2016 MERCEDES-BENZ SPRINTER low beam

[x] Cancel search: low beam

Page 8 of 290

MERCEDES-BENZ SPRINTER 2016  MY16 Operator’s Manual Central lockingAutomatic locking ............................ 64
Important safety notes .................... 64
Locking/unlocking (buttons) ........... 64
Locking/unlocking (SmartKey) ........ 59
Lock

Page 14 of 290

MERCEDES-BENZ SPRINTER 2016  MY16 Operator’s Manual Key positions.................................... .119
Kickdown ...........................................1 26
L
Lamps
see Warning and indicator lamps
Lane Keeping Assist
Activating/deactivating ....

Page 36 of 290

MERCEDES-BENZ SPRINTER 2016  MY16 Operator’s Manual FunctionPage
¦Fluid level too low in wind-
shield washer/headlamp
cleaning system
202
åDEF supply low or contami-
nated/diluted162
Exhaust gas aftertreatment
malfunction197
ÄIndicator lamp, distanc

Page 81 of 290

MERCEDES-BENZ SPRINTER 2016  MY16 Operator’s Manual Useful information
This Operator's Manual describes all models as
well as standard and optional equipment of your
vehicle that were available at the time of going
to print. Country-specific variat

Page 82 of 290

MERCEDES-BENZ SPRINTER 2016  MY16 Operator’s Manual The daytime running lamps function must be
activated using the on-board computer:
Rvehicles with steering wheel buttons
(Ypage 171)
Rvehicles without steering wheel buttons
(Ypage 164)
XTo switch on:t

Page 83 of 290

MERCEDES-BENZ SPRINTER 2016  MY16 Operator’s Manual XTo switch on the rear fog lamp:pull the light
switch out to the second locking point.
The yellow Rindicator lamp on the light
switch lights up.
XTo switch off the front and rear foglamps:
push in the

Page 84 of 290

MERCEDES-BENZ SPRINTER 2016  MY16 Operator’s Manual The headlamp range control is used to adapt the
downward angle of the headlamp beams in
accordance with the load on your vehicle. The
cone of light from the headlamps changes if
seats are occupied or

Page 85 of 290

MERCEDES-BENZ SPRINTER 2016  MY16 Operator’s Manual Highbeam Assist
General notes
You can use this function to set the headlamps
to change between low beam and high beam
automatically. The system recognizes vehicles
with their lights on, either approac
Page:   1-8 9-16 next >