2016 MAZDA MODEL CX-5 coolant temperature

Black plate (461,1)
Engine Coolant
qInspecting Coolant Level
WARNING
Do not use a match or live flame in the
engine compartment. DO NOT ADD
COOLANT WHEN THE ENGINE IS HOT:
A hot engine is dangerous. If the
engine has been running, parts of the
engine compartment can become
very hot. You could be burned.
Carefully inspect the engine coolant
in the coolant reservoir, but do not
open it.
Switch the ignition to off and
make sure the fan is not running before
attempting to work near the cooling
fan:
Working near the cooling fan when it
is running is dangerous. The fan
could continue running indefinitely
even if the engine has stopped and
the engine compartment temperature
is high. You could be hit by the fan
and seriously injured.
Do not remove either cooling
system cap when the engine and
radiator are hot:
When the engine and radiator are
hot, scalding coolant and steam may
shoot out under pressure and cause
serious injury.
NOTE
Changing the coolant should be done by an
Authorized Mazda Dealer.
Inspect the antifreeze protection and
coolant level in the coolant reservoir at
least once a year―at the beginning of the
winter season―and before traveling
where temperatures may drop below
freezing.
Inspect the condition and connections of
all cooling system and heater hoses.
Replace any that are swollen or
deteriorated.
The coolant should be at full in the
radiator and between the F and L marks
on the coolant reservoir when the engine
is cool.
If it is at or near L, add enough coolant to
the coolant reservoir to provide freezing
and corrosion protection and to bring the
level to F.
Securely tighten the coolant reservoir tank
cap after adding coolant.
CAUTION
ØRadiator coolant will damage
paint.
Rinse it off quickly if spilled.
Maintenance and Care
Owner Maintenance
6-29
CX-5_8DV2-EA-14K_Edition3 Page461
Thursday, February 26 2015 5:34 PM
Form No.8DV2-EA-14K

Black plate (499,1)
NOTElDo not use a wire brush or any abrasive
cleaner, polishing compound, or solvent on
aluminum wheels. They may damage the
coating.
lAlways use a sponge or soft cloth to clean
the wheels.
Rinse the wheels thoroughly with lukewarm
or cold water. Also, be sure to clean the
wheels after driving on dusty or salted
roads to help prevent corrosion.
lAvoid washing your vehicle in an automatic
car wash that uses high-speed or hard
brushes.
l(19-inch wheel vehicle)
If your aluminum wheels lose luster, apply
wax which contains no polishing powder.
qPlastic Part Maintenance
lWhen cleaning the plastic lenses of the
lights, do not use gasoline, kerosene,
rectified spirit, paint, thinner, highly
acidic detergents, or strongly alkaline
detergents. Otherwise, these chemical
agents can discolor or damage the
surfaces resulting in a significant loss
in functionality. If plastic parts become
inadvertently exposed to any of these
chemical agents, flush with water
immediately.
lIf plastic parts such as the bumpers
become inadvertently exposed to
chemical agents or fluids such as
gasoline, oil, engine coolant, or battery
fluid, it could cause discoloration,
staining, or paint peeling. Wipe off any
such chemical agents or fluids using a
soft cloth immediately.
lHigh water temperature and high water
pressure car washers are available
depending on the type of high pressure
car washer device. If the car washer
nozzle is put too close to the vehicle or
aimed at one area for an extended
period of time, it could deform plastic
parts or damage the paint.
lDo not use wax containing compounds
(polish). Otherwise, it could result in
paint damage.
lIn addition, do not use an electrical or
air tool to apply wax. Otherwise, the
frictional heat generated could result in
deformation of plastic parts or paint
damage.
Maintenance and Care
Appearance Care
6-67
CX-5_8DV2-EA-14K_Edition3 Page499
Thursday, February 26 2015 5:35 PM
Form No.8DV2-EA-14K

Black plate (520,1)
Overheating
If the High engine coolant temperature
warning light illuminates, the vehicle
loses power, or you hear a loud knocking
or pinging noise, the engine is probably
too hot.
WARNING
Switch the ignition to off and
make sure the fan is not running before
attempting to work near the cooling
fan:
Working near the cooling fan when it
is running is dangerous. The fan
could continue running indefinitely
even if the engine has stopped and
the engine compartment temperature
is high. You could be hit by the fan
and seriously injured.
Do not remove either
cooling system cap when the engine
and radiator are hot:
When the engine and radiator are
hot, scalding coolant and steam may
shoot out under pressure and cause
serious injury.
Open the hood ONLY after steam is no
longer escaping from the engine:
Steam from an overheated engine is
dangerous. The escaping steam could
seriously burn you.
If the High engine coolant temperature
warning light illuminates:
1. Drive safely to the side of the road and
park off the right-of-way.2. Put a vehicle with an automatic
transaxle in park (P), a manual
transaxle in neutral.
3. Apply the parking brake.
4. Turn off the air conditioner.
5. Check whether coolant or steam is
escaping from the engine compartment.
If steam is coming from the engine
compartment:
Do not go near the front of the vehicle.
Stop the engine.
Wait until the steam dissipates, then
open the hood and start the engine.
If neither coolant nor steam is
escaping:
Open the hood and idle the engine until
it cools.
CAUTION
If the cooling fan does not operate
while the engine is running, the
engine temperature will increase.
Stop the engine and call an
Authorized Mazda Dealer.
6. Make sure the cooling fan is operating,
then turn off the engine after the
temperature has decreased.
7. When cool, check the coolant level.
If it is low, look for coolant leaks from
the radiator and hoses.
7-18
If Trouble Arises
Overheating
CX-5_8DV2-EA-14K_Edition3 Page520
Thursday, February 26 2015 5:35 PM
Form No.8DV2-EA-14K

Black plate (529,1)
qIf the high engine coolant
temperature warning light (red)
illuminates or flashes
The light flashes when the engine coolant
temperature is extremely high, and
illuminates when the engine coolant
temperature increases further.
Handling Procedure
Flashing light
Drive slowly to reduce engine load until
you can find a safe place to stop the
vehicle and wait for the engine to cool
down.
Illuminated light
This indicates the possibility of
overheating. Park the vehicle in a safe
place immediately and stop the engine.
Refer to Overheating (page 7-18).
CAUTION
Do not drive the vehicle with the high
engine coolant temperature warning
light illuminated. Otherwise, it could
result in damage to the engine.
qIf the lane departure warning
system (LDWS) OFF Indication/
Indicator Light is indicated
í
Type A
If the indication remains displayed even
though the LDWS switch has been
operated, it indicates a problem in the
system. Have your vehicle inspected at an
Authorized Mazda Dealer.
Type B
A problem in the system may be indicated
under the following conditions. Have your
vehicle inspected at an Authorized Mazda
Dealer.
lThe light does not turn on when the
ignition is switched ON.
lIt remains illuminated even though the
LDWS switch has been switched off.
CAUTION
ØAlways use tires for all wheels that
are of the specified size, and the
same manufacture, brand, and
tread pattern. In addition, do not
use tires with significantly
different wear patterns on the
same vehicle. If such improper
tires are used, the LDWS may not
operate normally.
ØWhen an emergency spare tire is
used, the system may not operate
normally.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
7-27íSome models. CX-5_8DV2-EA-14K_Edition3 Page529
Thursday, February 26 2015 5:35 PM
Form No.8DV2-EA-14K

Black plate (534,1)
qIf the traction control system
(TCS)/dynamic stability control
(DSC) indicator light illuminates
If the light stays on, the TCS, DSC or the
brake assist system may have a
malfunction and they may not operate
correctly. Take your vehicle to an
Authorized Mazda Dealer.
NOTE
lIn addition to the indicator light flashing, a
slight lugging sound will come from the
engine. This indicates that the TCS/DSC is
operating properly.
lOn slippery surfaces, such as fresh snow, it
will be impossible to achieve high rpm
when the TCS is on.
qIf the traction control system (TCS)
OFF indicator light illuminates
If the light remains illuminated and the
TCS is not switched off, take your vehicle
to an Authorized Mazda Dealer. The DSC
may have a malfunction.
qIf the low engine coolant
temperature indicator light (blue)
does not turn off
If the low engine coolant temperature
indicator light remains illuminated after
the engine has been sufficiently warmed
up, the temperature sensor could have a
malfunction. Consult an Authorized
Mazda Dealer.
qIf the turn signal/hazard warning
indicator light illuminates or flashes
at an abnormally high speed
If an indicator light flashes abnormally,
one of the turn signal bulbs may be
burned out. Consult an Authorized Mazda
Dealer.
7-32
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
CX-5_8DV2-EA-14K_Edition3 Page534
Thursday, February 26 2015 5:35 PM
Form No.8DV2-EA-14K

Black plate (621,1)
I
i-ACTIVSENSE ............................... 4-90
Active safety technology ............ 4-90
Adaptive Front Lighting System
(AFS) ......................................... 4-92
Blind Spot Monitoring
(BSM) system .......................... 4-102
Camera and snsors ..................... 4-91
Distance Recognition Support System
(DRSS) ..................................... 4-108
Forward Sensing Camera
(FSC) ........................................ 4-134
High Beam Control System
(HBC) ........................................ 4-93
Lane Departure Warning System
(LDWS) ..................................... 4-96
Laser sensor (front) .................. 4-140
Mazda Radar Cruise Control
(MRCC) ................................... 4-116
Pre-crash safety technology ........ 4-90
Radar sensor (front) ................. 4-137
Radar sensors (rear) ................. 4-142
Rear Cross Traffic Alert
(RCTA) ..................................... 4-111
Smart Brake Support (SBS) ..... 4-131
Smart City Brake Support
(SCBS) ..................................... 4-126
Ignition
Switch .......................................... 4-2
Illuminated Entry System ............... 5-129
Immobilizer System .......................... 3-37
I
Indicator Lights
Blind Spot Monitoring
(BSM) OFF ................................ 4-45
Brake pedal operation demand ... 4-29
Cruise ......................................... 4-44
Hazard warning .......................... 4-43
HBC ........................................... 4-41
Headlight high-beam .................. 4-43
KEY ............................................ 4-39
LDWS ........................................ 4-31
LDWS OFF ................................ 4-32
Lights-on .................................... 4-45
Low engine coolant
temperature ................................ 4-42
Mazda Radar Cruise Control
(MRCC) ..................................... 4-44
Power steering malfunction ........ 4-33
Security ...................................... 4-44
Select mode ................................ 4-43
Shift position .............................. 4-43
Smart City Brake Support
(SCBS) ....................................... 4-42
Smart City Brake Support
(SCBS) OFF ............................... 4-42
TCS OFF .................................... 4-42
TCS/DSC ................................... 4-41
Turn signal ................................. 4-43
Inspecting Brake/Clutch Fluid
Level ................................................. 6-31
Inspecting Coolant Level .................. 6-29
Inspecting Engine Oil Level ............. 6-28
Inspecting Washer Fluid Level ......... 6-31
Instrument Cluster ............................. 4-10
Index
10-5
CX-5_8DV2-EA-14K_Edition3 Page621
Thursday, February 26 2015 5:35 PM
Form No.8DV2-EA-14K

Black plate (625,1)
W
Warning Lights
ABS ............................................ 4-28
Air bag system ........................... 4-34
Automatic transaxle ................... 4-33
AWD .......................................... 4-32
Brake system .............................. 4-27
Charging system ......................... 4-29
Check engine .............................. 4-30
Check fuel cap ........................... 4-35
Door-ajar .................................... 4-36
Electric parking brake ................ 4-29
Engine oil ................................... 4-30
Front seat belt pretensioner
system ........................................ 4-34
HBC ........................................... 4-41
High engine coolant
temperature ................................ 4-31
KEY ............................................ 4-39
LDWS ........................................ 4-31
LED headlight ............................ 4-46
Low fuel ..................................... 4-35
Low washer fluid level ............... 4-37
Mazda Radar Cruise Control
(MRCC) ..................................... 4-44
Seat belt ...................................... 4-35
Tire pressure monitoring
system ........................................ 4-37
Warning/Buzzer ................................ 7-23
Warranty ............................................ 8-16
Weights ............................................... 9-5
Windows
Power windows .......................... 3-32
Windshield Washer ........................... 4-68
Windshield Wipers ............................ 4-65
Winter Driving .................................. 3-44
W
Wiper
Replacing Rear Window Wiper
Blade .......................................... 6-34
Replacing Windshield Wiper
Blades ........................................ 6-33
Index
10-9
CX-5_8DV2-EA-14K_Edition3 Page625
Thursday, February 26 2015 5:35 PM
Form No.8DV2-EA-14K