2016 MERCEDES-BENZ GLE-Class engine

[x] Cancel search: engine

Page 80 of 450

MERCEDES-BENZ GLE-Class 2016 W218 Owners Manual Useful information
i
This Operators Manual describes all models
and all standard and optional equipment of
your vehicle available at the time of publica-
tion of the Operators Manual. Country-spe-
c

Page 81 of 450

MERCEDES-BENZ GLE-Class 2016 W218 Owners Manual The SmartKey centrally locks and unlocks the
following components:
Rthe doors
Rthe tailgate
Rthe fuel filler flap
The turn signals flash once when unlocking and
three times when locking.
You can also

Page 82 of 450

MERCEDES-BENZ GLE-Class 2016 W218 Owners Manual XTo deactivate:press the&button on the
SmartKey twice in rapid succession.
The battery check lamp of the SmartKey
flashes twice briefly and lights up once, then
KEYLESS-GO is deactivated (
Ypage 81).

Page 86 of 450

MERCEDES-BENZ GLE-Class 2016 W218 Owners Manual ProblemPossible causes/consequences andMSolutions
The engine cannot be
started using the Smart-
Key.The on-board voltage is too low.
XSwitch off non-essential consumers, e.g. seat heating or interior

Page 89 of 450

MERCEDES-BENZ GLE-Class 2016 W218 Owners Manual Cargo compartment
Important safety notes
GWARNING
Combustion engines emit poisonous exhaust
gases such as carbon monoxide. If the tailgate is open when the engine is running, particu-
larly if the veh

Page 90 of 450

MERCEDES-BENZ GLE-Class 2016 W218 Owners Manual Opening and closing manually from
outside
Opening
XPress the %button on the SmartKey.
XPull handle :.
XRaise the tailgate.
Vehicles with the EASY-PACK tailgate: if you
pull handle :and then release it

Page 91 of 450

MERCEDES-BENZ GLE-Class 2016 W218 Owners Manual Opening the tailgate automatically
You can open the tailgate automatically with the
SmartKey or the handle in the tailgate.
XPress and hold the Fbutton on the Smart-
Key until the tailgate opens.
or
X

Page 94 of 450

MERCEDES-BENZ GLE-Class 2016 W218 Owners Manual XTo open fully:press the switch beyond the
point of resistance and release it.
Automatic operation is started.
XTo close manually: pull the corresponding
switch and hold it.
XTo close fully: pull the