2016 HYUNDAI VELOSTER TURBO Owners Manual

Page 297 of 406

HYUNDAI VELOSTER TURBO 2016  Owners Manual 619
What to do in an emergency
The compact spare should be inflat-
ed to 420 kPa (60 psi).
✽NOTICE
Check the inflation pressure after
installing the spare tire. Adjust it to
the specified pressure,

Page 298 of 406

HYUNDAI VELOSTER TURBO 2016  Owners Manual What to do in an emergency
20 6
Jack label
1. Model Name
2. Maximum allowable load
3. When using the jack, set your
parking brake.
4. When using the jack, stop the
engine.
5. Do not get under a vehicl

Page 299 of 406

HYUNDAI VELOSTER TURBO 2016  Owners Manual 621
What to do in an emergency
IF YOU HAVE A FLAT TIRE (TIRE MOBILITY KIT, IF EQUIPPED)
For safe operation, carefully read
and follow the instructions in this
manual before use.
(1) Compressor
(2) Sea

Page 300 of 406

HYUNDAI VELOSTER TURBO 2016  Owners Manual What to do in an emergency
22 6
It is possible that some tires, espe-
cially with larger punctures or dam-
age to the sidewall, cannot be sealed
completely.
Air pressure loss in the tire may
adversely

Page 301 of 406

HYUNDAI VELOSTER TURBO 2016  Owners Manual 623
What to do in an emergency
0. Speed restriction label
1. Sealant bottle and label with
speed restriction
2. Filling hose from sealant bottle to
wheel
3. Connectors and cable for the
power outlet d

Page 302 of 406

HYUNDAI VELOSTER TURBO 2016  Owners Manual What to do in an emergency
24 6
Using the Tire Mobility Kit
1. Detach the speed restriction label
(0) from the sealant bottle (1), and
place it in a highly visible place
inside the vehicle such as on

Page 303 of 406

HYUNDAI VELOSTER TURBO 2016  Owners Manual 625
What to do in an emergency
Distributing the sealant
11. Immediately drive approximately
7~10km (4~6miles or, about
10min) to evenly distribute the
sealant in the tire.
Do not exceed a speed of 80

Page 304 of 406

HYUNDAI VELOSTER TURBO 2016  Owners Manual What to do in an emergency
26 6
Technical Data
System voltage: DC 12 V
Working voltage: DC 10 - 15 V
Amperage rating: max. 15 A
Suitable for use at temperatures:
-30 ~ +70°C (-22 ~ +158°F)
Max. work