Black plate (20,1)
NOTElIf the ignition is switched off while the seat
warmer is operating (High, Mid or Low)
and then switched ON again, the seat
warmer will automatically operate at the
temperature set before switching off the
ignition.
lUse the seat warmer when the engine is
running. Leaving the seat warmer on for
long periods with the engine not running
could cause the battery power to be
depleted.
lThe temperature of the seat warmer cannot
be adjusted beyond High, Mid and Low
because the seat warmer is controlled by a
thermostat.
qSeat Position Memory (Driver's
seat)í
The seat position memory function allows
you to program the driver's seat to a
desired seat position and to call up a
programmed position with the simple
touch of a button.
CAUTION
Do not place fingers or hands around
the bottom of the seat while the seat
memory function is operating. The
seat moves automatically while the
seat memory function is operating
and fingers or hands could get
pinched and injured.
SET button
The seat position can be programmed or
operated using the following operations.
lOperation of the buttons on the side of
the seat.
lOperation using the key.
NOTE
lIndividual seat positions can be
programmed to the two available
programming buttons on the side of the
driver's seat, plus one seat position for each
registered key.
lIf the vehicle has been serviced and the
battery cables disconnected, the
programmed seat positions will have been
erased. Re-program the seat positions.
Programming
1. Switch the ignition OFF.
2. Adjust the seat to the desired position
using the slide lifter and reclining
switches.
Refer to Seat Operation on page 2-5.
3. Press and hold the memory SET button
until a beep sound is heard.
2-8
Essential Safety Equipment
íSome models.
Seats
CX-5_8DV2-EA-14K_Edition3 Page20
Thursday, February 26 2015 5:31 PM
Form No.8DV2-EA-14K
Black plate (21,1)
4. Perform one of the following settings
within 5 seconds of completing step 3
above:
lTo program memory button 1 or 2,
press and hold the button until a
beep sound is heard.
lTo program a key, press and hold
the key
switch until a beep sound
is heard.
Adjusting a programmed position
(Programming to a button on the seat
side)
1. While the vehicle is stopped, press the
programming button for the seat
position you want to call up (button 1
or 2).
2. A beep sound is heard when the seat
position adjustment is completed.NOTE
lIf seat movement is not required, only the
beep sounds.
lWhen the ignition is switched ON, the seat
position memory function does not operate
unless the selector lever is in the P position
(Automatic transaxle) or the parking brake
is applied (Manual transaxle).
lWhen the ignition is switched OFF, the seat
position memory function is operable while
the selector lever is in a position other than
P position (Automatic transaxle) or the
parking brake is not applied (Manual
transaxle), however, if the ignition is
switched ON while the seat position
memory function is operating, the operation
is stopped.
lThe seat position adjustment is canceled in
the following cases:
lAny of the seat adjustment switches is
operated.
lThe SET button is pressed.lProgramming button 1 or 2 is pressed.lThe key lock switch or unlock switch is
operated.
lThe vehicle starts moving.
(When programming to the key)
1. Unlock the doors by pressing a request
switch or the key
switch.
2. After unlocking the doors, the seat
position adjustment begins within 40
seconds of opening the driver's door,
and a beep sounds when the operation
is finished.
Essential Safety Equipment
Seats
2-9
CX-5_8DV2-EA-14K_Edition3 Page21
Thursday, February 26 2015 5:31 PM
Form No.8DV2-EA-14K
Black plate (22,1)
NOTElIf there is no seat position movement, a
beep is not heard.
lWhen the ignition is switched ON, the seat
position memory function does not operate
unless the selector lever is in the P position
(Automatic transaxle) or the parking brake
is applied (Manual transaxle).
lWhen the ignition is switched OFF, the seat
position memory function is operable while
the selector lever is in a position other than
P position (Automatic transaxle) or the
parking brake is not applied (Manual
transaxle), however, if the ignition is
switched ON while the seat position
memory function is operating, the operation
is stopped.
lThe seat position adjustment is canceled in
the following cases:
lAny of the seat adjustment switches is
operated.
lThe SET button is pressed.lProgramming button 1 or 2 is pressed.lThe keyswitch orswitch is
operated.
lThe vehicle starts moving.
Erasing programmed seat positions
(Erasing the seat positions programmed
to the key)
1. Switch the ignition OFF.
2. Continue pressing the seat SET button
until a beep sound is heard.
3. After the beep sounds, press the key
switch continuously within 5 seconds
until the beep sounds.
Rear Seat
qSplit Folding
The seatbacks can be folded down to
provide more space in the luggage
compartment.
WARNING
Tightly secure cargo in the luggage
compartment when it is transported
with the seatbacks folded down:
Driving without tightly securing
cargo and luggage is dangerous as it
could move and become an
obstruction to driving during
emergency braking or a collision
resulting in an unexpected accident.
Always remove the child-restraint
system from the rear seat before
operating the remote handle levers for
the rear seat:
Operating the remote handle levers
while a rear-facing child-restraint
system is in the rear seat is
dangerous. It could cause injury to a
child seated in the child-restraint
system when the seatback suddenly
flips forward.
2-10
Essential Safety Equipment
Seats
CX-5_8DV2-EA-14K_Edition3 Page22
Thursday, February 26 2015 5:31 PM
Form No.8DV2-EA-14K
Black plate (623,1)
O
Owner Maintenance
Closing the Hood ....................... 6-25
Engine Compartment
Overview .................................... 6-26
Key Battery Replacement .......... 6-39
Opening the Hood ...................... 6-24
Owner Maintenance
Precautions ................................. 6-22
P
Parking Brake ................................... 4-75
Personalization Features ................... 9-10
Power Steering .................................. 4-89
Power Windows ................................ 3-32
R
Radar Sensor (Front) ....................... 4-137
Radar Sensors (Rear) ...................... 4-142
Rear Coat Hooks ............................. 5-135
Rear Cross Traffic Alert (RCTA) .... 4-111
Rear Door Child Safety Locks .......... 3-19
Rear Seat ........................................... 2-10
Rear View Monitor ......................... 4-152
Rear Window Defogger .................... 4-69
Rear Window Washer ....................... 4-68
Rear Window Wiper .......................... 4-68
Rearview Mirror ................................ 3-30
Recommended Oil ............................ 6-27
Recording of Vehicle Data ................ 8-22
Recreational Towing ......................... 3-56
Registering Your Vehicle in A Foreign
Country ............................................. 8-18
R
Replacement
Fuse ............................................ 6-56
Key battery ................................. 6-39
Light Bulbs ................................ 6-46
Tires ........................................... 6-43
Wheel ......................................... 6-44
Wiper .......................................... 6-33
Rocking the Vehicle .......................... 3-43
S
Safety Defects, Reporting ................. 8-14
Satellite Radio ................................... 5-42
Saving Fuel and Protection of the
Environment ..................................... 3-41
Scheduled Maintenance ...................... 6-4
Seat
Seat Position Memory
(Driver's seat) ............................... 2-8
Seat Belt System
3-point type ................................ 2-20
Automatic locking ...................... 2-19
Emergency locking .................... 2-19
Extender ..................................... 2-24
Pregnant women ........................ 2-19
Seats
Front seat ...................................... 2-5
Head restraint ............................. 2-14
Rear seat ..................................... 2-10
Seat warmer .................................. 2-7
Security System
Immobilizer system .................... 3-37
Theft-deterrent system ............... 3-39
Service Publications .......................... 8-54
Smart Brake Support (SBS) ............ 4-131
Collision warning ..................... 4-133
Stoping the Smart Brake Support
(SBS) system operation ............ 4-133
Index
10-7
CX-5_8DV2-EA-14K_Edition3 Page623
Thursday, February 26 2015 5:35 PM
Form No.8DV2-EA-14K