Handling of compact discs Comfort controls 7-25
7
N00734100340
 Use only the type of compact discs that have the mark shown in the illustration below. (Playback of CD-R or CD-RW discs may cause problems.)  
 The use of special shaped, damaged com- pact discs (like cracked discs) or low- quality compact discs (like warped discsor burrs on the discs)  
such as those shown 
will damage the CD player.
Error display
Problem
Item
Repair 
NO DISC No disc inserted Disc is 
 not in CD player. Insert disc. 
CHECK DISC Focus error 
Disc is not loaded correctly, or condensation on  disc. 
Insert disc with label facing up. Remove moisture from disc. 
DISC ERROR Disc error 
Disc is dirty, scratched, 
 or deformed; or exces- 
sive vehicle vibration. 
Clean or replace disc.  
Retry when vibrations  
stop. 
INTERNAL E Mechanism error 
Loading or eject error. Pick-up is out of posi- tion. 
Eject disc and reload. If di 
sc will not eject, bring  
your vehicle to a certified i-MiEV dealer. 
HEAT ERROR 
Inside of audio system is  hot. 
Internal protection agai 
nst high temperatures. 
Allow radio to cool  
by waiting about 30 min- 
utes. 
ERROR DC DC offset output voltage Foreign materi 
al is inside of radio or amplifier. Bri
ng your vehicle to a certified i-MiEV deale
r. 
ERROR 
Communication or power  supply error 
Communication error betw 
een external device  
and equipment. Power supply error of external  device. 
Bring your vehicle to a certified i-MiEV dealer.
Handling of compact discs 
BK0220401US.book  25 ページ  2015年6月3日 水曜日 午前7時42分 
         
        
        General information about your radio 7-28 Comfort controls
7
4. When the time is set, press the clock but- ton to stop the clock display from flash-ing.
N00733900439
Your vehicle’s radio receives both AM andFM stations. The quality of your reception is affected by distance, obstacles, an 
d signal interference. 
This radio complies with Part 15 of Federal Communications Commission (FCC) Rules (for vehicles sold in U.S.A.). Operation is subject to the following conditions:  The device may not cause harmful inter- ference.  This device must ac
cept any interference 
recieved, including interference that maycause undesirable operation. 
FM signals do not follow the earth surface nor are they reflected by the upper atmo-sphere. For this reason, 
 FM broadcasts cannot 
be received over long distances. AM signals follow the earth’s surface and are reflected bythe upper atmosphere. For this reason, AM broadcasts can be received over longer dis- tances. 
Because of the limite 
d range of FM signals 
and the way FM waves transmit, you may experience weak or fading FM reception.When the broadcast is blocked by mountains or similar obstructions,  
reception ca
n be dis- 
turbed. The reason why one can hear FM but not AM in parking garages, unde 
r bridges etc., is that 
FM signals, unlike AM  
signals, are reflected 
by solid objects such 
 as buildings, etc. 
Because FM signals are easily reflected by buildings, this can also 
 cause reception dis- 
turbances.The direct signal from  
the broadcast station 
reaches the antenna slightly before the reflected signal. This 
 time difference may 
cause some reception di 
sturbance or flutter. 
This problem occurs primarily in urban areas.
NOTE
 Reset the time after the 12V starter battery terminals are disconnect 
ed and reconnected. 
 Seconds do not appear 
in the clock display, 
but after adjusting the  
“minutes” setting, the 
clock begins to opera 
te from 0 seconds.
General information about  your radio 
CAUTION Changes or modifica
tions not expressly 
approved by the party meeting the aboveconditions could void th 
e user’s authority to 
operate the equipment.
Signal transmission FM AM 25 to 40 mile radius (25 to 40 miles) 
100 mile radius (100 miles)
Weak reception (fading)  Reflection 
BK0220401US.book  28 ページ  2015年6月3日 水曜日 午前7時42分 
         
        
        General information about your radio 
Comfort controls 7-29
7
If one listens to a weak station and is in the vicinity of another st 
rong station, both sta- 
tions might be received simultaneously. 
Stereo reception requires a high quality broadcast signal. This means that types of disturbances mentioned previously becomemore marked and the reception range is somewhat diminished during stereo recep- tion. FM reception is affected by the electrical sys- tems of vehicles in the vicinity, especially those without an electr 
onic noise suppression 
device. The disturbance is even greater if thestation is weak or poorly tuned. FM reception is not as sensitive to electrical disturbances as AM. AM 
 reception is sensi- 
tive to electrical dist 
urbances such as power 
lines, lightning and ot 
her types of similar 
electrical phenomena.
Cross modulation 
FM stereo reception  Causes of disturbances 
BK0220401US.book  29 ページ  2015年6月3日 水曜日 午前7時42分