2016 Lexus ES350 rear view mirror

4
ES350_QG_OM33B82U_(U)
Outside Rear View Mirrors....................................................................... 21
Portable Audio Device Ports ...................................................................... 87
Power Windows .......................................................................................... 98
Rear Sunshade/Rear Door Sunshades ...................................................... 88
Remote Touch (with navigation system) ................................................... 48
Seat Heaters and Ventilators ..................................................................... 87
Smart Access System with Push-button Start .......................................... 15
Theft Deterrent System .............................................................................. 16
Tire Pressure Warning System .................................................................. 47
Tr u n k ......................................................................................................... 102
Trunk Storage Extension ............................................................................ 89
Turn Signal Lever ....................................................................................... 27
Voice Command System
Basic operation ......................................................................................... 82
Command list ........................................................................................... 83
Windshield Wipers and Washer ................................................................ 34
XM Satellite Radio ...................................................................................... 96

7
ES350_QG_OM33B82U_(U)
OverviewInstrument Panel
Odometer/trip meter and trip meter reset button*
Instrument panel light control switches*
Outside rear view mirror switches P.21
Intuitive parking assistswitch
∗
P.44
BSM (Blind Spot Monitor) main switch
∗
P.45
Automatic High Beam switch∗
P.32

19
ES350_QG_OM33B82U_(U)
Driving Position Memory (if equipped)
nDriving position memory
n
Recording procedure
Check that the shift lever is in P.
Turn the engine switch to IGNITION ON mode.
Adjust the driver’s seat, steering wheel, and outside rear view mirrors to the
desired positions.
While pressing the “SET” button, or
within 3 seconds af ter the “SET” button
is pressed, press button “1”, “2” or “3”
until the buzzer sounds. If the selected button has already
been preset, the previously recorded
position will be overwritten.
nRecall procedure
Check that the shift lever is in P.
Turn the engine switch to IGNITION ON mode.
Press one of the buttons for the driving
position you want to recall until the
buzzer sounds.
This feature automatically adjusts the front seats, steering wheel (power adjust-
ment type) and outside rear view mirrors to suit your preferences.
1
2
3
4
1
2
3

21
ES350_QG_OM33B82U_(U)
Outside Rear View Mirrors
Selects a mirror to adjust (“L”: left
or “R”: right)
Adjust the mirror up, down, in or
out using the switch
nFolding the mirrors
Push the mirror back in the direction of
the vehicle’s rear.
n Linked mirror function when reversing
When the mirror select switch is in the L or R position, the outside rear view mirrors
will automatically angle downwards when the vehicle is reversing in order to give a
better view of the ground.
To disable this function, move the mirror select switch to the neutral position
(between L and R).
nAdjusting the mirror angle when the vehicle is reversing
With the shift lever in R, adjust the mirror angle at a desired position. The adjusted
angle will be memorized and the mirror will automatically tilt to the memorized
angle whenever the shift lever is shifted to R from next time.
The memorized downward tilt position of the mirror is linked to the normal posi-
tion (angle adjusted with the shift lever in other than R). Therefore, if the normal
position is changed after adjustment, the tilt position will also change. When the
normal position is changed, readjust the angle in reversing.
1
2

46
ES350_QG_OM33B82U_(U)
BSM (Blind Spot Monitor) (if equipped)
BSM main switch
Pressing the switch turns the system on or off. When the switch is set to on, the
switch’s indicator illuminates. Common switch for Blind Spot Monitor function
and Rear Cross Traffic Alert function.
Outside rear view mirror indicator
Blind Spot Monitor function:
When a vehicle is detected in the blind spot, the outside rear view mirror indi-
cator comes on while the tu rn signal lever is not operated and the outside rear
view mirror indicator fl ashes while the turn signal lever is operated.
Rear Cross Traffic Alert function:
When a vehicle approaching from the ri ght or left rear of the vehicle is
detected, the outside rear view mirror indicators flash.
Rear Cross Traffic Alert function buzzer (Rear Cross Traffic Alert function
only)
When a vehicle approaching from the ri ght or left rear of the vehicle is
detected, a buzzer sounds from behind the rear seat.
The Blind Spot Monitor is a system that has 2 functions;
l The Blind Spot Monitor function Assists the driver in making th e decision when changing lanes
l The Rear Cross Traffic Alert function Assists the driver when backing up
These functions use same sensors.
1
2
3