GETTING STARTED
Quick Reference Guide I 03
02 I Quick Reference Guide
Driver’s door Lock / UnlockSmart key must be within 28~40 in.
from the outside door handle.Press:
Once – Unlock driver door
Twice – Unlock all doors
Third – Lock all doorsLockUnlockTrunk unlock Panic
NOTE: User selectable option see
Owner’s Manual for more detail.NOTE:
The key hole is located under
the key hole cover
B.
SMART KEY
AB
Remove mechanical key.Press and hold the release button
A
to remove the mechanical key
GENESIS HYUNDAI FRONT SEAT
2
Forward and backward
1
Seat cushion length
(for driver’s seat)
2
Seatback angle
3
Seat cushion height
1
Lumbar support
4
Seat bolster adjustment
(for driver’s seat)
5
1
3
45
Quick Reference Guide I 13
FEATURES AND CONTROLS
12 I Quick Reference Guide CHILD-PROTECTOR REAR DOOR LOCK
Lock Insert a screwdriver into the hole and
turn it to the lock position.UnlockInsert a screwdriver into the hole and turn it
counterclockwise to unlock position.
HOMELINK WIRELESS CONTROL SYSTEMStandard Programming To program most devices, follow these instructions:
1. For first-time programming, press and hold the two outside buttons,
HomeLink
® Channel 1 and Channel 3 Buttons, until the indicator light
begins to flash (after 10 seconds). Release both buttons. Do not hold
the buttons for longer than 20 seconds.
2. Position the end of your hand-held transmitter 1-3 inches (2-8 cm)
away from the HomeLink
® buttons while keeping the indicator light
in view.
3. Simultaneously press and hold both the HomeLink
® and hand-held
transmitter button. DO NOT release the buttons until step 4 has
been completed.
4. While continuing to hold the buttons the red indicator Status LED
will flash slowly and then rapidly after HomeLink
® successfully trains
to the frequency signal from the hand-held transmitter. Release both
buttons.
For detail instructions, refer to your Owner’s Manual or visit
www.homelink.com.
GENESIS HYUNDAI
Smart TrunkTrunk will open automatically when
detecting smart key within range near the
trunk for more than 3 seconds.To enable Smart Trunk function:Vehicle must be in P (Park) to adjust
settings in the User Setting mode.
1. Select "Door/Trunk" in the User Settings
in the instrument cluster.
2. Check "Smart Trunk".NOTE: Function is active after 15 seconds
when all doors are closed and locked. The
vehicle will also provide an audible and visual
alarm while activating. For more details, refer
to Owner's Manual.
Factory setting defaults Smart Trunk in OFF
position.
