2016 LEXUS IS250 Owners Manual

218
3-1. Using the air conditioning system and defogger
Rear window and outside re ar view mirror defoggers
nThe defogger can be operated when
The “ENGINE START STOP” switch is in IGNITION ON mode.
CAUTION
nWhen the outside rear view mirror defoggers are on
Do not touch the outside surface of the rear view mirror, as it can become very hot
and burn you.
These features are used to defog the rear window, and to remove rain-
drops, dew and frost from the outside rear view mirrors.
On/off
The defoggers will automatically
turn off after approximately 15
minutes.

219
3

Interior features
3-2. Using the audio system
Audio system type
With navigation system
Owners of models equipped with a navigation system should refer to
the “Navigation System Owner's Manual”.
Without navigation system (type A)
CD player with changer and AM/FM radio
Without navigation system (type B)
CD player with changer and AM/FM radio

220
3-2. Using the audio system
nUsing cellular phones
Interference may be heard through the audio system’s speakers if a cellular phone is
being used inside or close to the vehicle while the audio system is operating.
CAUTION
nFor vehicles sold in U.S.A. and Canada
lPa r t 1 5 o f t h e F CC Ru l e s
FCC Warning:
Any unauthorized changes or modifications to this equipment will void the user’s
authority to operate this device.
lLaser products

221
3-2. Using the audio system
3

Interior features
NOTICE
nTo prevent battery discharge
Do not leave the audio system on longer than necessary with the engine off.
nTo avoid damaging the audio system
Take care not to spill drinks or other fluids over the audio system.

222
3-2. Using the audio system
Using the radio
Setting station presets (excluding XM® Satellite Radio)
Search for desired stations by turning or pressing “∧” or
“∨” on .
Press and hold the button (from to ) the station is to
be set to until you hear a beep.
Scanning radio stations (excluding XM® Satellite Radio)
nScanning the preset radio stations
Press and hold until you hear a beep.
Preset stations will be played for 5 seconds each.
When the desired station is reached, press once again.
Seeking any traffic
program station
Station
selector Displays radio text messages
Pow e r Vo l u m e
Scans for receivable stations
Seeking the
frequencyChanging the program types
Adjusting the frequency
(AM, FM mode) or
channel (SAT mode)
AM⋅SAT/FM
mode buttons
STEP1
STEP2
STEP1
STEP2

223
3-2. Using the audio system
3

Interior features
nScanning all radio stations within range
Press .
All stations with reception will be played for 5 seconds each.
When the desired station is reached, press once again.
RDS (Radio Data System)
This feature allows your radio to receive station identification information
and program information (classical, jazz, etc.) from radio stations which
broadcast this information.
nReceiving RDS broadcasts
Press “∧” or “∨” on during FM reception.
The type of program changes each time is pressed.
lROCK
lEASYLIS (Easy listening)
lCLS/JAZZ (Classical music and Jazz)
lR & B (Rhythm and Blues)
lINFORM (Information)
lRELIGION
lMISC (Miscellaneous)
lALERT (Emergency messages)
If the system receives no RDS stations, “NO PTY” appears on the dis-
play.
Press , or “∧” or “∨” on .
The radio seeks or scans the station by the relevant program type.
STEP1
STEP2
STEP1
STEP1

224
3-2. Using the audio system
nDisplaying radio station names
Press .
nDisplaying radio text messages
Press twice.
If MSG shows in the display, a text message will be displayed.
If the text continues past the end of the display, is displayed. Press and
hold until you hear a beep.
XM® Satellite Radio (if equipped)
nReceiving XM® Satellite Radio
Press .
The display changes as follows each time is pressed.
AM → SAT1 → SAT2 → SAT3
Turn to select the desired channel in the all categories or
press “∧” or “∨” on to select the desired channel in the cur-
rent category.
nSetting XM® Satellite Radio channel presets
Select the desired channel. Press the button the channel is to be set to
(from to ), and you hear a beep.
nChanging the channel category
Press “∧” or “∨” on .
STEP1
STEP2

225
3-2. Using the audio system
3

Interior features
nScanning XM® Satellite Radio channels
lScanning channels in the current category
Press .
When the desired channel is reached, press again.
lScanning preset channels
Press and hold until you hear a beep.
When the desired channel is reached, press again.
nDisplaying text information
Press .
The display will show up to 10 characters.
The display changes as follows each time is pressed.
lCH NAME
lTITLE (SONG/PROGRAM TITLE)
lNAME (ARTIST NAME/FEATURE)
lCH NUMBER
STEP1
STEP2
STEP1
STEP2