2016 Hyundai Genesis buttons
[x] Cancel search: buttonsPage 4 of 22
GETTING STARTED
Quick Reference Guide I 05
04 I Quick Reference Guide HEADREST ADJUSTMENT
To Raise Headrest:
Pull headrest up.
To Lower Headrest:
Press lock button while pressing
down on headrest.
To Adjust Headrest Forward:
Pull forward to 1 of 3 positions
To Adjust Backward:
Pull it fully forward to the farthest
position and release it.
To Raise Center Headrest:
Rotate headrest forward.
Lift headrest up.
To Lower Center Headrest:
Press lock button while pressing
down on headrest.
Press button to rotate headrest
down.
GENESIS
HYUNDAI
With the ignition OFF and foot OFF of
brake pedal,
press the engine start
/
stop button. r Once for ACC(Accessory) mode. r Twice for ON mode. r Three times for OFF.
ENGINE START/STOP BUTTONTo start the engine in any mode(including OFF), press
the engine start / stop button while pressing the brake pedal.
To shut the engine OFF, place shift lever in P(Park) and press
the engine start / stop button again.Emergency situations Shut off engine while drving
Press and hold engine start/stop button for more than 2 seconds or press
3 times consecutively within 3 seconds.
Restart engine while driving
Press engine start/stop button with shift lever in N(Neutral).
Storing
1. Adjust the driver’s seat, outside
rearview mirrors, steering wheel,
instrument panel illumination and
head up display.
2.
Press the SET button. The
system
will beep once.
3.
Press one of the memory buttons
(1 or 2) within 5 seconds.
The system will beep twice. Recalling
Press the desired memory button
(1 or 2). The system will beep once.
Resetting
1. Set the ignition to the ON
position, gear in the P (Park)
position, and open driver’s door.
2. Set the driver’s seat and
seatback to the foremost
position.
3. Simultaneously press the SET
button and push the control
lever to forward for 2 seconds.DRIVER POSITION MEMORY SYSTEM
NOTE:
Transmission must be in P(Park).
SEAT BELT ADJUSTMENT (Front seat)
Pull up to raise.Press button and
push down to lower.
A
A
Rear center headrest
Page 8 of 22
Quick Reference Guide I 13
FEATURES AND CONTROLS
12 I Quick Reference Guide CHILD-PROTECTOR REAR DOOR LOCK
Lock Insert a screwdriver into the hole and
turn it to the lock position.UnlockInsert a screwdriver into the hole and turn it
counterclockwise to unlock position.
HOMELINK WIRELESS CONTROL SYSTEMStandard Programming To program most devices, follow these instructions:
1. For first-time programming, press and hold the two outside buttons,
HomeLink
® Channel 1 and Channel 3 Buttons, until the indicator light
begins to flash (after 10 seconds). Release both buttons. Do not hold
the buttons for longer than 20 seconds.
2. Position the end of your hand-held transmitter 1-3 inches (2-8 cm)
away from the HomeLink
® buttons while keeping the indicator light
in view.
3. Simultaneously press and hold both the HomeLink
® and hand-held
transmitter button. DO NOT release the buttons until step 4 has
been completed.
4. While continuing to hold the buttons the red indicator Status LED
will flash slowly and then rapidly after HomeLink
® successfully trains
to the frequency signal from the hand-held transmitter. Release both
buttons.
For detail instructions, refer to your Owner’s Manual or visit
www.homelink.com.
GENESIS HYUNDAI
Smart TrunkTrunk will open automatically when
detecting smart key within range near the
trunk for more than 3 seconds.To enable Smart Trunk function:Vehicle must be in P (Park) to adjust
settings in the User Setting mode.
1. Select "Door/Trunk" in the User Settings
in the instrument cluster.
2. Check "Smart Trunk".NOTE: Function is active after 15 seconds
when all doors are closed and locked. The
vehicle will also provide an audible and visual
alarm while activating. For more details, refer
to Owner's Manual.
Factory setting defaults Smart Trunk in OFF
position.
Page 14 of 22
STEERING WHEEL AUDIO CONTROL
23
1
1 VOLUME/MUTE
Scroll up or down to adjust the volume.
Press to mute or unmute the sound.2 SEEK/PRESET Change station.3 MODE
Change the audio source.
To Answer a Call:
t Press
button on the steering wheel.
To Reject a Call:
t Press
button on the steering wheel.
To Adjust Ring Volume:
t Use the VOLUME buttons on the steering wheel.
To Transfer a Call to the Phone
(Secret Call):
t Press and hold
button on the steering wheel until the
audio system transfers a call to the phone.
To Finish a Call:
t Press
button on the steering wheel.
BLUETOOTH OPERATIONAL TIPSIn the following situations you or the other party may have difficulty
hearing each other:
1. When Bluetooth volume is set too high. High volume may result in
distortion and echo.
2. When driving on a rough road, high speeds and/or with the window open.
3. When the air conditioning vents are facing the microphone and/or when
the air conditioning fan is at the max speed.Steering wheel bluetooth control
1 TALK
Activates voice recognition.2 CALL
Places and transfers calls.3 END
Ends calls or cancels functions.
2
3
1
Making a call using voice recognition: The menu tree identifies available voice recognition Bluetooth®
functions.Calling by Name:1. P
ress
button.
2. Say the following command after the Voice Recognition beep:
<00720001006900240042004d004d0001001d002b00500049004f00010034004e004a00550049001f0075001b000100240050004f004f00460044005500540001005500490046000100440042004d004d0001005500500001002b00500049004f0001003400
4e004a00550049000f>
r i $ B M M + P I O 4 N J U I P O P O . P C J M F J O 0 G
Page 16 of 22
Quick Reference Guide I 29
FEATURES AND CONTROLS
28 I Quick Reference Guide
GENESIS HYUNDAI
Scrolling through ControllerMove the focus or scroll through the
navigation map.Turning the controllerMove the focus, or zoom in/out the
navigation map.Pressing the controllerStart/Select the focused feature.
CENTRAL CONTROL PANEL CLOCK ADJUSTMENTThe central control panel is located in the vehicle center console.
It comprises the controller and the main function buttons.
Open the HOME
main menu
Open menu screen
Go back
one menu
levelOpen the
Navigation main
menu
Open the Bluelink
main menu Open the
PHONE main
menuMAP/VOICE
button
1. Press "HOME" button.
1. Press the "SETUP" button. 2. Press "Settings" icon on the screen, then press "Clock".
3. To set your preferred Time Setting:
t $ I F D L ( 1 4 5 J N F U P B E K V T U U I F U J N F B V U P N B U J D B M M Z
t 1 S F T T i 5 J N F 4 F U U J O H w U P B E K V T U U I F D M P D L N B O V B M M Z ( 1 4 5 J N F N V T U
not be selected.
t * G % B Z M J H I U 4 B W J O H T 5 J N F J T T F M F D U F E
U I F D M P D L X J M M C F B E K V T U F E
forward by one hour.
2. Press "Clock" icon on the screen.
3. To set your preferred Time Setting:
t $ I F D L ( 1 4 5 J N F U P B E K V T U U I F U J N F B V U P N B U J D B M M Z
t 1 S F T T i % B U F 5 J N F 4 F U U J O H w U P B E K V T U U I F D M P D L N B O V B M M Z
GPS Time must not be selected.
t * G % B Z M J H I U 4 B W J O H T 5 J N F J T T F M F D U F E
U I F D M P D L X J M M C F B E K V T U F E
forward by one hour. With DIS Touch System
With Touch Screen SystemNOTE:
Once the digital clock is adjusted, the analog
clock will be updated accordingly.