2016 INFINITI QX50 low beam

10
first drive features
Headlight Control Switch
HEADLIGHT CONTROL

Turn the headlight control switch to the
position
1 to turn on the front parking, side
marker, tail, license plate and instrument panel
lights. Turn the switch to the
position 2 to turn
on the headlights.
AUTOLIGHT SYSTEM

The autolight system will automatically turn the headlights on when it i\
s dark and off when
it is light. The system will keep the headlights on for a period of time\
after you turn the
ignition off and all the doors are closed.

To activate the autolight system, turn the headlight control switch to t\
he AUTO
position
3, then push the ignition switch to ON. To deactivate the autolight system,
turn the headlight control switch to the OFF,

position
1 or position 2.
HIGH BEAM SELECT

With the headlights on (either in the AUTO 3 or
position 2 ), push the headlight control
switch forward
4 to select the high beam function.
The blue indicator light
will illuminate in the
instrument panel. Pull the headlight switch back to
the original position to select the low beam. The blue indicator will ex\
tinguish.
4
5
Outside Mirror Control Switch
To select the right or left side mirror, turn the control
switch
1 right or left.

To adjust the mirror angle, move the control switch
1 up, down, right or left.

To prevent accidentally moving the mirror, turn and
set the switch to the center (neutral) position.
REVERSE TILT-DOWN FEATURE (if so equipped)

When backing up the vehicle, the right or left outside mirror can be sel\
ected to
automatically turn downward to provide better rear visibility.
1. Push the ignition switch to the ON position.
2. Move the shift lever to the R (REVERSE) position.
3. Choose the right or left outside mirror by operating the control swit\
ch
1.
4. The selected outside mirror surface will move downward.

When one of the following conditions has occurred, the outside mirror su\
rface will return to
its original position:
• The shift lever is moved to any position other than R (REVERSE).
• The outside mirror control switch is set to the center (neutral) posit\
ion.
• The ignition switch is pushed to the OFF position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
1
3
1
2
2128163_16b_QX50_US_pQRG_091515.indd 109/15/15 2:55 PM

11
Wiper and Washer Switch
Move the lever to one of the following positions to operate the windshie\
ld wipers:

1 Mist (MIST) - One sweep operation of the
front wipers.

2 Intermittent (INT) - Operates the speed-sensing
front wipers intermittently. The intermittent
operation speed can be adjusted by twisting
the time control ring
3 to increase or decrease
wiper speed.

4 Low (LO) - Front wipers operate at a continuous
low-speed.

5 High (HI) - Front wipers operate at a continuous
high-speed.

6 Front Washer - Pull the lever toward you to
activate the front washer. The front wipers will
operate several times.
WIPER DRIP

Once the wiper spray cycle is finished, there will
be a short delay. Then the wipers will sweep one more time to clear off \
any remaining drips
from the windshield.
REAR WIPER AND WASHER

7 Intermittent (INT) - Rear wiper operates
intermittently.

8 Low (ON) - Rear wiper operates at a continuous
low-speed.

9 Rear Washer - Push the lever forward to
activate the rear washer. The rear wiper will
operate several times.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
Pull and release the headlight control switch 5 to flash the headlight high beams
on and off.
FOG LIGHT SWITCH

The headlights must be in the AUTO or the
position
3 for the fog lights to operate.
Turn the switch (inside collar) to the position 6
to turn the fog lights on.

Turn the switch (inside collar) to the OFF position to
turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of
your Owner’s Manual.
6
MIST
OFF
INT
LO
HI1
2
3
4
5
INT7
ON8
6
9
2128163_16b_QX50_US_pQRG_091515.indd 119/15/15 2:55 PM