2016 KIA SPORTAGE Features and Functions Guide

23
Automatic Gear Shift with Sportmatic® Shifting
P: Park
R: Reverse
N: Neutral
D: Drive
Sport Mode:
To enter Sport mode, move shift lever from D to left gate
To shift while in Sport mode, move shift lever up [+] to upshift or down [–] to downshift .
•
•Press brake pedal and depress release button to move gear shift from N to P, N to R or from P to any gear •Sport mode downshifts are made automatically when the vehicle slows down . When the vehicle stops, 1st gear is automatically selected
4WD Transfer Mode
Press the 4WD Transfer Mode selector
button [A] to activate or deactivate 4WD
Lock mode .
4WD Lock Mode (Indicator is lit):
Activates 4WD for climbing or descending sharp grades, off-road driving, driving on sandy
and muddy roads, etc . , to maximize traction .
4WD Auto Mode (Indicator not lit; 4WD Lock is deactivated):
The vehicle operates similar to conventional 2WD vehicles . If the system determines that
there is a need for the 4WD mode, the engine’s driving power is distributed to all four
wheels automatically without driver intervention .
[+]: Sport Mode Upshift
[–]: Sport Mode Downshift
(Located near shifter)
Sportmatic® Shifting Video To view a video on your mobile device, snap this QR Code or visit the listed website .
Refer to page 2 for more information .
www.KuTechVideos.com/sl13/2016
QR CODE
QUICK TIPS
A
A
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
CENTER PANEL

24
Heated and Ventilated Seats Video To view a video on your mobile device, snap this QR Code or visit the listed website .
Refer to page 2 for more information .
www.KuTechVideos.com/sl13/2016
QR CODESeat Warmers*Seat Warmers / Ventilated Seats*
Press button once for high setting (2 LEDs lit) [A], again
for low setting (1 LED lit) [B] and again to turn OFF .
Seat Warmers — Press top of button [C] once for high
setting (2 LEDs lit), again for low setting (1 LED lit) and
again to turn OFF .
Ventilated Seats — Press bottom of button [D] once
for high setting (2 LEDs lit), again for low setting (1 LED
lit) and again to turn OFF .
•
•System turns OFF when ignition is cycled . To turn system ON, press the seat warmer switch •With the seat warmer switch in the ON position, the heating system in the seat turns off or on automatically depending on the seat temperature
QUICK TIPS
(Located on either side of gear shift)
AB
(Located on either side of gear shift)
Warming - Yellow LED
C
Ventilating - Blue LED
D
D
C
B
A
SPORTAGE FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
CENTER PANEL

25
Power Adjustable Driver’s Seat*
Move/Press controls to adjust Seat forward/backward, Seat Cushion height, Seatback recline or Lumbar forward/backward .
SeatbackLumbarSeatSeat Cushion
AA
A
B
B
C
C
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
SEATING

26
When adjusting seat forward or backwards, ensure seat clicks or locks into place before driving the vehicle .
To recline the Rear Seatback:
1 . Pull lever [D] up to unlock seat
2 . Holding the lever [D] up, adjust Seatback to desired position [E]
3 . Release the lever [D] and ensure the Seatback is locked in place
REMINDER: The lever must return to its original position for the Seatback to lock .
To fold the Rear Seatback:
1 . Pull lever [D] up to unlock seat
2 . Fold Seatback flat [F]
Reclining/Folding Rear Seats (Seat type with lever in front)6-Way Manual Adjustable Driver’s Seat*
Pull lever [A] to slide Seat forward/backward
Pull/press lever [B] to adjust Seat height
Pull lever [C] to adjust Seatback recline
It may be necessary to adjust the front seatbacks to fully lower rear seats .
QUICK TIP
A
BC
F
D
E
D
D
D
D
E
F
C
B
A
QUICK TIP
SPORTAGE FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
SEATING

27
Front Seat Headrest Adjustment
To adjust headrest forward — Pull headrest forward
at an upward angle to one of several positions .
To adjust headrest back — Pull headrest completely
forward at an upward angle, then release .
To raise headrest — Pull headrest up .
To lower headrest — Press lock,
then press the headrest down .
PRESS
Front Active Headrests
To reset the headrest back — Pull forward at an
upward angle to the farthest position and release .
For easy adjustments, hold a headrest post with one hand while using the other hand to pull the headrest up from underneath .
QUICK TIP
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
SEATING

28
Smart Key Fob:
[A] Press to lock All Doors
[B] Press to unlock Driver’s Door . Press twice in 4 seconds to
unlock All Doors and Rear Hatch
[C] Press and hold to unlock Rear Hatch and manually open
REMINDER: The Rear Hatch unlocks when the Smart Key is within close proximity of the vehicle .
[D] Press and hold for more than a half-second for Panic Alarm .
To turn off Alarm, press any button
[E] Press to release Mechanical Key (Button on reverse side of fob)
REMINDERS:
• If the Smart Key battery is weak or not working properly, hold the Smart Key fob up to the ENGINE START/STOP button (Lock button side closest) and press to start engine
•Remote button configuration may vary depending on vehicle options
Smart Key*
HOLD
Driver’s Door Lock/Unlock button [F]:
•Press button once to unlock Driver’s Door
•Press again within 4 seconds to unlock All Doors
•Press again to lock All Doors
Mechanical Key [G]:
•Use to unlock /lock Driver’s Door
•Use to turn Child Safety Locks (page 35)
•Use to lock glove box
For more information on the Mechanical Key, please refer to your Owner’s Manual.
REMINDER: Remote button configuration may vary depending on vehicle options .
Engine Start/Stop Button & Smart Key Video To view a video on your mobile device, snap this QR Code or visit the listed website .
Refer to page 2 for more information .
www.KuTechVideos.com/sl13/2016
QR CODE
The Smart Key’s signal can be blocked by the normal operation of a cell or smartphone . To help prevent this, store each device separately .
QUICK TIP
A
B
C
D
E
G
F
D
E
F
G
C
B
A
SPORTAGE FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
OTHER KEY FEATURES

29
Double-Turn Lock/Unlock All
•Turn clockwise once to unlock Driver’s Door
•Turn clockwise again within 4 seconds to unlock All Doors
•Turn counterclockwise once to Lock All Doors
LockUnlock
Fuel Cap / Malfunction
Indicator (Check Engine Light)
Tighten for ONE CLICK to prevent
Malfunction Indicator from illuminating .
REMINDER: The Fuel Door Release Lever is located on the lower part of the driver’s door sill .
Remote Keyless Entry (Folding Key)*
HOLD
HOLD
[A] Press the release button to unfold the key .
[B] Press to Lock All Doors
[C] Press to unlock Driver’s Door . Press
twice in 4 seconds to unlock All Doors
and Rear Hatch
[D] Press and hold to unlock Rear Hatch
and manually open
[E] Press and hold more than 1 second for
Panic Alarm . To turn OFF Alarm, press
any button
REMINDER:
• The Rear Hatch does not automatically open when the [D] button is pressed
• The Rear Hatch unlocks when the Smart Key is within close proximity of the vehicle
• Remote button configuration may vary depending on vehicle options
One-Click Fuel Cap Video To view a video on your mobile device, snap this QR Code or visit the listed website .
Refer to page 2 for more information .
www.KuTechVideos.com/sl13/2016
QR CODE
CLICK!A
B
C
D
E
D
E
C
B
A
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
OTHER KEY FEATURES

30
How to Sync Transmitter with HomeLink®*
Erasing programmed buttons:
If programming for the first time, begin with Step 1 (repeating this step will
delete all information) .
To program non-rolling and rolling code garage door openers and other devices:
1 . Press and hold the left [A] and center [D] buttons simultaneously until the
indicator light [C] begins to flash (to reprogram buttons, skip this step)
2 . Press and hold the desired button [A], [B] or [D] and hold the button on the
transmitter while it is approximately 1 to 3 inches away from the mirror . The
HomeLink® Indicator light [C] will flash rapidly once the frequency signal has
been successfully programmed
To finish programming rolling code garage door openers, complete these steps:
3 . Locate the “learn” or “smart” button on the garage door’s motor head unit .
Press and release the button and complete Step 4 within 30 seconds
4 . Firmly press and release the programmed HomeLink® button up to three times
Press and hold the left [A] and center [D] buttons simultaneously for
approximately 20 seconds, and then release both buttons within 30 seconds .
Operating HomeLink®:
Press one of the programmed HomeLink® buttons .
REMINDER: Mirror indicator light [C] will illuminate when automatic dimming is ON .If your garage door opener was manufactured in 2011 or later, and you’re unable to program your vehicle’s HomeLink® system, you may need to purchase a HomeLink Repeater Kit. For more information, go to www.HomeLink.com or call (800) 355-3515.
The HomeLink® / Auto-Dimming Rearview Mirror* is designed to
reduce glare from a vehicle’s headlights located in the rear and also
connect up to three electronic transmitters into one location .
• To turn automatic dimming ON, press [~] button [F]
• To turn automatic dimming OFF, press [~] button [G]
HomeLink® with Auto-Dimming
Rearview Mirror*
[A] HomeLink® button
[B] HomeLink® button
[C] Indicator light
[D] HomeLink® button
[E] Glare detection sensor
[F] Automatic dimming ON
[G] Automatic dimming OFF
•
•You can reprogram a single HomeLink® button by repeating Step 2 •Erasing programmed buttons will delete all trained transmitters
QUICK TIPS
ABCDEFG
D
D
E
F
F
G
G
C
C
C
B
A
A
A
A
BD
D
SPORTAGE FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
OTHER KEY FEATURES