2016 LEXUS RX450H light

932. Instrument cluster
2
Instrument cluster
RX450h_U_OM0E013U Warning lights inform the driver of malfun ctions in any of the vehicle’s systems.
Warning lights * 1
(U.S.A.)
Brake system warning light
(  P. 5 3 6 )
* 1
(Canada)
ABS warning light
(  P. 5 3 7 )
* 1
(Canada)
Brake system warning light
(  P. 5 3 6 )
* 2
(U.S.A.)
Parking brake indicator
(  P. 5 3 7 )
* 1
Brake system warning light
(  P. 5 3 6 )
* 2
(Canada)
Parking brake indicator
(  P. 5 3 7 )
* 1
(if equipped)
Charging system warning
light (  P. 5 3 6 ) * 1, 2
Brake hold operated
indicator (  P. 5 3 7 )
* 1
(U.S.A.)
Malfunction indicator lamp
(  P. 5 3 6 ) * 1
Electric power steering
system warning light
(  P. 5 3 7 )
* 1
(Canada)
Malfunction indicator lamp
(  P. 5 3 6 ) * 1
Electric power steering
system warning light
(  P. 5 3 7 )
* 1
SRS warning light
(  P. 5 3 6 ) (if equipped)
LDA indicator (  P. 5 3 7 )
LKA indicator (  P. 5 3 7 )
* 1
(U.S.A.)
ABS warning light
(  P. 5 3 7 ) * 1
Slip indicator (  P. 5 3 7 )

94 2. Instrument cluster
RX450h_U_OM0E013U * 1
: These lights turn on when the power switch is turned to ON mode to indicate that a
system check is being performed. They will turn off after the hybrid system is on, or
after a few seconds. There may be a malfunctio n in a system if the lights do not turn on,
or turn off. Have the vehicle inspected by your Lexus dealer.
* 2
: The light flashes to indicate a malfunction.
The indicators inform the driver of the op erating state of the vehicle’s various sys-
tems. * 1, 2
(if equipped)
PCS warning light
(  P. 5 3 8 )
* 1
Tire pressure warning light
(  P. 5 3 8 )
Low fuel level warning light
(  P. 5 3 8 )
* 1
Master warning light
(  P. 5 3 8 )
Seat belt reminder light
(  P. 5 3 8 )
Indicators Turn signal indicator
(  P. 2 4 4 ) Cruise control indicator
(  P. 311, 323, 335)
(U.S.A.)
Headlight indicator
(  P. 2 5 1 ) (if equipped)
Radar cruise control
indicator (  P. 311, 323)
(Canada)
Tail light indicator
(  P. 2 5 1 ) Cruise control “SET”
indicator
(  P. 311, 323, 335)
Headlight high beam
indicator (  P. 252) (if equipped)
LDA indicator (  P. 3 0 2 )
LKA indicator (  P. 2 9 2 )
* 1
(if equipped) Automatic High Beam
indicator (  P. 2 5 5 ) (if equipped)
LDA indicator (  P. 3 0 2 )
LKA indicator (  P. 2 9 2 )
Fog light indicator
(  P. 2 5 9 ) * 4
(if equipped)LDA indicator (  P. 3 0 2 )
LKA indicator (  P. 2 9 2 )

952. Instrument cluster
2
Instrument cluster
RX450h_U_OM0E013U ●
Drive mode indicators 
Except F SPORT models Intuitive parking assist
indicator (  P. 3 3 9 ) (Canada)
Parking brake indicator
(  P. 2 4 5 )
“BSM” indicator (  P. 363)
* 1
Brake hold standby
indicator (  P. 2 4 9 )
“RCTA” indicator
(  P. 363)
* 1
Brake hold operated
indicator (  P. 2 4 9 )
* 2, 3
BSM outside rear view
mirror indicators (  P. 363) EV indicator (  P. 7 8 )
* 1, 4
Slip indicator (  P. 383)
* 6
Security indicator
(  P. 8 5 , 8 7 )
* 1, 5
VSC OFF indicator
(  P. 3 8 4 ) “READY” indicator
(  P. 232)
* 1, 5
(if equipped)
PCS warning light
(  P. 2 8 3 ) * 7
Low outside temperature
indicator (  P. 9 7 )
(U.S.A.)
Parking brake indicator
(  P. 245, 246) * 1, 6
“A I R B A G O N / O F F ”
indicator (  P. 51)
Eco drive mode indicator
(  P. 377) “SPORT” indicator
(  P. 377)
EV drive mode indicator
(  P. 2 3 7 )

96 2. Instrument cluster
RX450h_U_OM0E013U 
F SPORT models
* 1
: These lights turn on when the power switch is turned to the ON mode to indicate that
a system check is being performed. They will turn off after the hybrid system is on, or
after a few seconds. There may be a malfunctio n in a system if the lights do not turn on,
or turn off. Have the vehicle inspected by your Lexus dealer.
* 2
: In order to confirm operation, the BSM outside rear view mirror indicators illuminate
in the following situations:
• When the BSM function is enabled on of the multi-information display, the
power switch is turned to ON mode.
• When the power switch is in ON mode, th e BSM function is enabled on of the
multi-information display.
If the system is functioning correctly, the BSM outside rear view mirror indicators will
turn off after a few seconds.
If the BSM outside rear view mirror indica tors do not illuminate or do not turn off,
there may be a malfunction in the system.
If this occurs, have the vehicle inspected by your Lexus dealer.
* 3
: This light illuminates on the outside rear view mirrors.
* 4
: The light flashes to indicate that the system is operating.
* 5
: The light comes on when the system is turned off.
* 6
: This light illuminates on the center panel.
* 7
: When the outside temperature is approximately 37  F (3  C) or lower, the indicator
will flash for approximately 10 seconds, then stay on.Eco drive mode indicator
(  P. 377) “SPORT S” indicator
(  P. 377)
“SPORT S+” indicator
(  P. 377) “CUSTOMIZE” indicator
(  P. 377)
EV drive mode indicator
(  P. 2 3 7 )
WA R N I N G ■
If a safety system warning light does not come on
Should a safety system light such as the ABS and SRS warning light not come on when
you start the hybrid system, this could mean that these systems are not available to help
protect you in an accident, which could result in death or serious injury. Have the vehi-
cle inspected by your Lexus dealer immediately if this occurs.

992. Instrument cluster
2
Instrument cluster
RX450h_U_OM0E013U ■
Rev indicator (F SPORT models)
When the engine reaches a set
speed, a ring-shaped indicator will
be displayed on the tachometer. The desired engine speed at which
the Rev indicator will begin to be dis-
played can be set on of the multi-
information display. (  P. 1 0 9 )
■
Rev peak (F SPORT models)
The engine speed reaches or
exceeds 4000 rpm, an afterimage
of the tachometer will be displayed
at the highest engine speed for
approximately 1 second.
The brightness of the instrument panel lights can be adjusted.
Darker
Brighter • The brightness of the instrument
panel lights can be adjusted individu-
ally for day mode and night mode
* .
• If the brightness is adjusted when the
surroundings are bright and the tail
lights are on (day mode brightness
adjustment), the brightness level of
night mode will be adjusted at the
same time.
* : Day mode and night mode:  P. 1 0 1Instrument panel light control 1
2

1012. Instrument cluster
2
Instrument cluster
RX450h_U_OM0E013U ■
Tachometer
Hybrid System Indicator switches to the tachometer when driving mode is in sport mode.
The settings of the tachometer display can be changed on of the multi-information
display. (  P. 1 0 9 )■
Engine speed
On hybrid vehicles, engine speed is precisely controlled in order to help improve fuel
efficiency and reduce exhaust emissions etc.
There are times when the engine speed that is displayed may differ even when vehicle
operation and driving conditions are the same. ■
Brightness of the meters (day mode and night mode)
The brightness of the meters is changed between day mode and night mode. ●
Day mode: When the tail lights are off or when the tail lights are on but the surrounding
area is bright ●
Night mode: When the tail lights are on and the surrounding area is dark ■
Outside temperature display ●
In the following situations, the correct outside temperature may not be displayed, or the
display may take longer than normal to change.
• When stopped, or driving at low speeds (less than 12 mph [20 km/h])
• When the outside temperature has changed suddenly (at the entrance/exit of a
garage, tunnel, etc.) ●
When “  ” or “E” is displayed, the sy stem may be ma lfunctioning.
Take your vehicle to your Lexus dealer. ■
Clock settings screen
If the clock adjustment screen is displayed continuously when attempting to change the
clock settings, the system may be malfunctioning.
Have the vehicle inspected by your Lexus dealer. ■
Customization
Some functions can be customized. (  P. 1 0 9 )
NOTICE ■
To prevent damage to the engine and its components ●
Do not let the indicator needle of the tachometer enter the red zone, which indicates
the maximum engine speed. ●
The engine may be overheating if the engine coolant temperature gauge is in the red
zone (H). In this case, immediately stop the vehicle in a safe place, and check the
engine after it has cooled completely. (  P. 5 74 )

116 2. Instrument cluster
RX450h_U_OM0E013U Displays suggestions to the driver in the following situations. To select a response
to a displayed suggestion, use the meter control switches. The suggestion function can be turn ed on/off. (Customizable features:  P. 6 0 7 )■
Suggestion to enable the power back door
If the power back door system is disabled (setting on set to off) and the
power back door switch on the instru ment panel is operated, a suggestion
message will be displayed asking if yo u wish to enable the power back door
system. To enable the power back door system, select “Yes”. After enabling the power back door syst em, press the power back door switch
again to open or close the power back door.■
Suggestion to turn off the headlights
If the headlights are left on for a certain amount of time after the power switch
has been turned off, a suggestion message will be displayed asking if you wish
to turn the headlights off. To turn the headlights off, select “Yes”.If a front door is opened after the power sw itch is turned off, this suggestion mes-
sage will not be displayed.■
Background color of the indicator/shift position display area (except F SPORT models)
The background color of the indicator/shift position display area is changed according to
the driving mode as follows (  P. 377):●
Eco drive mode: Blue ●
Sport mode: Red ■
G-force display (if equipped) ●
The G-force values may not be zero even when the vehicle is parked, such as when it is
parked on an incline. ●
Depending on the vehicle usage conditions, the brake fluid pressure display may not
reach its maximum reading even though the brake pedal is fully depressed.●
If a 12-volt battery terminal is disconnected and reconnected, the steering amount dis-
play may be disabled temporarily. After driv ing the vehicle for a while, the display will
be enabled. ■
Suspension of the settings display ●
Some settings cannot be changed while driv ing. When changing settings, park the
vehicle in a safe place. ●
If a warning message is displayed, operation of the settings displa y will be suspended.Suggestion function

1172. Instrument cluster
2
Instrument cluster
RX450h_U_OM0E013U ■
Tire pressure ●
It may take a few minutes to display the tire inflation pressure after the power switch is
turned to ON mode. It may also take a few minutes to display the tire inflation pressure
after inflation pressure has been adjusted. ●
“---” may be displayed if the tire position information cannot be determined due to
unfavorable radio wave conditions. ●
Tire inflation pressure changes with temperat ure. The displayed values may also be dif-
ferent from the values measured using a tire pressure gauge.■
Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is characteristic
of liquid crystal displays, and there is no problem continuing to use the display.■
Customization
Some functions can be customized. (  P. 1 0 9 , 6 0 7 )
WA R N I N G ■
Caution for use while driving ●
When operating the multi-information display while driving, pay extra attention to the
safety of the area around the vehicle. ●
Do not look continuously at the multi-info rmation display while driving as you may fail
to see pedestrians, objects on the road, etc. ahead of the vehicle. ■
The information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal information
display. At extremely low temperatures, th e information display monitor may respond
slowly, and display changes may be delayed.
For example, there is a lag between the driver’s shifting and the new gear number
appearing on the display. This lag could cau se the driver to downshift again, causing
rapid and excessive engine braking and po ssibly an accident resulting in death or
injury. ■
Cautions during setting up the display
As the hybrid system needs to be operating during setting up the display, ensure that
the vehicle is parked in a place with adequate ventilation. In a closed area such as a
garage, exhaust gases includin g harmful carbon monoxide (CO) may collect and enter
the vehicle. This may lead to death or a serious health hazard.
NOTICE ■
While setting up the display
To prevent 12-volt battery discharge, ensure that the hybrid syst em is operating while
setting up the display features.