2016 JEEP COMPASS ignition

[x] Cancel search: ignition

Page 389 of 589

JEEP COMPASS 2016 1.G Owners Manual NOTE:The “ESC OFF” message will display and an
audible chime will sound when the shift lever is placed
into the PARK position from any other position, and then
moved out of the PARK position. This

Page 390 of 589

JEEP COMPASS 2016 1.G Owners Manual The “ESC Activation/Malfunction Indicator Light” also
flashes when TCS is active. If the “ESC Activation/
Malfunction Indicator Light” begins to flash during ac-
celeration, ease up on the acc

Page 422 of 589

JEEP COMPASS 2016 1.G Owners Manual Check TPMS Warnings
The Tire Pressure Monitoring Telltale Light will flash on
and off for 75 seconds and remain on solid when a system
fault is detected. The system fault will also sound a
chime. If t

Page 423 of 589

JEEP COMPASS 2016 1.G Owners Manual 4. For each subsequent ignition key cycle, a chime willsound and the Tire Pressure Monitoring Telltale Light
will flash on and off for 75 seconds and then remain on
solid.
5. Once you repair or replac

Page 424 of 589

JEEP COMPASS 2016 1.G Owners Manual •Various Tire Pressure Monitoring System Messages,
which display in the Electronic Vehicle Information
Center (EVIC)
• Tire Pressure Monitoring Telltale Light
Tire Pressure Monitoring Low Pressure

Page 425 of 589

JEEP COMPASS 2016 1.G Owners Manual the graphic display of the pressure value(s) will stop
flashing, and the Tire Pressure Monitoring Light will
extinguish once the updated tire pressure(s) have been
received.
NOTE:When filling warm tir

Page 426 of 589

JEEP COMPASS 2016 1.G Owners Manual text message will not be present, and a pressure value
will be displayed instead of dashes. A system fault can
occur with any of the following scenarios:
1. Jamming due to electronic devices or drivin

Page 427 of 589

JEEP COMPASS 2016 1.G Owners Manual 3. However, after driving the vehicle for up to 20 min-utes above 15 mph (24 km/h), the Tire Pressure
Monitoring Telltale Light will flash on and off for 75
seconds and then remain on solid. In additi