2016 MITSUBISHI OUTLANDER PHEV seats

Mass groupSize classFixture
Vehicle ISOFIX positionsRecommended
Child Restraint
Systems *2UN-R44 Appro-
val No.
Front passengerRear out-boardActivated air- bagDeactivated
Airbag *10+ - Up to 13 kg
CISO/R3XXIL
G 0/1 S (Child re-
straint system for East area):
MZ314390E
G 0/1 S (Child re- straint system for Central-South area):
MZ314390CS
G 0/1 S (Child re- straint system for North area):
MZ314390N
RWF ISOFIX
BASE (Rearward facing ISOFIXbase for ALL
area): MZ314417
E4-04443718
Child restraint
5-20OGGE16E1Seats and seat belts5

Mass groupSize classFixture
Vehicle ISOFIX positionsRecommended
Child Restraint
Systems *2UN-R44 Appro-
val No.
Front passengerRear out-boardActivated air- bagDeactivated
Airbag *1I - 9 to 18 kg
DISO/R2XXIL
G 0/1 S (Child re-
straint system for East area):
MZ314390E
G 0/1 S (Child re- straint system for Central-South area):
MZ314390CS
G 0/1 S (Child re- straint system for North area):
MZ314390N
RWF ISOFIX
BASE (Rearward facing ISOFIXbase for ALL
area): MZ314417
E4-04443718
Child restraint
5-21OGGE16E1Seats and seat belts5

Mass groupSize classFixture
Vehicle ISOFIX positionsRecommended
Child Restraint
Systems *2UN-R44 Appro-
val No.
Front passengerRear out-boardActivated air- bagDeactivated
Airbag *1I - 9 to 18 kg
CISO/R3XXIL
G 0/1 S (Child re-
straint system for East area):
MZ314390E
G 0/1 S (Child re- straint system for Central-South area):
MZ314390CS
G 0/1 S (Child re- straint system for North area):
MZ314390N
RWF ISOFIX
BASE (Rearward facing ISOFIXbase for ALL
area): MZ314417
E4-04443718
I - 9 to 18 kgBISO/F2XIUFIUF——B1ISO/F2XXIUF, ILIUF, ILDUO plus:
MZ313045E1-04301133AISO/F3XIUFIUF——II - 15 to 25 kg XILILKIDFIX:
MZ314804E1-04301198III - 22 to 36 kg XILIL
Child restraint
5-22OGGE16E1Seats and seat belts5

*1:With front passenger’s airbag deactivated by means of front passenger’s airbag ON-OFF switch.*2:MITSUBISHI MOTORS Europe B.V. reserves the right to changes without any prior announcement.
For detailed information, consult your MITSUBISHI MOTORS Authorized Service Point.CAUTIONl When installing a child restraint system, remove the head restraint from the seat.
l When installing a child restraint system on the rear outboard seat, adjust the seatback angle to 4 steps forward from the most reclined position.
l A rearward facing child restraint system of R2/R3 is not recommended for front passenger seat because driver’s visibility is obstructed.Definition of characters the above table:
l
IUF- Suitable for ISOFIX forward child restraint systems of universal category approved for use in the mass group.
l IL- Suitable for particular ISOFIX child restraint systems of the categories for “specific vehicles”, “restricted”, or “semi-universal”, ap-
proved for this type of vehicle.
l X- ISOFIX position not suitable for ISOFIX child restraint systems in this mass group.

Suitability for various seating positions
E00406802722Mass group
Seating position
Recommended Child Restraint Systems *2UN-R44 Approval
No.
Front passenger
Rear outboardRear centreActivated airbagDeactivated Air-
bag*10 - Up to 10 kgXUUX——0+ - Up to 13 kgXU, LU, LXBABY-SAFE plus:
MZ314393E1-04301146I - 9 to 18 kgXU, LU, LXDUO plus:
MZ313045E1-04301133
Child restraint
5-23OGGE16E1Seats and seat belts5

Mass group
Seating position
Recommended ChildRestraint Systems *2UN-R44 Approval
No.
Front passenger
Rear outboardRear centreActivated airbagDeactivated Air-
bag*1I - 9 to 18 kg
XU, LU, LX
G 0/1 S (Child re-
straint system for East area): MZ314390EG 0/1 S (Child re-straint system for
Central-South area): MZ314390CS
G 0/1 S (Child re- straint system for North area):
MZ314390N
E4-03443416
II - 15 to 25 kgXU, LU, LXKID plus: MZ314250 KIDFIX: MZ314804E1-04301169
E1-04301198III - 22 to 36 kgXU, LU, LX*1 :With front passenger’s airbag deactivated by means of front passenger’s airbag ON-OFF switch*2:MITSUBISHI MOTORS Europe B.V. reserves the right to changes without any prior announcement.
For detailed information, consult your MITSUBISHI MOTORS Authorized Service Point.CAUTIONl When installing a child restraint system, remove the head restraint from the seat.
l When installing a child restraint system on the front passenger seat, adjust the front seatback angle to 2 steps rearward from the first locking position.
Child restraint
5-24OGGE16E1Seats and seat belts5

Definition of characters the above table:
lU- Suitable for “universal” category restraints approved for use in this mass group.
l L- Suitable for particular child restraint systems. See the above table of “Recommended Child Restraint Systems”.
l X- Seat position not suitable for children in this mass group.

Child restraint
5-25OGGE16E1Seats and seat belts5

Installing a child restraint sys-tem to the lower anchorage (ISOFIX child restraint mount-ings) and tether anchorage
E00406901944
Lower anchorage location
Your vehicle’s front passenger seat and rear seat is fitted with lower anchorages for at-
taching a child restraint system with ISOFIX mountings.
Tether anchorage location
Your vehicle has 3 child restraint anchoragepoints on the backside of the front passenger seat and rear seats. These are for securing a
child restraint system tether strap to each of the 3 seating positions in your vehicle.
WARNINGl Child restraint anchorages are designed
to withstand only those loads imposed by
correctly fitted child restraints. Under no circumstances are they to be used for adult seat belts, harnesses, or for attach-
ing other items or equipment to the vehi- cle.
Child restraint system with
ISOFIX mountings
The child restraint system is designed only
for seats that incorporate lower anchorages.
Retain the child restraint system using the lower anchorages.
It is not necessary to retain the child restraint
system using the vehicle’s seat belts.
A- Child restraint system connectors
Child restraint
5-26OGGE16E1Seats and seat belts5Front passenger seat
Rear seat Front passenger seat Rear seat

To install
1.Remove any foreign material in or
around the connectors and ensure the ve-
hicle seat belt is in its normal storage po-
sition.
2. Remove the head restraint from the loca-
tion in which you wish to install a child
restraint.
Refer to “Head restraints” on page 5-05.
3. When installing a child restraint system
in the front passenger seat, adjust seat
slide to its most rearward position.
4. Push the child restraint system’s connec-
tors (A) into the lower anchorages (B) in accordance with the instructions provi-
ded by the child restraint system’s man-
ufacturer.
For easier access to the rear seat lower
anchorage, the rear seatback may be re- cline rearward. After it is security fas-
tened, adjust the seatback to 4 steps for- ward from most reclined position.
A- Connector B- Lower anchorage
C- Vehicle seat cushion
D- Vehicle seatback
If your child restraint system has a sup- port leg, make sure that there is a sup-
port leg at the stable position on the floor. If your child restraint system re-
quires the use of a tether strap, fasten the
tether strap in accordance with step 5.
5. Latch the tether strap hook (E) of the
child restraint system to the tether an-
chorage bar (F) and tighten the top tether strap hook so it is securely fastened.NOTEl If it is difficult to latch the tether strap hook
in the rear seat, turn the hook sideways.
6. Push and pull the child restraint system
in all directions to be sure it is secure.
Child restraint
5-27OGGE16E1Seats and seat belts5 Front passenger seat
Rear seat