2016 Hyundai Sonata display

5-30 I Navigation
Split Screen during Route Guidance
Approaching the turning point, the detailed
road and travel information is automatically
displayed on the right side of the screen.
Touch the button to change display
view mode as below
Details additional info can be displayed
on Freeway
Additional info of Freeway exit or Rest
area can be displayed by pressing the but-
ton
Details
Detailed information for POIs around free-
way exit is listed by pressing POI symbols.
Name Description

!Ÿ
Turn Point : Display direction
and shape to turn shortly

!Ÿ
Distance to turn : Display dis-
tance to next turn point
Road name to maneuver
Detail Distance Bar : Display dis-
tance to next turn point.
Name
Description
Display the full map screen.
Junction View, Split screen.
(Active only when images are
available)
Display Turn-by-turn information
)@-'.:@(<64"@/>
1BSUJOEE


 )@-'.:@(<64"@/>
1BSUJOEE


 

Route I 5-31
05
Route
Canceling Route
Cancel the route.
Press the
NAVI head unit key. ▶
Press
the
Route tab. ▶
Select Cancel Route .
Press the Cancel Route the icon.
Press the Yes button to cancel the route.
Display Route Information
Press the NAVI head unit key. ▶
Press
the
Route tab. ▶
Select Route Info. .
Press the Route Info. icon.
Check the information on the map. Select
the desired item to see the map informa-
tion.
Avoiding road
Click the Avoid Street button to avoid the
street or road.
Check the desired item and press the
Done button to finish.
)@-'.:@(<64"@/>
1BSUJOEE


 )@-'.:@(<64"@/>
1BSUJOEE


 

Route I 5-33
05
Editing Route
Edit the current route.
Press the
NAVI head unit key. ▶
Press
the
Route tab. ▶
Select Edit Route .
Press the Edit Route icon.
Name Description

Move to the departure location.
Move to the previous maneuver.
Move to the next maneuver.
Move to the destination location.
Touch bar to move to the specific
position

Close the route preview.
Name Description
Display the selected
point on the map
screen.
Move the selected item
up.
Move the selected item
down.
Delete the selected
item.
DonePress the button to fin-
ish editing.
Add WaypointPress the button to add
an waypoint.
)@-'.:@(<64"@/>
1BSUJOEE


 )@-'.:@(<64"@/>
1BSUJOEE


 

Navigation Settings I 5-35
05
Navigation Settings
General
Change general settings.
Press the GPS Information to display the
detail GPS satellites information
Display
Change the display environment settings.
Change the map colors and the route
guidance line colors.
Change the vehicle symbol.
Name Description

Change the unit of mile, km .
Press the
On, Off button to
change the previous destination
view setting when starting the
navigation.
Check the GPS information.
Press the Default Settings button
to initialize.
Name Description
ReceivingActive when current posi-
tion is being calculated
SpeedDisplay current speed of
the vehicle
LocationDisplay current position of
the vehicle
ElevationDisplay current elevation
of the vehicle
Time
Display time
DateDisplay date
)@-'.:@(<64"@/>
1BSUJOEE


 )@-'.:@(<64"@/>
1BSUJOEE


 

5-36 I Navigation
Guidance
Change the guidance setting.
Route
Change the route setting.
Press the On or Off button to change
the
Alternative Routes setting.

!Ÿ
Alternative on : Alternative routes will
be suggested(depending on the route
preference between “Faster time” and
“Shorter Distance”
NOTICE
Alternative routes can be shown only while
the vehicle is not moving.

!Ÿ
Alternative off : No alternative routes will
be suggested. Guidance will start right
after calculating with the route prefer-
ence (Faster time or Shorter distance)
Tr a f fi c
Change the traffic information setting.
Press the On or Off button to change the
settings.

!Ÿ
Show Traffic Information On/Off : Select
whether to display traffic information or
not

!Ÿ
Traffic Event Pop-up Freeway On/Off :
Select whether to display Pop-up mes-
sage for traffic information on freeway

!Ÿ
Traffic Event Pop-up Surface Road On/
Off : Select whether to display Pop-up
message for traffic information on sur-
face road.Name Description

Set the frequency of guidance
Route guidance is given less fre-
quently.
Guidance will be provided fre-
quently
Change whether to turn Curve
Alert on and off
Change whether to show speed
limit by pressing on and off
)@-'.:@(<64"@/>
1BSUJOEE


 )@-'.:@(<64"@/>
1BSUJOEE





Troubleshooting I 5-37
05
Troubleshooting
The current position as shown on the navigation may differ from
the actual position under the following conditions.
The following occurrences are not malfunctions :

!Ÿ
When driving on Y-shaped roads
with narrow angles the current
position may be displayed in the
opposite direction

!Ÿ
Within city streets, the current posi-
tion may be displayed on the oppo-
site side or on an off-road position

!Ÿ
When changing the zoom level
from maximum to a different level,
the current position may become
displayed on a different road

!Ÿ
If the vehicle is loaded onto a ferry
or a car transport vehicle, the cur-
rent position may become stalled
on the last position prior to loading

!Ÿ
When driving on a spiral-shaped
road

!Ÿ
When driving in mountain regions
with sharp turns or sudden brakes

!Ÿ
When entering a road after passing
an underground parking structure,
building parking structure, or roads
with many rotations

!Ÿ
When driving in heavy traffic with
frequent starts and stops
!Ÿ
When driving under slippery condi-
tions, such as heavy sand, snow, etc.

!Ÿ
When driving on spiral-shaped roads

!Ÿ
When the tires have recently been
replaced (Especially upon use of
spare or studless tires).

!Ÿ
When using tires of improper size

!Ÿ
When the tire pressure for the 4 tires
are different

!Ÿ
When the replacement tire is worn or
used (Especially studless tires having
passed a second season).

!Ÿ
When driving near high-rise buildings

!Ÿ
When a roof carrier has been installed

!Ÿ
When a long distance route is calcu-
lated while driving on an expressway
In such cases, continued driving will
automatically enable the system
to conduct map matching or use
updated GPS information to provide
the current position (In such cases, up
to several minutes may be required)
Correct route guidance may not occur due to search conditions
or driving position.
The following occurrences are not malfunctions :

!Ÿ
Guidance to go straight may be
given while driving on a straight
road

!Ÿ
Guidance may not be given even
when having turned at an inter-
section

!Ÿ
There are certain intersections in
which guidance may not occur

!Ÿ
A route guidance signaling for
a u-turn may occur in some No
u-turn intersections
!Ÿ
Route guidance signaling
entrance into a No-entry zone
may occur (No-entry zone, road
under construction, etc.)

!Ÿ
Guidance may be given to a posi-
tion that is not the actual destina-
tion if roads to reach the actual
destination do not exist or are too
narrow

!Ÿ
Faulty voice guidance may be
given if the vehicle breaks away
from the designated route. (e.g. if
a turn is made at an intersection
while the navigation provided
guidance to go straight.)
These situations may occur after conducting route calculation.
The following occurrences are not malfunctions :

!Ÿ
Guidance may be given to a
position differing from the current
position when turning at an inter-
section

!Ÿ
When driving in high speeds,
route recalculation may take a
longer period of time

!Ÿ
Route guidance signaling for a
u-turn may occur in some No
u-turn intersections
!Ÿ
Route guidance signaling entrance
into No-entry zone may occur.
(No-entry zone, road under construc-
tion, etc.)

!Ÿ
Guidance may be given to a position
removed from the actual destination
if roads to reach the actual destina-
tion do not exist or are too narrow

!Ÿ
Faulty voice guidance may be given
if the vehicle breaks away from the
designated route (e.g. If a turn is
made at an intersection while the
navigation provided guidance to go
straight.)
)@-'.:@(<64"@/>
1BSUJOEE


 )@-'.:@(<64"@/>
1BSUJOEE


 

Copyright for Brand Icon Copyright for Brand Icon
The marks of companies displayed by this product to indicate business locations are the marks of their respective owners. The use of
such marks in this product does not imply any sponsorship, approval, or endorsement by such companies of this product.
Copyright for Junction ViewCopyright for Junction View
Junction View Data provided by ZENRIN USA, INC. Copyright(C) 20XX, All rights Reserved.
)@-'.:@(<64"@/>
1BSUJOEE


 )@-'.:@(<64"@/>
1BSUJOEE


 

6-2 I Voice Recognition
What is Voice Recognition?
Voice recognition technology runs the sys-
tem as ordered by recognizing your voice
command for operation of the multimedia
while y ou are dr iving the car

.
Regretfully, not all possible voice com-
mands are recognized by the system due
to technological limitations. To make up for
these limitations, the system displays the
voice commands that are available for you
to use.
There are errors in communication between
people. Likewise, voice recognition some-
times misunderstands your voice command
in some circumstances. If this happens,
either check the screen for the available
options and say the command again, or
manually select and press the button for the
corresponding command on the screen.
Precautions Required
for Successful Voice
Recognition
1. Voice recognition supports only the
commands that are displayed on the
screen and written in the User's Guide.
2. To ensure the correct recognition and
execution of your command, say your
command when you hear the beep after
a voice prompt.
3. Voice recognition automatically ends if:
1) A call is incoming or outgoing
2) A media (USB or iPod, etc.) is con-
nected or disconnected
3) The front or rear view camera is
operated (optional)
4) The car engine starts or stops
5) A system key, such as
RADIO key
or
MEDIA key is selected
6) An emergency occurs, for example
re-searching for the route after the
navigation route has been lost 4.
The microphone that recognizes your
voice is located over the head part in
the driver's seat. To make your com-
mands better understood, keep your
body straight in the driver's seat when
speaking the command.
5. Speaking naturally and clearly will
ensure better recognition of your voice
commands.
6. In the following cases voice recognition
will be affected by ambient noise.
1) The sound of the wind if any win-
dow or the sun roof is open.
2) High speed blower from the air
v ents.

Set climate control to blow
lower than level 3.
3) Vibrations from passing through a


tunnel.
4) Vibrations from driving on an
uneven road.
5) Storms and heavy rain.
Voice Recognition
)@-'.:@(<64"@/>
1BSUJOEE


 )@-'.:@(<64"@/>
1BSUJOEE