2016 Hyundai Elantra Quick Reference Guide

(
) : Depress the brake pedal when shifting.
(
) : The shift lever can be moved freely.
(
) : Depress the brake pedal and press the
lock out button to shift.Sport mode

Move the shift lever from D to
the left gate to select.
Move the shift lever forward (+)
to upshift or rearward (–) to downshift.
+ (UP)+ (UP)- (DOWN)- (DOWN)
 30
ELANTRA HYUNDAI
FEATURES AND CONTROLS
SEAT WARMER
AUTOMATIC TRANSMISSIONShifting into Reverse

1. Depress the clutch pedal fully.
2. Ensure shifter is in Neutral.
3. Press the reverse lock-out button and move the shift lever
left and forward into Reverse.
4. Release clutch slowly for smooth acceleration.
MANUAL TRANSMISSION
Front seatRear seat
Standard Radio
Navigation
Push the button to warm the seat.
Push button again to turn off.
1. Press INFO/SETUP button.
2. Select SETUP.
3. Select Clock.Push desired button to warm the seat.
OFF
HIGH ( )
LOW ( )
CLOCK ADJUSTMENT
Hour Pressing the H button will advance
the time displayed by one hour.Minute Pressing the M button will advance
the time displayed by one minute.
Press the H and M buttons at the same time for more than 5 seconds to
toggle between 12- and 24-hour formats.

The ESC system is an electronic system
designed to help the driver maintain
vehicle control under adverse conditions.r To turn the ESC off, press the button.
Indicator will illuminate on the instrument
cluster.r To turn ESC on, press it again.r System defaults to ON position at start.
ELECTRONIC STABILITY CONTROL (ESC)
33 32
ELANTRA HYUNDAI
TIRE PRESSURE MONITORING SYSTEM (TPMS)Low Tire Pressure Indicator Illuminates if one or more of your tires is significantly under-inflated. TPMS Malfunction Indicator
Blinks for approximately one minute then remains illuminated when
there is a malfunction with the TPMS system. Have
the system checked
by an authorized Hyundai dealer.
NOTE
Tire pressure may vary in colder temperatures causing the low tire
pressure light
to illuminate.
Low Tire Pressure Indicator /
TPMS Malfunction Indicator
ACTIVE ECO SYSTEM
Active ECO system
(automatic transmission)Active ECO system helps to improve fuel
efficiency. When the Active ECO system
is activated, the vehicle acceleration,
gear shift points and air conditioning
performance will be reduced to conserve
the fuel consumption.
Press the Active ECO button to activate.
The LED on the button and the ECO
indicator in the instrument cluster will
illuminate.ECO Shift (Manual Transmission)
or
symbol is displayed along with
the current gear position, which informs
you to up shift or down shift to the next
recommended gear position for fuel
efficiency.
FEATURES AND CONTROLS
To improve your fuel efficiency:<0074000100250053004a0057004600010054004e0050005000550049004d005a00010042004f004500010042004400440046004d00460053004200550046000100420055000100420001004e00500045004600530042005500460001005300420055004600
0f00010001>
t
"WPJE
IFBWZ
BDDFMFSBUJPOT
t
.BJOUBJO
TUFBEZ
DSVJTJOH
TQFFE
t
"EKVTU
UIF
WFIJDMF
TQFFE
UP
UIF
USBGmD
DPOEJUJPO
BOE
BWPJE
TQFFE
DIBOHFT
t
"WPJE
VOOFDFTTBSZ
CSBLJOH
t
,FFQ
UIF
UJSFT
JOnBUFE
UP
UIF
SFDPNNFOEFE
UJSF
QSFTTVSF

t
%POU
JEMF
UIF
FOHJOF
MPOHFS
UIBO
OFDFTTBSZ

35 34
ELANTRA HYUNDAI
REARVIEW CAMERA
The rearview camera will activate
when the ignition switch is turned
ON and the shift lever is in the R
(Reverse) position.
Rearview display
CHILD-PROTECTOR REAR DOOR LOCK
Lock (
)
Only allows opening the
rear door handle from
outside of the vehicle. Insert a key into the hole and
turn it to the following positions:Unlock (
)
Allows opening the rear
door handle from inside
and outside the vehicle.
00 10123
4
5
6 20304050
60
70
80
or
ENGINE
START
STOP
321
0
TIRE MOBILITY KIT
0 10 20304050min 2.2 bar/ 32 psi
60
70
80
90
FEATURES AND CONTROLS
Setup1. Remove the speed restriction label
from the sealant bottle and place it on
the center of the steering wheel.
2. Ensure that the compressor is
switched to OFF.
3. Lift the cable cover
and screw the
compressor hose on to the
connector of the sealant bottle.
4. Insert the sealant bottle into the
housing slot
of the compressor.
5. Screw the filling hose
of the sealant
bottle onto the tire’s valve stem.
6. Insert the compressor power plug

into the vehicle’s power outlet.
7. Turn the ignition switch to the ON
position or press the Engine Start/Stop
button twice.
Inflate Tire1. Switch ON the compressor and let it
run for approximately 5 minutes.
2. Switch OFF the compressor and check
to ensure that inflation pressure is over
32 psi. If not, the puncture is too large
to repair. Contact Hyundai Roadside
Assistance.
3. Remove the filling hose
,
compressor hose
,
and compressor power plug
.
continued on next page... lll

37 36
ELANTRA HYUNDAI
80max km/h50max mph
min 2.2 bar/ 32 psi
0 10 20304050
60
70
80
90
00 10123
4
5
6 20304050
60
70
80
TIRE MOBILITY KIT (CONT)
Recheck Tire Pressure1. Screw the compressor hose

directly to the tire valve.
2. Insert the compressor power plug
into the vehicle’s power outlet.
3. Adjust to the recommended tire
pressure located on the driver side
door jam placard.
To increase the tire pressure:
1. Switch ON the compressor.
2. To check the current tire
pressure, briefly switch OFF
the compressor.
To reduce the tire pressure:
1. Loosen the knob
on the
gauge. Tighten the knob
to
set tire pressure.
REAR SEAT FOLDING
FEATURES AND CONTROLS
KEY WEBSITES Hyundai website -
www.hyundai.com

Hyundai owner website -
www.myhyundai.com

Bluetooth phone compatibility -
www.hyundaiusa.com/bluetooth
Drive Vehicle1. Drive for approximately 6 miles or
10 minutes no faster than 50 mph.
BEFORE DELIVERY☐ CONFIRM “GOOD BATTERY” USING GR8 AND STAPLE
TEST TICKET HERE☐
SET TIRE PRESSURE LF RF RR LR ☐ VERIFY VEHICLE IS CLEAN, IN GOOD CONDITION,
FREE OF CHIPS AND SCRATCHES · CLEAN WINDSHIELD
AND BACK WINDOW☐ ENSURE FLOORMATS ARE SNAPPED INTO PLACE
ELANTRA CUSTOMER DELIVERY CHECK LIST HYUNDAI OWNER DEALERSHIP NAME SALES CONSULTANT DATE VIN PREVIOUS VEHICLE

4BMFT
$POTVMUBOU
%BUF Sales Manager Date


$VTUPNFS


%BUF
Email
@