the lift gate is
securely closed when backing up.
. Do not put anything on the rearview
camera. The rearview camera is
installed above the license plate.
Heater, air conditioner, audio and phone systems4-11
&RQGLWLRQ


> (GLW    0RGHO )' @
4-12Heater, air conditioner, audio and phone systems
.When washing the vehicle with
high-pressure water, be sure not to
spray it around the camera. Other-
wise, water may enter the camera
unit causing water condensation on
the lens, a malfunction, fire or an
electric shock.
. Do not strike the camera. It is a
precision instrument. Otherwise, it
may malfunction or cause damage
resulting in a fire or an electric
shock.
The following are operating limitations and do
not represent a system malfunction:
. When the temperature is extremely high or
low, the screen may not clearly display
objects.
. When strong light is directly coming on the
camera, objects may not be displayed
clearly.
. Vertical lines may be seen in objects on the
screen. This is due to strong reflected light
from the bumper.
. The screen may flicker under fluorescent
light.
. The colors of objects on the RearView
Monitor may differ somewhat from the actual
color of objects. .
Objects on the monitor may not be clear in a
dark environment.
. If dirt, rain or snow accumulates on the
camera, the RearView Monitor may not
display objects clearly. Clean the camera.
. Do not use wax on the camera window.
Wipe off any wax with a clean cloth
dampened with mild detergent diluted with
water.
JVH1219X
SYSTEM MAINTENANCEGUID-A02CC587-5E86-43E2-BA3D-983BBBDAD052
CAUTION
.Do not use alcohol, benzine or
thinner to clean the camera. This
will cause discoloration. To clean
the camera, wipe with a cloth dam-
pened with diluted mild cleaning
agent and then wipe with a dry
cloth.
. Do not damage the camera as the
monitor screen may be adversely
affected.
&RQGLWLRQ