2016 MITSUBISHI iMiEV CD player

Air purifier
Comfort controls 7-11
7
The air conditioning should be operated for at least five minutes each week, even in cold weather. This includes the quick defrostingmode. Operating the
air condition system
weekly maintains lubrication of the compres- sor internal parts and maintains the air condi-tioning in the best operating condition.
N00733800177
The air conditioning system is equipped with an air filter to reduc
e pollen and dust entering
the cabin.The air filter’s ability to collect pollen and dust will be reduced as
it becomes dirty, so
replace it periodically. For the maintenanceinterval, refer to the “WARRANTY AND MAINTENANCE MANUAL”.
N00766601026
You can run the air conditioning in advanceof using the vehicle. For details, refer to “Remote Climate Cont
rol” on page 3-36,
3-47.
N00734301062
The audio system can only be used when theelectric motor switch is in the “ON” or“ACC” position.
CAUTION The air conditioning system in your vehicle must be charged with the refrigerant HFC-134a and the lubricant POE MA68EV.Use of any other refrigerant or lubricant will cause severe damage a
nd may require replac-
ing your vehicle’s en
tire air conditioning
system. The release of refrigerant into the atmo- sphere is not recommended.The new refrigerant HFC-134a in your vehi- cle is designed not to harm the earth’s ozone layer. However, it may contribute slightly toglobal warming. It is recommended that the old refrigerant be saved and recycled for future use.
During a long period of disuse
Air purifier
NOTE
 Operation in certain conditions such as driv- ing on a dusty road or frequent use of the air conditioning can reduce
the service life of
the filter. When you feel that the air flow is lower than normal or when the windshield or windows start to fog up easily, replace the airfilter. Contact a certified i-MiEV dealer for assis- tance.
Remote Climate Control
AM/FM electronically tuned radio with CD player
(if so
equipped)
NOTE
 To listen to the audio system while the elec- tric motor unit is not running, turn the elec-tric motor switch to the “ACC” position. If the electric motor switch is in the “ACC”cally turn off after a certain period of time and you will no longer be able to use the audio system. The accessory power comeson again if the electric motor switch is turned from the “ACC” position. Refer to “ACC power auto-cutout f
unction” on page 5-19.
 If a cellular phone is
used inside the vehicle,
it may create noise in the audio equipment.This does not mean that anything is wrong with your audio equipment. In such a case, use the cellular phone at
a place as
far away
as possible from the audio equipment.
BK0220401US.book 11 ページ ２０１５年６月３日　水曜日　午前７時４２分

AM/FM electronically tuned radio with CD player (if so equipped) 7-12 Comfort controls
7
N00711900716
N00712000408
Turn the VOLUME knob clockwise to increase the volume; counterclockwise to decrease the volume.The status will be displayed in the display.
N00712100672
1. Press the button repeatedly to select the tone, balance and SCV (Speed Com- pensated Volume) function control tochange. The order is: BASS
 TREBLE
 FADER
 BALANCE
 SCV

Audio adjust mode OFF2. Press the SEEK button to change the tone, balance and SCV function setting. The status will be di
splayed in the display.
If foreign objects or wa
ter get into the audio
equipment, or if smoke or a strange odorcomes from it, immediately turn off theaudio system and have
it checked at a certi-
fied i-MiEV dealer. Ne
ver try to repair it
yourself. Avoid using the audio system untilit is inspected by a qualified person.  If the audio system is damaged by foreign objects, water, or fi
re, have the system
checked at a certif
ied i-MiEV dealer.
Volume and tone control panel

1- VOLUME (Volume control) knob 2- SEEK (Audio adjust) button3- Display 4- POWER (On-Off) button 5- (Mode change) button
NOTE
To adjust the volume

NOTE
 The volume control mode will shut off auto- matically if the anothe
r mode is selected, or
if no adjustment is ma
de within about 2 sec-
onds.
To adjust the tone

A- Adjust mode B- Adjust level
BK0220401US.book 12 ページ ２０１５年６月３日　水曜日　午前７時４２分

AM/FM electronically tuned radio with CD player (if so equipped)
Comfort controls 7-13
7
To select the desired bass level. To select the desi
red treble level.
To balance the volume from the F (front) and the R (rear) speakers. To balance the volume from the L (left) and the R (right) speakers. Speed Compensated Volume function is a feature that automatically adjusts the VOL-UME, BASS and TREBLE
settings in accor-
dance with the vehicle speed. The effects of the SCV function can beselected either of three levels (LOW, MID and HIGH). Select the degree of your choice by pressing the SEEK button.If you want to stop th
e SCV function, select
the OFF.
N00734900902
Adjust Mode
AdjustLevel
SEEK button opera-
tion
BASS
-6 to 6
Stronger Weaker
TRE- BLE
Stronger Weaker
FADER
F11 to R11
F (Front) increases
R (Rear) increases
BAL- ANCE
L11 to R11
R (Right) increases
L (Left)
SCV
HIGH, MID, LOW, OFF
HIGH  MID LOW  OFF
HIGH  MID LOW  OFF
BASS (Bass tone control)

TREBLE (Treble tone control)

FADER (Front/Rear balance con- trol)BALANCE (Left/Right balance control)

SCV (Speed Compensated Vol- ume) function

NOTE
 The audio adjust mode
will automatically
shut off when another m
ode is selected, or if
no adjustment is made
within about 10 sec-
onds.
Radio control panel and display

1- FM (FM1/FM2) indicator 2- RADIO (AM/FM selection) button 3- MEMORY (Memory selection) button4- POWER (On-Off) button 5- SCAN button 6- SEEK (Up-seek) button7- SEEK (Down-seek) button
BK0220401US.book 13 ページ ２０１５年６月３日　水曜日　午前７時４２分

AM/FM electronically tuned radio with CD player (if so equipped) 7-14 Comfort controls
7
N00735000913
1. Press the POWER button until it beeps to turn the audio system ON and OFF. The system turns on in the last mode used.Press the RADIO button to turn ON the radio. 2. Press the RADIO button to select thedesired band (AM/FM1/FM2). 3. Press the SEEK button
to tune to a station,
or press the MEMORY button either or to tune in to a station memorized. Refer to “Automatic tuning”, “Manual tuning” or “To enter frequencies into the memory”.
After pressing the SEEK button, a receivable station will be automatically selected andreception of the st
ation will begin.
Press the SCAN button.
The radio will tune
consecutively to each
available station for
about 5 seconds per stat
ion. If you want to
stop scanning, press the SCAN button again. The frequency display of the current stationflashes once per second during SCAN.
The frequency changes every time the SEEK button is pressed. Press the button to sele
ct the desired station.
As many as 6 AM and 12 FM stations can be entered into the memory. To store a frequency in the memory, follow these steps: 1. Press the SEEK button to tune to the fre- quency you wish to keep in the memory. 2. Press the MEMORY button either or
until it beeps. The sound will be momentarily inter-rupted while the frequency is being entered into the memory.
3. To recall a frequency that has been saved in memory, press the MEMORY buttonbriefly for no longer than about 1 second.
To listen to the radio

Automatic tuning

SCAN function
Manual tuning

To enter frequencies into the mem- ory

NOTE
 Disconnecting the 12V st
arter battery cables
erases all the radio stat
ion settings stored in
the memory.
BK0220401US.book 14 ページ ２０１５年６月３日　水曜日　午前７時４２分

AM/FM electronically tuned radio with CD player (if so equipped)
Comfort controls 7-15
7
N00735300743
N00735502097
1. Press the POWER button until it beeps to turn the audio system ON and OFF. The system turns on in the last mode used. 2. Insert the disc with the label facing up.When a disc is inserted, the CD indicator will come on and the CD player will begin playing even if the radio is being used.The CD player will also begin playing when the CD button is pressed with a disc set in the CD player or in the disc loadingslot, even if the radio is being used.
When the eject button is pressed, the disc automatically stops and
is ejected. The sys-
tem automatically swit
ches to radio mode.
CD control panel and display

1- Disc loading slot 2- Eject button3- CD (CD mode changeover) button 4-
TRACK (Fast-forward/Track up)
5-
TRACK (Fast-reverse/Track down) button
6- CD indicator 7- SEL (Select m
ode) indicator
8- FOLDER indicator9- TRACK indicator 10- Display 11- RDM/F-RDM indicator12- RPT/F-RPT indicator 13- SELECT knob 14- POWER (On-Off) button/PAGE (Title
scroll) button
15- DISP (Title display) button 16- MENU button
17- SCAN button 18-
SEEK (Up-seek) button/ (Return) button
19-
SEEK (Down-seek) button/ (Select) button
To listen to a CD

To s e t a d i s c

NOTE
 For information concerning the adjustment of volume and tone, refer to “To adjust the volume” on page 7-12 and “To adjust the tone” on page 7-12.  3 inches (8 cm) compact disc cannot be played on this CD player.
 For information concerning the handing of the compact discs, re
fer to “Handling of
compact discs” on page 7-25.
To eject a disc

NOTE
 If you do not remove an
ejected disc before
15 seconds have elapse
d, the disc will be
reloaded.
To listen to a music CD

NOTE
BK0220401US.book 15 ページ ２０１５年６月３日　水曜日　午前７時４２分

AM/FM electronically tuned radio with CD player (if so equipped) 7-16 Comfort controls
7
Push the CD button if a disc is already in the CD player. The audio system will enter CDmode and start playba
ck. The track number
and the playing time will appear on the dis- play. The tracks in the disc will be playedconsecutively and continuously. This CD player allows you to play MP3 (MPEG Audio Layer-3) files recorded on CD-ROMs, CD-Rs (reco
rdable CDs), and
CD-RWs (rewritable CDs) in ISO9660 Level 1/Level 2, Joliet, a
nd Romeo formats. Each
disc may have a maximum of 16 trees, 100folders and 255 files. During MP3 playback, the unit can display ID3 tag information. For information concerning ID
3 tag, refer to “CD
text and MP3 title di
splay” on page 7-19.
Push the CD button if a disc is already in the CD player.The display shows “READING”, then play- back begins. The folder number, the track number and the playing time will appear onthe display.
To listen to an MP3 CD

NOTE
 While listening to a
disc on which CD-DA
(CD-Digital Audio) a
nd MP3 files have both
been recorded, you can switch between read- ing of the CD-DA, reading of the MP3 files, and the external audio input mode by press-ing the CD button for 2 seconds or longer (until you hear a beep).  With a disc that contains both CD-DA and MP3 files, the CD-DA files are automati- cally played first.  The playback sound quality differs depend- ing on the encoding software and the bit rate.For details, refer to
the user manual of your
encoding software.  Depending on file/folde
r configurations on a
disc, it may take some
time before playback
starts.  MP3 encode software and writing software are not supplied with this unit.  You may encounter trouble in playing an MP3 or displaying the information of MP3files recorded with certain writing software or CD recorders (CD-R/RW drivers).  If you record too many folders or files other than MP3 onto a disc, it
may take some time
before playback starts.
 This unit does not record MP3 files.  For information concerning CD-Rs/RWs, refer to “Notes on CD-Rs/RWs” on page 7-26.CAUTION Attempting to play a file not in the MP3 for- mat which has the “.mp3” file name may produce noise from the speakers and speakerdamage, and can da
mage your hearing.
NOTE
BK0220401US.book 16 ページ ２０１５年６月３日　水曜日　午前７時４２分

AM/FM electronically tuned radio with CD player (if so equipped)
Comfort controls 7-17
7
To fast forward or fast reverse the disc, press the TRACK button or the TRACK but- ton.
You can fast-forward the disc by pressing the TRACK button. While the button is kept pressed, the disc wi
ll be fast-forwarded.
You can fast reverse th
e disc by pressing the
TRACK button. While the button is kept pressed, the disc wi
ll be fast-reversed.
You can select your desi
red track by using the
TRACK button. Press the TRACK button repeatedly until the desired track number appears on the dis-play. When listening to a MP3 CD, keep pressing the button to continue to move up tracks. Press the TRACK button repeatedly until the desired track number appears on the dis-play. When listening to a MP3 CD, keep pressing the button to continue to move down tracks.
Operate the following buttons or the SELECT knob to select desired file.When this mode is activated by pressing the
button, the SEL indicator will be dis-
played in the display.
Folder selection ord
er/MP3 file playback
order (Example) Folder selection In the order File selection In the orderTo fast forward/reverse the disc

Root folder (Root directory)
Tree 1 Tree 2 Tree 3 Tree 4
Fast forward Fast reverseTo select a desired track

Track up Track down
NOTE
 Pressing the TRACK button once during the song will cause the
CD player to restart
playback from the beginning of the song.
To find a file (MP3 CDs only)

button
:Press the button to start this mode or cancel the selection.
SELECT knob :Turn the knob to show the
folder or file.
button
:Press the button to select the folder or file.
NOTE
 If no operation is performed for 10 seconds or more or other button is operated after theSELECT knob has been turned, searching ofthe desired file is canceled.  If no operation is perf
ormed for 5 seconds or
more after the file is displayed, playback starts.
BK0220401US.book 17 ページ ２０１５年６月３日　水曜日　午前７時４２分

AM/FM electronically tuned radio with CD player (if so equipped) 7-18 Comfort controls
7
N00771500013
1. Press the MENU button until beeps. 2. Press the SEEK / button repeatedly to select the mode. 3. Press the MENU button until you hear a beep. The selected mode will operate.
N00771600014
Select the ALL REPEAT mode. Refer to “Toselect the playing
mode” on page 7-18.
The all tracks on the
disc will be played
repeatedly. Select the REPEAT mode. Refer to “To select the playing mode” on page 7-18. The RPT indicator will come on and repeatthe same track. Select the F-REPEAT mode. Refer to “To select the playing
mode” on page 7-18.
The F-RPT indicator will come on and the all track on the currently selected folder will be played repeatedly.
N00771800016
Select the RANDOM m
ode. Refer to “To
select the playing mode” on page 7-18. The RDM indicator will come on and thetracks on the disc will be played in a random sequence. Select the F-RANDOM mode. Refer to “To select the playing mode” on page 7-18. The F-RDM indicator will come on and thetracks on the currently selected folder will be played in a random sequence. Select the RANDOM m
ode. Refer to “To
select the playing mode” on page 7-18. The RDM indicator will come on and the files from all the folders on the disc will beplayback in a random sequence.
 When the SEL indicato
r is not shown on the
display and the SELECT knob is operated,the volume adjustment is effective.
To select the playing mode

NOTE(MP3 CDs only)

Repeat an all track (normal playback) Repeat a track Repeat tracks in th
e same folder (MP3
CDs only)
NOTE
 With a disc that contains both CD-DA and MP3 files, the repeat
mode causes only files
of the same format (CD-DA only or MP3files only) to be repeated.
To play tracks in random order

Random playback for a disc (music CDs only) Random playback for a folder (MP3 CDs only) Random playback for all folders on a disc (MP3 CDs only)
BK0220401US.book 18 ページ ２０１５年６月３日　水曜日　午前７時４２分