2016 MERCEDES-BENZ S-Class SEDAN light

Selecting the screen for the remote con-
trol
You can use the remote control to operate
one of the two rear screens at a time. To do
so, you must switch the remote control to the
desired screen.
XTo select the left-hand screen: turn thumb-
wheel:until "L REAR" appears in the win-
dow.
XTo select the right-hand screen: turn the
thumbwheel until "REAR R" appears in the
window.
XTo select the COMAND screen: turn thumb-
wheel :until "COMAND" appears in the
window.
Please be aware that using the thumbwheel
to select screens may cause unwanted
changes to the screens of your occupants.
Up to four remote controls can be used in the
vehicle at the same time.
Switching the screen on/off
The switched-on rear compartment screens
switch off after 30 minutes if:
Rthe SmartKey is in position 0or 1in the
ignition lock
Rthe SmartKey is not inserted Before the screens switch off, they show a
message to this effect.
You can switch the screens back on. Please
note that this may cause the starter battery to
discharge.
XPress button
:on the remote control.
The respective rear-compartment screen
switches on or off.
iYou can only switch the screens on using
the remote control if the ignition is
switched on.
Switching the button lighting on/off
XLighting of the remote control buttons is
divided into three areas. The corresponding
area is activated every time you press a
button. It switches off again automatically
5 to 10 seconds after the last button has
been pressed.
274Rear Seat Entertainment System overview
Rear Seat Entertainment System

XSelectLanguageusing the 9: but-
tons and press the 9button to confirm.
The list of languages appears. A #dot
indicates the current setting.
XSelect the language using the 9:
buttons and press the 9button to confirm.
The system activates the corresponding
language.
Switching the display design
XSelect Vehicleusing the
9:=; buttons on the
remote control and press the 9button to
confirm.
XSelect System Settingsusing
the :=; buttons on the remote
control and press the 9button to confirm.
You see the System Settings
menu on
the selected rear screen.
XSelect Displayusing the :9 but-
tons on the remote control and press the
9 button to confirm.
XSelect Day Mode,Night Modeor Auto‐
maticusing the 9: buttons and
press the 9button to confirm.
The dot indicates the current setting.
DesignExplanation
Day ModeThe display is set per-
manently to day
design.
Night ModeThe display is set per-
manently to night
design.
AutomaticThe display design
changes depending on
the vehicle instrument
cluster illumination.
Setting the brightness
XSelect Vehicleusing the
9:=; buttons on the remote control and press the
9button to
confirm.
XSelect System Settingsusing
the :=; buttons on the remote
control and press the 9button to confirm.
You see the System Settings
menu on
the selected rear screen.
XSelect Displayusing the :9 but-
tons on the remote control and press the
9 button to confirm.
XSelect Bright.using the 9: but-
tons and press the 9button to confirm.
A scale appears.
XAdjust the brightness using the 9:
buttons and press the 9button to confirm.
The brightness bar moves up or down. The
picture becomes lighter or darker in
accordance with the scale.
Showing/hiding the picture
XSelect Vehicleusing the
9:=; buttons on the
remote control and press the 9button to
confirm.
XPress button :on the remote control.
A menu appears.
XSelect Display Offusing the
9:=; buttons and press
the 9button to confirm.
XTo display the picture: press the9but-
ton.
Adjusting sound settings
You can select the sound settings in the radio,
audio CD/audio DVD/MP3, video DVD and
AUX modes.
XSelect a medium (e.g. audio CD mode)
(
Ypage 287).
XTo show the menu: press the :button
on the remote control.
System settings281
Rear Seat Entertainment System
Z

ESelects language
FStop function
GPause function
XTo show:press the9button on the
remote control.
XTo hide: press the %button on the
remote control.
Fast forwarding/rewinding
XPress and hold the EorF button on
the remote control until the desired posi-
tion has been reached.
You see the control menu.
Pause function
XTo show the menu: press the9button on
the remote control.
XTo pause playback: selectËand press
the 9button to confirm.
The Ë display changes to Ì.
XTo continue playback: selectÌand
press the 9button to confirm.
The menu is hidden.
Stop function
XTo show the menu: press the9button on
the remote control.
XTo interrupt playback: selectÉand
press the 9button to confirm.
The Ë display changes to Ì. The
video image is hidden.
XTo continue playback: selectÌand
press the 9button to confirm.
Playback continues from the point where it was interrupted. The menu is hidden.
XTo stop playback: while playback is inter-
rupted, select Éagain and press 9to
confirm.
Playback stops and returns to the begin-
ning of the DVD. Ìis highlighted.
XTo restart playback: selectÌand
press the 9button to confirm.
Playback starts from the beginning of the
DVD.
Selecting a scene/chapter
General notes
Also observe the information on the video
DVD mode (
Ypage 245).
Skipping forwards/backwards
XPress =or; on the remote control.
The control menu appears for approx-
imately eight seconds.
Selecting a scene/chapter directly
The examples illustrate how to select scene/
chapter 5.
XOption 1: while the film is playing, press
the h button on the remote control.
XPress the corresponding number key, such
as5.
XOption 2: while the film is playing, press
the 9button on the remote control and
show the menu.
XSelect Menuand press the 9button.
The DVD menu appears.
290Video DVD mode
Rear Seat Entertainment System

remote control and press the9button to
execute it.
A menu appears and the first entry, Select
is highlighted.
XPress the9button.
AUX mode
General notes
You can connect an external video source in
the rear compartment.
Depending on the vehicle model and equip-
ment level, the AUX jacks are found:
Rin the stowage box between the rear seats
or
Rin the rear-compartment armrest
(
Ypage 276).
Please see the manufacturer's operating
instructions for how to operate the external
video source.
Please consult an authorized Mercedes-Benz
Center for further information.
Connecting AUX equipment
XInsert the audio plugs for the left and right
signals into the corresponding Land R
jacks.
XInsert the video plug into the Vjack.
Activating AUX mode
XSelect Auxusing the 9=; but-
tons on the remote control and press the
9 button to confirm.
The AUX source is switched on once the
AUX device is active.
AUX mode293
Rear Seat Entertainment System
Z