2016 MAZDA MODEL 6 light

Black plate (8,1)
Interior Equipment (View A)
Door-lock knob .................................................................................................. page 3-18
Lighting control ................................................................................................. page 4-58
Turn and lane-change signal .............................................................................. page 4-63
Wiper and washer lever ..................................................................................... page 4-64
Tire pressure monitoring system set switch ..................................................... page 4-151
DSC OFF switch ............................................................................................... page 4-82
LDWS switch .................................................................................................. page 4-101
Blind Spot Monitoring (BSM) switch ............................................................. page 4-108
Outside mirror switch ........................................................................................ page 3-30
Door-lock switch ............................................................................................... page 3-15
Power window lock switch ................................................................................ page 3-35
Power window switches .................................................................................... page 3-33
1-2
Pictorial Index
The equipment and installation position varies by vehicle
Interior Overview
Mazda6_8EA2-EA-14K_Edition2 Page8
Saturday, January 10 2015 3:24 PM
Form No.8EA2-EA-14K

Black plate (11,1)
Interior Equipment (View C)
Seat belts ............................................................................................................ page 2-15
SRS air bag ........................................................................................................ page 2-41
Bottle holder .................................................................................................... page 5-132
Sunvisor ........................................................................................................... page 5-127
Vanity mirror .................................................................................................... page 5-127
Overhead lights ................................................................................................ page 5-128
Moonroof switch ............................................................................................... page 3-36
Rearview mirror ................................................................................................. page 3-31
Cup holders ...................................................................................................... page 5-131
External input terminal ...................................................................................... page 5-52
Accessory sockets ............................................................................................ page 5-130
Front seat ............................................................................................................. page 2-5
Center console ................................................................................................. page 5-134
Rear seat ............................................................................................................ page 2-10
Seat warmer switches .......................................................................................... page 2-7
Pictorial Index
Interior Overview
1-5The equipment and installation position varies by vehicle Mazda6_8EA2-EA-14K_Edition2 Page11
Saturday, January 10 2015 3:24 PM
Form No.8EA2-EA-14K

Black plate (12,1)
Hood .................................................................................................................. page 6-24
Windshield wiper blades .................................................................................... page 6-33
Moonroof ........................................................................................................... page 3-36
Doors and keys .................................................................................................. page 3-12
Fuel-filler lid ...................................................................................................... page 3-27
Wheels and Tires ............................................................................................... page 6-40
Exterior lights .................................................................................................... page 6-46
Trunk lid ............................................................................................................ page 3-19
Child safety locks .............................................................................................. page 3-19
Outside mirror .................................................................................................... page 3-30
1-6
Pictorial Index
The equipment and installation position varies by vehicle
Exterior Overview
Mazda6_8EA2-EA-14K_Edition2 Page12
Saturday, January 10 2015 3:24 PM
Form No.8EA2-EA-14K

Black plate (18,1)
Seat Recline
(Manual Seat)
To change the seatback angle, lean forward slightly while raising the lever. Then lean back
to the desired position and release the lever.
Make sure the lever returns to its original position and the seatback is locked in place by
attempting to push it forward and backward.
(Power Seat)
To change the seatback angle, press the front or rear side of the reclining switch. Release
the switch at the desired position.
Lumbar Support Adjustment (Driver's Seat)
(Manual Operation)
To increase the seat firmness, push the lever forward. Pull the lever backward to decrease
firmness.
(Power Operation)
To increase the seat firmness, press and hold the front part of the switch to the desired
position, then release it.
Press the rear part of the switch to decrease firmness.
2-6
Essential Safety Equipment
Seats
Mazda6_8EA2-EA-14K_Edition2 Page18
Saturday, January 10 2015 3:24 PM
Form No.8EA2-EA-14K

Black plate (19,1)
qSeat Warmerí
The seats are electrically heated. The
ignition must be switched ON.
Press the seat warmer switch to illuminate
the indicator light while the ignition is
switched ON. The mode changes as
follow each time the seat warmer switch is
pressed.
Front
OFF
High
Mid
Low
Rearí
OFF
High
Mid
Low
WARNING
Be careful when using the seat warmer:
The heat from the seat warmer may
be too hot for some people, as
indicated below, and could cause a
low-temperature burn.
ØInfants, small babies, elderly
people, and physically challenged
people
ØPeople with delicate skin
ØPeople who are excessively
fatigued
ØPeople who are intoxicated
ØPeople who have taken sleep-
inducing medicine such as
sleeping pills or cold medicine
Do not use the seat warmer with
anything having high moisture-
retention ability such as a blanket or
cushion on the seat:
The seat may be heated excessively
and cause a low-temperature burn.
Do not use the seat warmer even when
taking a short nap in the vehicle:
The seat may be heated excessively
and cause a low-temperature burn.
Do not place heavy objects with sharp
projections on the seat, or insert
needles or pins into it:
This could cause the seat to become
excessively heated and result in injury
from a minor burn.
Essential Safety Equipment
Seats
2-7íSome models. Mazda6_8EA2-EA-14K_Edition2 Page19
Saturday, January 10 2015 3:24 PM
Form No.8EA2-EA-14K

Black plate (31,1)
Seat Belt Warning Systems
If it detects that the driver's seat belt is
unfastened, the warning light or beep
alerts the driver.
Refer to Warning/Indicator Lights on page
4-22.
Front Seat Belt Pretensioner
and Load Limiting Systems
For optimum protection, the driver and
front passenger seat belts are equipped
with pretensioner and load limiting
systems. For both these systems to work
properly you must wear the seat belt
properly.
Pretensioners:
In moderate or severe frontal or near-
frontal accidents, the front air bag and
pretensioner systems deploy
simultaneously.
For deployment details, refer to the SRS
Air Bag Deployment Criteria (page 2-54).
The front seat belt retractors remove slack
quickly as the air bags are expanding.
Any time the air bags and seat belt
pretensioners have fired they must be
replaced.
A system malfunction or operation
conditions are indicated by a warning.
Refer to Warning/Indicator Lights on page
4-22.
Refer to Air Bag/Front Seat Belt
Pretensioner System Warning Beep on
page 7-34.
(With Front Passenger Occupant
Classification System)
In addition, the pretensioner system for
the front passenger, like the front and side
passenger air bag, is designed to only
deploy when the front passenger occupant
classification sensor detects a passenger
sitting on the front passenger's seat.
For details, refer to the front passenger
occupant classification sensor (page
2-57).
Essential Safety Equipment
Seat Belt Systems
2-19
Mazda6_8EA2-EA-14K_Edition2 Page31
Saturday, January 10 2015 3:24 PM
Form No.8EA2-EA-14K

Black plate (33,1)
NOTElThe pretensioner system will activate in a
moderate or greater frontal or near-frontal,
or a severe side collision. It will not
activate in most rollovers, rear impacts.
(With Front Passenger Occupant
Classification System)
The pretensioner system will activate in a
severe roll-over accident.
In addition, the pretensioner system for the
front passenger is designed to only deploy
when the front passenger occupant
classification sensor detects a passenger
sitting on the front passenger's seat.
lSome smoke (non-toxic gas) will be
released when the air bags and
pretensioners deploy. This does not indicate
a fire. This gas normally has no effect on
occupants, however, those with sensitive
skin may experience light skin irritation. If
residue from the deployment of the air bags
or the front pretensioner system gets on the
skin or in the eyes, wash it off as soon as
possible.
Seat Belt Extender
If your seat belt is not long enough, even
when fully extended, a seat belt extender
may be available to you at no charge from
your Authorized Mazda Dealer.
This extender will be only for you and for
the particular vehicle and seat. Even if it
plugs into other seat belts, it may not hold
in the critical moment of a crash.
When ordering an extender, only order
one that provides the necessary additional
length to fasten the seat belt properly.
Please contact your Authorized Mazda
Dealer for more information.
WARNING
Do not use a seat belt extender unless
it is necessary:
Using a seat belt extender when not
necessary is dangerous. The seat belt
will be too long and not fit properly.
In an accident, the seat belt will not
provide adequate protection and you
could be seriously injured. Only use
the extender when it is required to
fasten the seat belt properly.
Essential Safety Equipment
Seat Belt Systems
2-21
Mazda6_8EA2-EA-14K_Edition2 Page33
Saturday, January 10 2015 3:24 PM
Form No.8EA2-EA-14K

Black plate (34,1)
Do not use an improper extender:
Using a seat belt extender that is for
another person or a different vehicle
or seat is dangerous. The seat belt
will not provide adequate protection
and the user could be seriously
injured in an accident. Only use the
extender provided for you and for the
particular vehicle and seat. NEVER
use the extender in a different vehicle
or seat. If you sell your Mazda, do
not leave your seat belt extender in
the vehicle. It could be used
accidentally by the new owner of the
vehicle. After removing the seat belt
extender, discard it. Never use the
seat belt extender in any other
vehicle you may own in the future.
Do not use an extender that is too
long:
Using an extender that is too long is
dangerous. The seat belt will not fit
properly. In an accident, the seat belt
will not provide adequate protection
and you could be seriously injured.
Do not use the extender or choose
one shorter in length if the distance
between the extender's buckle and
the center of the user's body is less
than 15 cm (6 in).Do not leave a seat belt extender
connected to the buckle:
Leaving a seat belt extender
connected to the buckle without
using the seat belt is dangerous.
When the seat belt extender is
connected to the driver's seat belt
buckle (or front passenger) seat, the
SRS driver's (or front passenger's) air
bag system will determine that the
driver (or front passenger) is wearing
the seat belt even if the driver (or
front passenger) is not wearing it.
This condition could cause the
driver's (or front passenger's) air bag
to not activate correctly and result in
death or serious injury in the event of
collision. Always wear the seat belt
with the seat belt extender.
Do not use the seat belt extender when
installing a child-restraint system on
the front or rear passenger seat:
Using a seat belt extender to fasten a
child-restraint system on any seat is
dangerous. Always follow the child-
restraint system manufacturer's
installation instructions and never
use a seat belt extender.
NOTE
When not in use, remove the seat belt extender
and store it in the vehicle. If the seat belt
extender is left connected, the seat belt
extender might get damaged as it will not
retract with the rest of the seat belt and can
easily fall out of the door when not in use and
be damaged. In addition, the seat belt warning
light will not illuminate and function properly.
2-22
Essential Safety Equipment
Seat Belt Systems
Mazda6_8EA2-EA-14K_Edition2 Page34
Saturday, January 10 2015 3:24 PM
Form No.8EA2-EA-14K