2016 MITSUBISHI LANCER lights

Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)5-30
Features and controls
5
N0051550
0141
Press
the
remote
control
transmitter
buttons
to
lock
or
unlock
the
doors
and
to
open
the
trunk
lid.
It can
also
help
you
signal
for
attention
by
setting
off the
panic
alarm.
N0054420
0036
Press
the
LOCK
button
(1)
to
lock
all
the
doors. The turn signal lights will also blink once.
N005443
01135
Press
the
UNLOCK
button
(2)
to
unlock
the
driver
’s door
only
. Within
about
2 seconds,
press
the
UNLOCK
button
one
more
time
to
unlock all the doors.The
dome
light
will
turn
on
for
30
seconds.
The turn signal lights will also blink twice.The
front
side-marker
and
parking
lights
will
also turn on for about 30 seconds. Refer to “W
elcome light” on page 5-131.
N0054440
0012
Press
the
trunk
button
(3)
twice
within
about
5 seconds
and
the
trunk
lid
will
be
opened.
The
trunk
lid
must
be
closed
manually
after
it
has
been
opened.
N0054450
1065
Setting
of
the
horn,
turn
signal
lights
and
buzzer
of
the
keyless
entry
system
answer
-
back
function
can
be
changed
as
required.
This
is done
with
the
key
removed
from
the
ignition switch.The
horn
answerback
function
can
be
set
to
the
following
three
conditions.
Each
time
the
horn
answerback
function
is
set,
a chime
will
sound
to tell
you
the
condi-
tion of the answerback function.
Keyless entry system

1-
LOCK (
) button
2-
UNLOCK (
) button
3-
Trunk (
) butto
n
4-
PANIC (
) button
5-
Indicator light
To lock the doors

NOTE
If
you
press
the
LOCK button (1) twice
quickly
, the horn will sound once.
To unlock the doors

NOTE
The
door
unlock
function
can
be
set
so
that
all
doors
unl
ock
whe
n the UNL
OCK butto
n
(2) is pre
ssed once.
Ref
er to “Settin
g of doo
r
unlock function
” on pa
ge 5-3
1.
To open the trunk lid

Answerback
function

NOTE
The answe
rback
function
doe
s not
ope
rate
whe
n the key is in the ignition
switch
or any
door
is opened.
Horn deactivation/r
eactivation
Number
of
chimes
Condition
One chime
The horn will not sound.
Two chimes
The horn w
ill s
ound.
Four chimes
The horn will sound if the LOCK button is pressed twi
ce qui
ckly.

Free-hand Advanced Security Transmit
ter (F.A.S.T.-key) (if so equipped)
Features and controls
5-31
5
1.Turn
the
ignition
switch
to
the
“LOCK”
position.
If you
started
the
engine
with
the
key
, remove
the
key
from
the
ignition
switch.2.Open
the
driver
’s door
and
turn
the
com-
bination
headlights
and
dimmer
switch
to
the “OFF” position.3.Press
the
LOCK
button
(1)
for
4 to 10
sec-
onds
and
press
the
UNLOCK
button
(2)
during this time.4.Release
in
sequence
the
UNLOCK
and
LOCK
buttons
within
10
seconds
of
pressing the UNLOCK button in step 3.
The
turn
signal
lights
answerback
function
can be set to the following seven conditions.Each
time
the
turn
signal
lights
answerback
function
is set,
a chime
will
sound
to tell
you
the condition of the answerback function.
1.Turn
the
ignition
switch
to
the
“LOCK”
position.
If you
started
the
engine
with
the
key
, remove
the
key
from
the
ignition
switch.2.Open
the
driver
’s door
and
turn
the
com-
bination
headlights
and
dimmer
switch
to
the “OFF” position.3.Press
the UNLOCK
button
(2)
for
4 to 10
seconds
and
press
the
LOCK
button
(1)
during this time.4.Release
in
sequence
the
UNLOCK
and
LOCK
buttons
within
10
seconds
of
pressing the LOCK button in step 3.
The
buzzer
answerback
function
can
be
turned ON or OFF as required.
N005446
01112
The
door
unlock
function
can
be
set
to the
following two conditions.
Each
time
the
door
unlock
function
is set,
a
chime
will
sound
to tell you
the
condition
of
the door unlock function.1.Turn
the
ignition
switch
to
the
“LOCK”
position.
If you
started
the
engine
with
the
key
, remove
the
key
from
the
ignition
switch.2.Open
the
driver
’s door
and
turn
the
com-
bination
headlights
and
dimmer
switch
to
the “OFF” position.3.Press
the
LOCK
button
(1)
for
4 to 10
sec-
onds
and
press
the
UNLOCK
button
(2)
during this time.4.Release
in
sequence
the
LOCK
and
UNLO
CK
buttons
within
10
seconds
of
pressing the LOCK button in step 3.
N00544700
015
If you
are
near
your
vehicle
and
feel
threat-
ened,
you
can
activate
the
alarm
to call
atten-
tion as follows:1.Press
the
PANIC
button
(4)
for
more
than
1 s
econd.
Changing
the
setting
of
the
turn
signal
lights answerback functionNumber of chimes
Condition
To lock
To un
lock
One chime
One flash
Two flashes
Two chimes
One flash
No flash
Three chimes
No flash
Two flashes
Four chimes
Two flashes
One flash
Five chime
s
No flash
One flash
Six chime
s
Two flashes
No flash
Seve
n
chimes
No flash
No flash
Buzzer deactivation/r
eactivation
Setting of door unlock function

Number of chimes
Condition
To lock
To un
lock
Number
of
chimes
Condition
One chim
e
All doors unlock
Two chime
s
Driver
’s door unlock only
Using the panic alarm

Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)5-32
Features and controls
5
2.The
headlights
will
blink
on
and
off and
the
horn
will
sound
intermittently
for
about
3 minutes.
3.To turn
off the
alarm,
press
any
button
on
the remote control transmitte
r.
N0056130
0029
Only
a F.A.S.T
.-key
, which
has
been
pro-
grammed
into
the
vehicle’
s electronics,
can
lock
and
unlock
all
the
doors,
and
start
the
engine. If you
los
e the
F.A.S.T.-key
, you
can
order
a
F.A.S.T
.-key
from
your
authorized
Mitsubishi
Motors dealer by referring to the key number
.
To prevent
vehicle
theft,
the
ID
codes
for
all
the
F.A.S.T
.-keys
except
the
one
for
the
lost
F.A.S.T
.-key must be programmed again.
Take
your
vehicle
and
all
the
remaining
F.A.S.T
.-keys
to
your
authorized
Mitsubishi
Motors
dealer
to
have
your
ID
codes
pro-
grammed again.
N0056140
0020
To add
a F.A.S.T
.-key
, you
must
already
have
two registered F
.A.S.T
.-keys.
Registering
the
ID
code
can
be
done
by
your
authorized
Mitsubishi
Motors
dealer
. Or
it
can
be
done
by
yourself
(except
for
vehicles
sold
in
Canada).
For
you
to
register
the
ID
code
yourself,
follow
the
“Customer
F.A.S.T
.-key
programming”
procedure
below
.
If you
choose
to
have
your
authorized
Mit-
subishi
Motors
dealer
register
the
ID
code,
take
your
vehicle
and
all remaining
F.A.S.
T.-
keys
to
your
authorized
Mitsubishi
Motors
deale
r.
N00561
501116
You
can
program
new
F.A.S.T
.-keys
to
the
system
if you
have
two
valid
(already
regis-
tered)
F.A.S.T
.-keys,
blank
(not
registered)
F.A.S.T
.-key
and
emer
gency
key
(specially
cut
for
your
vehicle
at
your
Mitsubishi
Motors dealer).To use
the
new
F.A.S.T
.-key
, it is necessary
to
register
the
key
with
both
the
electronic
immobilizer and keyless entry system.Also
refer
to
“Electronic
immobilizer:
Cus-
tomer
F.A.S.T
.-key
programming”
on
page
5-28. For
F.A.S.T
.-key
programming,
follow
the
procedures below
.
1.Remove
the
eme
rgency
key
from
the
F.A.S.T
.-key
. Refer
to
“Eme
rgency
key”
on page 5-22.2.While
pushing
the
lock
release
buttons
(A),
remove
the
cover
of
the
ignition
switch.3.Insert
the
emer
gency
key
into
the
ignition
switch.4.Insert
the
valid
F.A.S.T
.-key
into
the
emer
gency key
.
Replacement
F.A.S.T
.-keys

Additional
F.A.S.T
.-keys

NOTE
You
are
provided
with
two
F.A.S.T
.-keys,
but
you may register up to four F
.A.S.T
.-keys.
Customer F
.A.S.T
.-key pr
ogram-
ming (Except for vehicles sold in Canada)

Inside emergency trunk lid release 5-40 Features and controls
5
Pull the trunk lid downward as illustrated. Gently slam the trunk lid from the outside sothat it is completely closed. Always ensure the trunk lid is securely closed.
N00509800165
The emergency trunk lid release is designed to provide a way to open the trunk lid frominside the trunk. It was developed to help pre- vent death and serious injuries to children who might become locked inside a vehicletrunk. The emergency trunk lid release lever (see illustration) is mounted on the trunk lid. The lever glows in the dark after exposure to sunlight. You and your family should familiarize your- selves with the location and operation of the emergency trunk lid release lever. Childrenshould be taught not to play in or around vehicles.
NOTE
 The trunk area light comes on when the trunk lid is opened, and goes out when it is closed.  The trunk area light remains illuminated for a certain period and then goes off automati-cally. Refer to “Interior light auto-cutout function (dome light and other lights)” on page 5-169.
To close
CAUTION Be careful to prevent catching anyone’s fin- gers when closing the trunk lid.
 Before starting the vehicle, be sure to con- firm that the trunk lid is closed. If the trunk lid opens while driving the vehicle, objects stored in the trunk could fall out onto the road.NOTE
 Gas struts (A) are installed in the locations illustrated to support the trunk lid. Please observe the following in order to prevent damage or faulty operation. • Do not touch, push or pull the gas struts when closing the trunk lid. • Do not attach any plastic material, tape, etc., to the gas struts. • Do not tie string, etc., around the gas struts. • Do not hang any object on the gas struts.CAUTION
Inside emergency trunk lid release
BK0230300US.bo
ok 40 ページ ２０１５年７月３０日　木曜日　午後８時３８分

Theft-alarm system 5-42 Features and controls
5
4. The system has entered the armed stage after about 20 seconds, when the theft- alarm indicator (A) flashing becomes slower.The theft-alarm indicator (A) continues to flash while the system is in the armed stage.
N00510401197
The alarm will be activated if any of the fol-lowing occur while the vehicle is parked andthe system is armed.
 One of the doors is opened without using the remote control transmitter or the F. A . S . T. - k e y.  The engine hood or the trunk lid is opened.
When the alarm is activated: 1. The headlights blink on and off for 3 min- utes.After 3 minutes the headlights automati- cally shut off. 2. The horn will sound intermittently for 3minutes.
Ty p e 1 Ty p e 2 The alarm can be deactivated in the following ways.
NOTE
 If the engine hood or the trunk lid is open, the theft-alarm indicator (A) illuminates and the system cannot enter the armed stage. The system enters the armed stage about 20 sec-onds after the engine hood or the trunk lid is closed.  The system will be disarmed if, while the theft-alarm indicator (A) is illuminated, all doors are unlocked by remote control trans-mitter or the F.A.S.T.-key.  The system will be disarmed if, while the theft-alarm indicator is illuminated, the igni- tion switch is turned to the “ON” position.  The system will not be
armed if a door or the
trunk lid or the engine hood is not com- pletely closed. If this happens, rearm the sys-tem as described above.
Alarm stage
Type of alarm Horn sounds!Headlights blink on and off!
NOTE
 The alarm will continue to operate for 3 min- utes. At the end of that period, the alarm will automatically shut off to save battery power. The system will then
be rearmed until the
proper disarming step is taken.  The alarm will resume if unauthorized actions are taken again, even if the alarm hasstopped.  While the alarm is operating, a warning is displayed on the information screen in the multi-information display.
Alarm deactivation
BK0230300US.bo
ok 42 ページ ２０１５年７月３０日　木曜日　午後８時３８分

Power windows
Features and controls 5-43
5
 By using the remote control transmitter or the F.A.S.T.-key to lock or unlock the door.  Turn the ignition switch to the “ON” posi- tion.
N00510501169
The system will be disarmed if the followingoperation is performed.  The ignition switch is turned to the “ON” position.  All doors are unlocked by the remote con- trol transmitter or the F.A.S.T.-key.
N00510601128
Use the following procedure to test the sys-tem: 1. Lower the driver’s window. 2. Arm the system as explained in “Armed stage”. 3. Make sure that the theft-alarm indicatorcomes on and flashes for approximately 20 seconds. 4. Wait a few seconds and then unlock thedriver’s side door by using the inside door lock knob and open the door. 5. Check to be sure that the horn soundsintermittently and the headlights blink on and off when a door is opened. 6. Disarm the system by unlocking all doorsby the remote control transmitter or the F. A . S . T. - k e y.
N00510800367
Disarmed stage
NOTE
 If the UNLOCK button is pressed when all doors are closed and no door is openedwithin approximately 30 seconds, re-arming will automatically occur.Disarm...by remote control transmitter or F. A . S . T. - k e y
 The amount of time after unlocking until the vehicle relocks automatically can be adjusted. See an authorized Mitsubishi Motors dealer for details.  Once the system has been disarmed, it can- not be rearmed except by repeating the arm- ing procedure.
Testing the theft-alarm system
NOTE
Power windows 1- Open (down) 2- Close (up)
NOTE
 Never try to operate the main switch and sub switch in different directions at the sametime. This will freeze the window in posi- tion.  Operating the power windows repeatedly with the engine stopped will run down the battery. Use the window switches only whilethe engine is running. WA R N I N G Before operating the power windows, make sure that nothing can be trapped(head, hands, fingers, etc.) in the window.
BK0230300US.bo
ok 43 ページ ２０１５年７月３０日　木曜日　午後８時３８分

Inside day/night rearview mirror 5-50 Features and controls
5
N00548601080
Adjust the inside rear
view mirror only after
making any seat adjustme
nts so as to have a
clear view to the rear of the vehicle. Adjust the inside mirror to maximize the view through the rear window.
It is possible to move
the mirror up and down
to adjust its position. It is possible to move the mirror up/down and left/right to adjust its position.
The day/night knob (A) at the bottom of the mirror can be used to adjust the mirror toreduce the glare from the headlights of vehi-cles behind you during night driving.
Inside day/night rearview mirror
WA R N I N G Do not attempt to adjust the inside rear- view mirror while driving. This can be dangerous.Be sure to adjust the mirror before driv- ing.Type 1 Type 2
To adjust the vertical mirror position To adjust the mirror position
To reduce the glare Ty p e 1
BK0230300US.bo
ok 50 ページ ２０１５年７月３０日　木曜日　午後８時３８分

Outside rearview mirrors
Features and controls 5-51
5
When the headlights of the vehicles behind you are very bright, the reflection factor ofthe rearview mirror is automatically changed to reduce the glare. Normally, use the automatic mode. When the ignition switch is turned to the “ON” posi-tion, the reflection fact
or of the mirror is
automatically changed.
N00512201245
Adjust the outside rearview mirrors only after making any seat adjustments so you have aclear view to the rear of the vehicle.
1- Daytime position 2- Night position
Ty p e 2
NOTE
 Do not hang items on, or spray glass cleaner on the sensor (1), as reduced sensitivitycould result.
Outside rearview mirrors
WA R N I N G Do not attempt to adjust the outside rear- view mirrors while driving. This can be dangerous.Be sure to adjust the mirrors before driv- ing. Your passenger’s side mirror is convex. The objects you see in the mirror will look smaller and farther away than theyappear in a regular flat mirror. Do not use this mirror to estimate the dis- tance of vehicles following you whenchanging lanes.
BK0230300US.bo
ok 51 ページ ２０１５年７月３０日　木曜日　午後８時３８分