Using an AUX source
It is possible to use auxiliary equipment
with unit.
1. Press “MEDIA” until “AUX” screen
appears.
2. Connect an auxiliary device to the
AUX connector, then activate the
auxiliary function.Note
• Some auxiliary devices that don’t have
the video source may not output the
video screen.
• In case of some iPod devices, Use the
iPod cable for exclusive use of iPod for
video playback when connecting iPod
to the AUX connector.
• Video is not available while driving.
(Based on the traffic regulation, Aux
Video is only available whenever vehi-
cle is in stop condition with parking
brake.)
Adjusting the video screen
(Default : Center)
For safety reasons, the video screen
cannot be viewed while your vehicle is in
motion. To view video screen, you must
stop in a safe place and put on the
handbrake.
1. Touch the screen on the aux video
mode.
2. Touch “AUX” on the screen.
3. Select the item you want to adjust.
- Brightness: Touch
or to adjust
the brightness of screen.
- Contrast: Touch
or to adjust
the contrast of screen.
- Saturation: Touch
or to adjust
the saturation of screen.
Note
Touch [Center] to return to the default
settings.
55
Auxiliary device operation
AUX Audio
AUX Video
